최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국동력기계공학회지 = Journal of the korean society for power system engineering, v.19 no.4, 2015년, pp.17 - 23
김석수 (부경대학교 대학원 안전공학과) , 강지웅 (대구한의대학교 보건학부) , 권오헌 (부경대학교 안전공학과)
Because of the energy resources shortage and global pollution, the wind power systems have been developed consistently. Among the components of the wind power system, the rotor blades are the most important component. Generally it is made of GFRP material. Recently, GFRP material has been replaced b...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
풍력발전기은 어떻게 구성되어 있는가? | 대체에너지원으로서 바람이 가지고 있는 자연 에너지를 유용한 전기에너지로 변환시켜주는 풍력발전기는 회전력을 변환시켜주는 블레이드와 너셀부 및 타워로 구성된다. 구성품 중에서 여러 기술의 복합체인 블레이드는 고속 회전하므로 사고의 위험에 가장 많이 노출되게 된다. | |
블레이드의 변형 및 구조적 손상 원인은 무엇인가? | 구성품 중에서 여러 기술의 복합체인 블레이드는 고속 회전하므로 사고의 위험에 가장 많이 노출되게 된다.1) 블레이드의 변형 및 구조적 손상 원인은 환경적 요인에 따라 바람에 의한 압력과 타워 구조에 의해 가해지는 힘과 모멘트이다. 특히 태풍의 규모가 커지고 빈도수가 증가하면서 바람에 의한 예기치 않는 극한하중과 연속적인 하중을 받아 블레이드에 미치는 영향이 손상 발생에 주요인이 됨에 따라 블레이드 강도 향상에 관한 연구는 매우 중요하게 되었다. | |
연성해석에서 One-Way FSI와 Two-Way FSI는 각각 무엇인가? | 연성해석 즉 FSI(Fluid-Structure Interaction) 해석은 크게 One-Way FSI와 Two-Way FSI 두 가지 해석이 있다. One-Way FSI는 유동에 의해 발생하는 변위가 큰 영향을 미치지 않는 경우에 사용하고, Two-Way FSI는 유연한 구조물에서 유동장의 영향에 의해 변위가 큰 영향을 받는 경우에서 반복계산이 필요한 수법이다.10) 바람에 의한 블레이드 변위가 유동장에 영향이 크지 않는 로터 블레이드는 One-way FSI 기법으로 해석하는 것이 바람직하다. |
I. S. Yang, S. W. Kim and N. H. Kyong, 2005, "A Classification of the Wind Turbine Accident", Journal of the Korean Solar Energy Society, Vol. 25, No. 4, pp. 29-35.
P. Gipe, 2001, "Wind Energy-The Breath of life or the Kiss of Death", Contemporary Wind Mortality Rates, http://www.wind-works.org.
J. S. Kwak and Y. K. Park, 2013, "Strength Assessment for Multi-megawatt Wind Turbine Blade", The Spring Proceeding of KSME CAE & Applied Mechanics, KSME 13CA-Th03A-4, pp. 141-142.
J. S. Park, J. K. Park and B. S. Hwang, 2011, "Development and Construction of Static and Fatigue Test System for Multi-megawatt Wind Turbine Blade in Korea", Journal of Drive and Control, Vol. 8, No. 1, pp. 50-54.
Y. G. Kim and K. C. Kim, 2005, "Computation of Fluid-Structure Interaction on a Blade used in Wind Power", Journal of The Korean Society for New and Renewable Energy, Vol. 4, No. 1, pp. 698-701.
K. M. Almohammadi, D. B. Ingham and L. Ma, 2013, "Computational Fluid Dynamics Mesh Independency Techniques for a Straight Blade Vertical Axis Wind Turbine", Energy, Vol. 58, pp. 483-493.
O. K. Yu and O. J. Kwon, 2014, "Predicting Wind Turbine Blade Loads and Aeroelastic Response using a Coupled CFD-CSD Method", Renewable Energy, Vol. 70, pp. 184-196.
L. Li, Y. H. Li, Q. K. Liu and H. W. Lv, 2014, "Flapwise Non-linear Dynamics of Wind Turbine Blades with Both External and Internal Resonances", International Journal of Non-Linear Mechanics, Vol. 61, pp. 1-14.
I. S. Han, D. S. Kim, J. Y. Lee, O. H. Kim and T. H. Park, 2011, "Para-Aramid Fiber Developments of Trends", Fiber Technology and Industry, Vol. 15, No. 1. pp. 7-15.
F. K. Benra, H. J. Dohmen, J. Pei, S. Schuster and B. Wan, 2011, "A Comparison of One-Way and Two-Way Coupling Methods for Numerical Analysis of Fluid-Structure Interactions", Journal of Applied Mathematics, Vol. 2011, Article ID 853560, pp. 1-16.
W. Y. Jeong, 2011, "The Study of Strength Improvement of The Composite Material Blade for The Health ensurance of Wind Turbine System", Dissertation of M. D., Pukyong National University.
F. R. Menter, 1993, "Zonal Two Equation k- ${\omega}$ Turbulence Models for Aerodynamic Flows", AIAA Paper 93-2906.
K. H. Bergey, 1980, "The Lanchester-Betz Limit", Journal of Energy, Vol. 3, No. 6, pp. 382-384.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.