최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국항행학회논문지 = Journal of advanced navigation technology, v.20 no.6 = no.81, 2016년, pp.556 - 561
윤영철 (가톨릭관동대학교 전자공학과) , 김영 (금오공과대학교 전자공학부)
This paper describes implementation of a 13.56 MHz, 5 kW RF high power generator for ISM band applications. This RF generator consists of four LDMOS modules of 1.25kW class-AB push-pull power amplifier with drive amplifier and its outputs are combined by using Wilkinson type transmission-line transf...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
13.35 MHz, 5 kW RF 제너레이터의 구성은 어떻게 되는가? | 35 MHz, 5 kW RF 제너레이터의 구현에 대한 내용이다. 이 제너레이터의 구성은 드라이브증폭기와 LDMOS 1.25 kW 트랜지스터를 클래스 AB 푸쉬풀 증폭기로 구현한 모듈을 바탕으로 4개의 모듈을 윌킨슨 형태의 전송선로 변환기를 이용하여 결합하는 구조를 갖고 있다. 이 제너레이터는 선형성보다는 높은 출력과 효율을 얻는 것이 중요하며, 트랜지스터에서 발생하는 열은 워터 쿨링에 의한 수냉식 방법을 선택하여 외부로 배출하였다. | |
ISM 대역이란 무엇인가? | 전파를 응용한 장비에는 정보전송을 목적으로 하는 통신 용 장비와 그 외의 비통신용 장비로 구분할 수 있으며, 비통 신용 전파 응용장비는 산업, 과학, 의료 등의 분야에서 널리 사용되고 있고, 이러한 분야에서 누구나 전파를 사용할 수 있도록 모든 나라에서 ISM (industry, science, and medical) 대 역을 정의해 놓고 있다[1-2]. | |
비통신용 RF 장비인 RF 제너레이터는 어디에 초점을 맞춰 설계하였는가? | 56 MHz의 5 kW RF 제너레이터를 설계, 제작한 내용이다. 비통신용 RF 장비인 RF 제너레이터는 통신용 증폭기에서 요구되는 선형성 보다는 고효율과 높은 안정성을 요구하기 때문에 이것에 초점을 맞춰 설계하였으며, 전력 증폭기의 열 전도성을 개선하기 위하여 고전력 LDMOS를 구리 방열판에 직접 납땜하여 고정시켰다. 이러한 방식은 전기적인 접지효 과를 개선시켜줌으로서 효율도 함께 좋아지는 효과를 얻을 수 있다. |
Y. S. Kim, In non-communication, state survey of RF application equipment and grouping system research, Korea Radio Promotion Association, KORPA Research 2007-08, 2008.
H. J. Lim and M. H. Lee, "In advanced noncommunication, state survey of RF application equipment and technology trend," Korea Communications Agency, Vol. 72, pp. 44-62, 2014.
G. Y. Yum, Plasma Etching Technology, 1-st ed. Goyang, Korea: Publishing YOUNG, 2012.
A. P. Sample, D. A. Meyer, and J. R. Smith, "Analysis, experimental results, and range adaptation of mangnetically coupled resonators for wireless power transfer," IEEE Transactions on Industrial Electronics, Vo1. 58, No. 2, pp. 544-554, Feb. 2011.
K. Banawan, and S. Ulukus, "MIMO wiretap channel under receiver-side power constraints with applications to wireless power transfer and cognitive radio," IEEE Transactions on Communications, Vol. 64, No. 9, pp. 3872-3885, Sep. 2016.
M. Khalilian, S. G. Rosu, V. Cirimele, P. Guglielmi, and R. Ruffo, "Load idenfication in dynamic wireless power transfer system utilizing current injection in the transmitting coil," in Wireless Power Transfer Conference (WPTC), Aveiro: Portugal, 2016.
F. Musavi and W. Eberle, "Overview of wireless power ransfer technologies for electric vehicle battery charging," IET Power Electronics, Vol. 7, No. 1, pp. 60-66, 2014.
M. A. Laughton and D. F. Warne, Electrical Engineer's Reference Book, 16-th ed. Burlington, MA: Elsevier Science, 2013.
K. Nelson, Q. Li, L. Li, and M. Shah, Solder reflow attach method for high RF power devices in air cavity devices, NXP Application Note 1908, 2011.
Y. Iwanami, Toroidal Coli Application, 5th ed. Tokyo, Japan: CQ Publishing Company, 2011.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.