최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國染色加工學會誌 = Textile coloration and finishing, v.27 no.3, 2015년, pp.165 - 174
박진명 (부산대학교 유기소재시스템공학과) , 박영광 (부산대학교 유기소재시스템공학과) , 이영희 (부산대학교 유기소재시스템공학과) , 서대경 (DYETEC연구원) , 이장훈 (DYETEC연구원) , 김한도 (부산대학교 유기소재시스템공학과)
To develop automobile parts, the unsaturated polyester based matrix resin(PR)/reinforcement(randomly oriented chopped E-glass fiber, GF) composites were prepared using sheet molding compound(SMC) compression molding. The effects of GF length(0.5, 1.0 1.5 and 2.0inch)/content (15, 20, 25, 30wt%) and ...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
복합재료의 기재재 및 강화재의 형태에 따른 분류는? | 복합재료는 크게 분산상인 강화재(reinforcement)와 매트릭스상(연속상)인 기지재(matrix)로 구성되어 있다. 기지재에 따라 고분자, 금속 및 세라믹(polymer, metal, ceramic) 복합재료로 분류되며, 강화재의 형태에 따라서 층, 입자 및 섬유(layers, particles, fibers) 강화복합재료로 분류된다. 고분자 복합재료 중에서 대표적인 섬유강화 플라스틱(fiber reinforced plastic, FRP) 복합재료(composite)는 유리섬유, 탄소섬유 및 아라미드 섬유 등과 같은 섬유 강화재와 불포화 폴리에스터 및 에폭시 수지와 같은 열경화성 수지를 기지재로 구성되어 있다. | |
기지재의 종류와 생산 제품의 형상에 따라 복합재료를 성형하는 방법에는 어떠한 것들이 있는가? | 복합재료의 성형 방법은 주로 그 기지재의 종류와 생산 제품의 형상에 따라서 전혀 다른 공정들이 채택된다. 복합재료의 성형 방법에는 (1)가장 기본적으로 널리 사용되는 오픈 몰드(open mold) 성형법: 핸드레이업(hand lay-up)/스프레이업(spray-up) 성형법, (2)고속 대량 생산에 사용되는 콤프레션 몰딩(compression molding) 성형법: 시트 몰딩 컴파운드(sheet molding compound, SMC)/BMC(bulk molding compound) 성형법, (3)빠른 경화 반응으 로 생산성이 높은 성형방법인 RTM(resin transfer molding)/RIM(reaction injection molding)/RRIM (reinforced reaction injection molding), (4)긴 tu -be, rod 및 channel 등의 제품을 제조하는데 활용되는 펄트루전(pultrusion) 성형법, (5)필라멘트 와인딩(filament winding) 성형법, (6)오토클레이브 (autoclave) 성형법 등이 있다4-7) . SMC는 불포화 폴리에스터와 스티렌모노머, 저수축제, 충진제, 증점제, 라디칼 개시제, 촉매, 이형제 등이 배합된 페이스트(paste)에 약 25. | |
복합재료의 구성은 어떻게 되는가? | 복합재료는 크게 분산상인 강화재(reinforcement)와 매트릭스상(연속상)인 기지재(matrix)로 구성되어 있다. 기지재에 따라 고분자, 금속 및 세라믹(polymer, metal, ceramic) 복합재료로 분류되며, 강화재의 형태에 따라서 층, 입자 및 섬유(layers, particles, fibers) 강화복합재료로 분류된다. |
O. Kalny, R. J. Peterman, and G. Ramirez, Performance Evaluation of Repair Technique for Damaged Fiber-reinforced Polymer Honeycomb Bridge Deck Panels, J. Bridge Eng., 9, 75(2004).
W. H. Han, S. G. An, J. W. Han, and J. W. Park, "High-Tech Materials", Korea Polytechnics, Seoul, pp.110-147, 2012.
E. J. Jun, Processing Technology of Composite Materials, The Korean Society of Mechanical Engineers, 32(11), 18(1992).
S. H. Hwang, Y. C. Lee, and S. W. Lee, Curing Behaviors and Mechanical Properties of Styrene /Unsaturated Polyester System for Sheet Molding Compound, Polymer(Korea), 19(2), 170(1995).
H. C. Chung, A Study on Preparation and Properties of Vinyl Ester Resin Adapted Hybrid SMC, M.S. Thesis, Chonbuk National University, 2010.
P. Vivek, Opportunity for Composite Materials in India: Sheet Molding Compound(SMC) Industry, Polymer/Composites/Chemicals/Life Sciences Market, 10, 20(2010).
W. Li and L. J. Lee, Shrinkage Control of Lowprofile Unsaturated Polyester Resins Cured at Low Temperature, Polym. J., 39, 5677(1988).
J. C. Lucas, J. Borrajo, and R. J. Williams, Cure of Unsaturated Polyester Resins 2, Influence of Low-profile Additives and Fillers on the Polymerization Reaction, Mechanical Properties and Surface Rugosities, Polym. J., 34, 1886(1993).
W. Li and L. J. Lee, Low Temperature Cure of Unsaturated Polyester Resins with Thermoplastic Additive III, Modification of Polyvinyl Acetate for Better Shrinkage Control, Polym. J., 41, 711(2000).
E. Melby and J. Castro, In Comprehensive Polymer Science, Allen, S. G. Ed., Pergamon Press, New York, 1989.
S. U. Khan, A. Munir, R. Hussain, and J. K. Kim, Fatigue Damage Behaviors of Carbon Fiber -reinforced Epoxy Composites Containing Nanoclay, Compos. Sci. Technol., 70, 2077(2010).
R. H. Dauskardt, R. O. Ritchie, and B. N. Cox, Fatigue of Advance Materials, Adv. Mater. Process, 7, 26(1993).
W. Zhang, R. C. Picu, and N. Koratkar, The Effect of Carbon Nanotube Dimensions and Dispersion on The Fatigue Behavior of Epoxy Nanocomposites, Nanotechnology, 19, 285709(2008).
M. H. A. Maamori, R. M. A. Alradha, and A. I. A. Mosawi, Mechanical Properties for Unsaturated Polyester Reinforcement by Glass Fiber using Ultrasonic Technique, Int. J. of Multidisciplinary and Current Research, 1, 1(2013).
N. J. Lee and J. S. Jang, The Effect of Fibre Content on The Mechanical Properties of Glass Fibre Mat/Polypropylene Composites, Composites Part A, 30, 815(1999).
S. Boylan and J. M. Castro, Effect of Reinforcement Type and Length on Physical Properties, Surface Quality and Cycle Time for Sheet Molding Compound(SMC) Compression Molded Parts, J. Appl. Polym. Sci., 90, 2557(2003).
J. H. Lee, J. K. Lee, and K. Y. Rhee, Effects of The Glass Fiber Characteristics on The Mechanical Properties of Thermoplastic Composite, The Korean Society of Mechanical Engineers, 24(7), 1697(2000).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.