최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of the Institute of Electronics and Information Engineers = 전자공학회논문지, v.53 no.12 = no.469, 2016년, pp.82 - 87
김치성 (경북대학교 전자공학부) , 한동석 (경북대학교 전자공학부)
The photoplethysmogram (PPG) signal is one of the mainly considered bio signals along with the electrocardiogram (ECG) signal. PPG signals can be used to estimate the speed of flow of blood in vein, saturation of peripheral oxygen and etc. The heartbeat rate is a common feature in order to evaluate ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
본 연구에서 제안한 주파수 영역 광용적맥파 신호를 이용하여 실시간 맥박을 측정하는 방법의 특징은? | 기존 방법인 시간영역에서 맥박수를 검출하는 방법은 동적 잡음에 민감하여 맥박수를 오검출하는 문제가 발생한다. 제안하는 방법은 동적잡음에 강건하여 주기적인 동적잡음이 크게 발생하지 않은 경우에는 시간영역의 알고리듬을 사용할 때와 달리 맥박수 검출 오차가 작다. 만약 주기적인 동적잡음의 세기가 클 경우에는 주파수 영역에서 맥박 주파수의 첨두치를 동적잡음의 첨두치와 구별하여 선택적으로 가장 가능성이 높은 맥박 주파수를 선택 할 수 있다. 실험은 동적 잡음이 없는 광용적맥파 신호, 순간적인 접촉 불량이 발생한 광용적맥파 신호, 주기적인 동적 잡음이 발생한 광용적맥파 신호의 맥박수를 두 가지 방법으로 검출하여 그 성능을 비교하였다. | |
광용적맥파 신호로 어떻게 맥박수를 측정하는가? | 맥박수는 광용적맥파(PPG: plethysmogram) 신 호, 또는 심전도(ECG: electrocardiogram) 신호를 이용하여 측정 할 수 있다. 광용적맥파 신호는 손가락에 빛을 통과시키거나 반사시켜 빛의 세기가 감소한 정도를 측정하여 혈류량의 변화를 측정하는 방식으로 검출한다[1~2]. 심전도 신호는 심장의 전위 특성을 측정하기 위해 심장 부근에 여러 전극을 사용하여 측정하는데 신호 세기가 약해서 정밀하게 측정되어야 하는 단점이 있다. | |
광용적맥파 신호 측정 시 가장 고려해야될 부분은 무엇인가? | 광용적맥파 신호를 측정 할 때 가장 고려되어야 할 부분은 잡음을 제거하는 부분이다[3]. 광용적맥파 신호는 일반적으로 0. |
T. Tamura, Y. Maeda, M. Sekine, and M. Yoshida, "Wearable photoplethysmographic sensors-Past and Present," Electronics, vol. 3, pp. 282-302, Apr. 2014.
Global.epson.com. (2016). Wearable Technology-Epson. [online] Available at: http://global.epson.com/innovation/engineer/pulse_sensing.html [Accessed 11 Jul. 2016].
Z. Zhang, Z. Pi, and B. Liu, "TROIKA: A general framework for heart rate monitoring using wrist-type photoplethysmographic signals during Intensive Physical Exercise, " IEEE Tran. on Biomedical Engineering, vol. 62, no. 2, pp. 522-531, Feb. 2015.
B. Sangeeta and L. Shaw, "A Real Time Analysis of PPG Signal for Measurement of SpO2 and Pulse Rate", International journal of computer applications, vol. 36, no. 11, pp. 45-50, 2011
D. Ban, and S. Kwon, "Movement Noise Cancellation in PPG Signals, " in Proc. 2016 IEEE International Conference on Consumer Electronics (ICCE), Las Vegas, U.S. state of Nevada, 2016, pp. 47-48.
C. C Wu, S. H. Fan, S. Chuang, J. J. Liao, C. C. Chou, and W. C. Fang, "A Wireless Photoplethysmography Signal Processing System for Long-Term Monitoring," in Proc. 2016 IEEE International Conference on Consumer Electronics (ICCE), Las Vegas, U.S. state of Nevada, 2016, pp. 480-483.
M. Kim, T. Kim, S. Jang, D. Ban, B. Min, and S. Kwon, "Noise-Robust Algorithm for PPG Signal Measurement," J. Korea Inform. Commun. Soc. (KICS), vol. 38, no. 12, pp. 1085-1094, Dec. 2013.
K. S. Lee, "Tracking Heart Rate Based on PPG," Master Thesis, Dept. of Computer Science, Yonsei University, 2009.
J. Allen, "Photoplethysmography and its application in clinical physiological measurement," Physiological Measurement, vol. 28, no. 3, pp. 1-39, Feb. 2007.
J. Hashimoto, D. Watabe, A. Kimura, H. Takahashi, T. Ohkubo, K. Totsune, and Y. Imai, "Determinants of the second derivative of the finger photoplethysmogram and brachial-ankle pulse-Wave velocity: the Ohasama study," Amer. J. Hypertension, vol. 18, no. 4, Part 1, pp. 477-485, Apr. 2005.
H. Lee, J. Lee, W. Jeong, J. Jun, and G. Lee, "Motion Artifacts reduction from the PPG based on the Improved PMAF for the U-Health care System," The Institute of Electronics Engineers of Korea-System and Control, vol. 45, no. 5, pp. 28-34, Sep. 2008.
H. W. Lee, J. W. Lee, W. G. Jung, J. Y. Jang, Y. I. Kim, and G. K. Lee, "Design of the Two Dimension Moving Average Filter to Remove the Motion Artifact of the PPG," in Proc. Conference of The Institute of Electronics Engineers of Korea, 2007, pp. 1019-1020.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.