최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.32 no.9, 2015년, pp.833 - 840
김형석 (순천향대학교 기계공학과) , 권계시 (순천향대학교 기계공학과)
Inkjet technology is one of the commonly used technologies in the printed-electronics field. The primary issue regarding the usage of inkjet technology as a printed-electronics tool is the printing resolution; therefore, to print complicated patterns of precise dimensions, we developed software that...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
일반적으로 잉크젯 프린팅을 위해 어떠한 방법을 사용하는가? | 일반적으로 잉크젯 프린팅을 위해서 비트맵 이미지를 사용한 래스터 프린팅 방법을 널리 사용한다. 그러나 비트맵 이미지는 화소의 개수와 화소에서의 밝기 정보만 존재하고 별도의 물리적인 길이 등의 치수 정보가 없다. | |
캐드를 이용한 프린팅 방법에는 무엇이 있는가? | 캐드를 이용한 프린팅 방법에는 캐드의 도면을 비트맵 이미지 (bitmap image)로 변환하여 프린팅하는 래스터 프린팅 (raster printing) 방법과 캐드의 디엑스에프 (drawing exchange file format, DXF) 파일의 정보를 사용하여 프린팅 하는 벡터 프린팅 (vector printing) 방법이 있다. 디엑스에프 파일은 아스키(ASCII) 형태의 파일로 다양한 캐드 간의 도면 교환에 널리 사용되는 파일 방식으로 도면의 치수 및 선 종류 등의 모든 도면 정보를 가지고 있는 파일이다. | |
잉크젯 프린팅을 위해 사용되는 비트맵 이미지의 단점은 무엇인가? | 일반적으로 잉크젯 프린팅을 위해서 비트맵 이미지를 사용한 래스터 프린팅 방법을 널리 사용한다. 그러나 비트맵 이미지는 화소의 개수와 화소에서의 밝기 정보만 존재하고 별도의 물리적인 길이 등의 치수 정보가 없다. 또한 복잡한 패턴을 효과적으로 비트맵 이미지로 표현하는 어려움이 추가적으로 존재한다. 프린팅을 위하여 복잡한 패턴을 만들기 위하여 캐드를 사용하는 방법이 널리 사용 된다. |
Kwon, K.-S. and Kim, W., "A Waveform Design Method for High-Speed Inkjet Printing Based on Self-Sensing Measurement," Sensors and Actuators A: Physical, Vol. 140, No. 1, pp. 75-83, 2007.
Creagh, L. T., McDonald, M., and Letendre, W., "Ink Jet Printhead as a Precision Deposition Tool in Manufacturing FPDs," Equipment for Electronic Products Manufacturing, Vol. 8, pp. 9-14, 2004.
Kwon, K. S., "Vision Monitoring," in: Inkjet-Based Micromanufacturing, Korvink, J. G., Smith, P. J., and Shin, D.-Y., (Eds.), Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany, pp. 127-144, 2012.
Kwon, K.-S., "Speed Measurement of Ink Droplet by Using Edge Detection Techniques," Measurement, Vol. 42, No. 1, pp. 44-50, 2009.
Kwon, K. S., "Development of a Test Stand for Measuring Ink Jetting Performance," J. Korean Soc. Precis. Eng., Vol. 25, No. 8, pp. 45-50, 2008.
Kwon, K.-S., "Experimental Analysis of Waveform Effects on Satellite and Ligament Behavior via in Situ Measurement of the Drop-on-Demand Drop Formation Curve and the Instantaneous Jetting Speed Curve," Journal of Micromechanics and Microengineering, Vol. 20, No. 11, Paper No. 115005, 2010.
Oh, J. H., Kim, S. K., Yoon, H. Y., Oh, S. I., Kang, Y. M., et al., "Multi-Head Inkjet Patterning System for Manufacturing a Full Color Polymer Light Emitting Device (pLED)," Proc. of the Korean Society of Mechanical Engineers Spring Conference, pp. 1219-1225, 2003.
Kwon, K. S., Go, J. K., and Kim, J. W., "Development of Inkjet Printing System for Printed Electronics," Transactions of the Korean Society of Mechanical Engineers: A, Vol. 35, No. 10, pp. 1537-1542, 2010.
Kwon, K. S. and Ready, S., "Practical Guide to Machine Vision Software: An Introduction with LabVIEW," Wiley-VCH, pp. 33-74, 2014.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.