최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국콘텐츠학회논문지 = The Journal of the Korea Contents Association, v.15 no.9, 2015년, pp.384 - 394
안재석 (광주보건대학교 치기공과) , 노형록 (전북대학교 치의과학과) , 이정환 (광주보건대학교 치기공과)
The purpose of this study was to evaluate the push-shear bond strength between five commercial zirconia veneering ceramics and zirconia core cylinder, and to investigate the effect of biaxial flexural strength and zirconia liner glass treatments. The biaxial flexural strengths of the veneering ceram...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
G. Isgro, P. Pallav, J. M. van der Zel, and A. J. Feilze, "The influence of the veneering porcelain and different surface treatments on the biaxial flexural strength of a heat-pressed ceramic", J Prosthet Dent, Vol.90, No.5, pp.465-73, 2003.
M. Guazzato, T. R Walton, W. Franklin, G. Davis, C. Bohl, and I. Klineberg, "Influence of thickness and cooling rate on development of spontaneous cracks in porcelain/zirconia structures", Australian Dental Journal, Vol.55, No.3, pp.306-310, 2010.
M. V. Swain, "Unstable cracking (chipping) of veneering porcelain on all-ceramic dental crowns and fixed partial dentures", Acta Biomaterials, Vol.55, No.5, pp.1668-1677, 2009.
M. Tholey, N. Thiel, S. Schindler, S. Rues, and J. Lenz, "Temperaturgradienten in Kronen mit Gerusten aus Zirkoniumdioxid (Y-TZP). Quintessenz der Zahntechnik", Vol.36, No.9, pp.1184-1198, 2010.
A. Sundh and G. Sjogren, "Fracture resistance of all-ceramic zirconia bridges with differing phase stabilizers and quality of sintering", Dent Mater, Vol.22, No.8, pp.778-784, 2006.
R. P. Christensen and B. J. Ploeger, "A clinical comparison of zirconia, metal and alumina fixed-prosthesis frameworks veneered with layered or pressed ceramic: a three-year report," Journal of the American Dental Association, Vol.141, No.11, pp.1317-1329, 2010.
P. C. Guess, A Kulis, S. Witkowski, M. Wolkewitz, Y. Zhang, and J. R. Strub, "Shear bond strengths between different zirconia cores and veneering ceramics and their susceptibility to thermocycling", Dental Materials, Vol.24, No.11, pp.1556-1567, 2008.
N. Z. Fahmy, "Bond strength, microhardness, and core/veneer interface quality of an all-ceramic system", Journal of Prosthodontics, Vol.19, No.2, pp.95-102, 2010.
ASTM Standard F394-78, STM Annual Book of Standards, Vol. 15.02, Section 16. American Society for Testing and Materials, Philadelphia, PA, pp.466-490, 1996.
C. W. Fairhust, P. E. Lockwood, R. D. Ringle, and W. O. Thompson, "The effect of glaze on porcelain strength", Dent Mater, Vol.8, No.3, pp.203-207, 1992.
J. S. Shell and J. P. Neilsen, "Study of the bond between gold alloys and porcelain", J Dent Res, Vol.41, pp.1424-1437, 1962.
M. Dundar, M. Ozcan, B. Gokce, E. Comlekoglu, F. Leite, and L. F. Valandro, "Comparison of two bond strength testing methodologies for bilayered all-ceramics", Dent Mater, Vol.23, No.5, pp.630-636, 2007.
J. S. Shell and J. P. Neilsen, "Study of bond strength of dental porcelain fired to metal", Dent Res, Vol.23, No.5, pp.32-36, 1996.
D. H. Anthony, A. P. Burnett, and D. L. Smith, "Brooks MS. Shear test for measuring bonding in cast gold alloy-porcelain composites", J Dent Res, Vol.49, No.15, pp.27-33, 1970.
H. M. Al-Dohan, P. Yaman, J. B. Dennison, M. E. Razzoog, and B. R. Lang, "Shear strength of core-veneer interface in bi-layered ceramics", J Prosthet Dent, Vol.91, No.4, pp.349-355, 2004.
J. R. Kelly, J. A. Tesk, and J. A. Sorensen, "Failure of all-ceramic fixed partial dentures in vitro and in vivo: analysis and modeling", J Dent Res, Vol.74, No.6, pp.1253-1258, 1995.
M. N. Aboushelib, C. J. Kleverlaan, and A. J. Feilzer, "Microtensile bond strength of different components of core veneered all-ceramic restorations. Part II: Zirconia veneering ceramics," Dent Mater, Vol.22, No.9, pp.857-863, 2006.
M. N. Aboushelib, A. J. Feilzer, and C. J. Kleverlaan, "Bridging the gap between clinical failure and laboratory fracture strength tests using a fractographic approach", Dental Materials, Vol.25, No.3, pp.383-391, 2009.
S. M. Weger and M. Kern, "Long-term resin bond strength to zirconia ceramic", J Adhes Dent, Vol.2, No.2, pp.139-147, 2000.
M. Cheng, W. Chen, and K. R. Sridhar, "Biaxial flexural strength distribution of thin ceramic substrates with surface defects", International Journal of Solid and Structure. Vol.40, No.9, pp.2249-2266, 2003.
S. Ban and K. J. Anusavice, "Inflence of test method on failure stress of brittle dental materials", J Dent Res, Vol.69, No.12, pp.1791-1799, 1990.
J. B. Wachtman, W. Capps, and J. Mandel, "Bi-axial flexure tests of ceramic substrates", J Mater, Vol.7, No.2, pp.188-194, 1972.
J. F. McCabe, and A. W. Walls, "The treatment of results for tensile bond strength testing", J Dent Res, Vol.14, No.4, pp.165-168, 1986.
K. J. Anusavice, C. Shen, B. Vermost, and B. Chow, "Strengthening of porcelain by ion exchange subsequent to thermal tempering", Dent Mater, Vol.8, No.3, pp.149-152, 1992.
ASTM C 1499-03. Standard test method monotonic equibiaxial flexural strength of advanced ceramics at ambient temperature obsolete, America: American society for testing materials, 1999.
J. P. Moffa, A. A. Lugassy, A. D. Guckes, and L. Gettleman, "An evaluation of nonprecious alloys for use with porcelain veneers. Part I. Physical properties", The Journal of Prosthetic Dentistry, Vol.30, No.1, pp.424-431, 1973.
M. N. Aboushelib, N. de Jager, C. J. Kleverlaan, and A. J. Feilzer, "Microtensile bond strength of different components of core veneered all-ceramic restorations", Dent mater, Vol.21, No.10, pp.984-991, 2005.
T. Derand, M. Molin, and K. Kvam, "Bond strength of composite luting cement to zirconia ceramic surfaces", Dent Mater, Vol.21, No.12, pp.1158-1162, 2005.
I. Denry and J. R. Kelly, "State of the art of zirconia for dental applications", Dental materials, Vol.24, No.3, pp.299-307, 2008.
E. Tsalouchou, M. J. Cattell, J. C. Knowles, P. Pittayachawan, and A. McDonald, "Fatigue and fracture properties of yttria partially stabilized zirconia crown systems", Dent Mater, Vol.24, No.3, pp.308-318, 2008.
H. M. Ashkanani, A. J. Raigrodski, B. D. Flinn, H. Heindl, and L. A. Mancl, "Flexural and shear strengths of Zr $O_2$ and a high-noble alloy bonded to their corresponding porcelains", J Prosthet Dent, Vol.100, No.4, pp.274-284, 2008.
B. Kim, Y. Zhang, M. Pines, and V. P. Thompson, "Fracture of porcelain-veneered structures in fatigue", J Dent Res, Vol.86, No.2, pp.142-146, 2007.
P. Benetti, F. Pelogia, L. F. Valandro, M. A. Bottino, and A. D. Bona, "The effect of porcelain thickness and surface liner application on the fracture behavior of a ceramic system", Dental Materials, Vol.27, No.9, pp.948-953, 2011.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.