최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기공업화학 = Applied chemistry for engineering, v.27 no.1, 2016년, pp.86 - 91
이정숙 (공주대학교 화학공학부) , 이창일 (공주대학교 화학공학부) , 고영수 (공주대학교 화학공학부)
Three amorphous silicas and SBA-15 were employed as supports, which were capable of confining ionic liquid (IL) and metallocene in the nanopore. Ionic liquid functionalized silica was prepared by the interaction between the chloride anions of 1,3-bis(cyanomethyl)imidazolium chloride and the surface ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
실리카는 표면의 -OH 그룹 농도는 메탈로센 촉매 분자 담지에 어떠한 영향을 미치는가? | 메탈로센촉매의 할로겐기나 알킬기가 실리카의 표면에 있는 -OH 그룹과 반응하여 담지 되는데, 하나의 -OH와 결합할 때 메탈로센 촉매가 활성점을 형성할 수 있다. -OH 그룹의 농도가 높을수록 많은 수의 메탈로센 촉매 분자를 담지할 수 있다. 하지만 -OH의 농도가 너무 높으면 메탈로센 촉매가 활성점을 형성할 수 없는 결합구조가 되어 오히려 촉매독으로 작용한다[6]. 따라서 적절한 온도에서 소성 과정을 통해 실리카 표면의 -OH 그룹의 농도를 조절해야 한다[7]. | |
메탈로센 촉매의 담체로 가장 널리 사용되는 촉매는 무엇인가? | 담지 메탈로센 촉매의 담체로 가장 널리 사용되는 실리카는 표면에 있는 -OH 그룹의 농도에 따라 담체로서의 특징이 달라진다. 메탈로센촉매의 할로겐기나 알킬기가 실리카의 표면에 있는 -OH 그룹과 반응하여 담지 되는데, 하나의 -OH와 결합할 때 메탈로센 촉매가 활성점을 형성할 수 있다. | |
메탈로센 촉매의 담체는 어떠한 특성을 지녀야 하는가? | 담체는 담지 메탈로센 촉매의 중합활성과 분자량 분포, 생성된 고분자의 입자형상 등과 같은 고분자의 물성에 큰 영향을 미친다. 메탈로센 촉매의 담체는 다공성이고 넓은 표면적을 가지고 있어야 하며 일반적으로 실리카나 알루미나 등이 사용된다. 이전의 연구에서는 폴리에틸렌 나노 섬유를 합성하기 위해 관형의 세공 구조를 갖는 메조포러스 알루미나를 담체로 사용하였으며[1] 이외에도 고분자, sulfonic acid를 작용기로 갖는 SBA-15 그리고 MgCl2 등을 담체로 사용한 연구 결과도 보고되었다[2-5]. |
J. P. J. Turunen, T. Venalainen, S. Suvanto, and T. T. Pakkanen, Novel Use of Mesoporous Aluminas as Supports for $Cp_2ZrCl_2$ and Cp*ZrMe3: Ethylene Polymerization and Formation of Polyethylene Nanofibers, J. Polym. Sci. A: Polym. Chem., 45, 4002-4012 (2007).
A. S. Shearer, Y. R. Miguel, E. A. Minich, D. Pochan, and C. Jenny, Polymer-Supported Metallocene Catalysts for Ethylene Polymerisation: Characterisation and Catalytic Studies, Inorg. Chem. Commun., 10, 262-264 (2007).
M. R. Ribeiro, A. Deffieux, and M. F. Portela, Supported Metallocene Complexes for Ethylene and Propylene Polymerizations: Preparation and Activity, Ind. Eng. Chem. Res., 36, 1224-1237 (1997).
J. C. Hicks, B. A. Mullis, and C. W. Jones, Sulfonic Acid Functionalized SBA-15 Silica as a Methylaluminoxane-Free Cocatalyst/Support for Ethylene Polymerization, J. Am. Chem. Soc., 129, 8426-8427 (2007).
R. Huang, R. Duchateau, C. E. Koning, and J. C. Chadwick, Zirconocene Immobilization and Activation on $MgCl_2$ -Based Supports: Factors Affecting Ethylene Polymerization Activity, Macromolecules, 41, 579-590 (2008).
J. H. Z. Santos, P. P. Greco, F. C. Stedile, and J. Dupont, Organosilicon-Modified Silicas as Support for Zirconocene Catalyst, J. Mol. Catal. A: Chem., 154, 103-113 (2000).
G. Fink, B. Steinmetz, J. Zechlin, C. Przybyla, and B. Tesche, Propene Polymerization with Silica-Supported Metallocene/MAO Catalysts, Chem, Rev., 100, 1377-1390 (2000).
J. S. Lee, J.-H. Yim, J.-K. Jeon, and Y. S. Ko, Polymerization of olefins with single-site catalyst anchored on amine-functionalized surface of SBA-15, Catal. Today, 185, 175-182 (2012).
J. S. Lee and Y. S. Ko, Immobilization Metallocene Inside Surface-functionalized Nanopore of Micelle-Templated Silica and its Ethylene Polymerization, Polymer(Korea), 36, 111-116 (2012).
J. S. Lee and Y. S. Ko, Control of the molecular structure of ethylene- 1-hexene copolymer by surface functionalization of SBA-15 with different compositions of amine groups, J. Mol. Catal AChem., 386, 120-125 (2014).
Y. Liua, L. Guoa, L. Zhua, X. Suna, and J. Chena, Removal of Cr(III, VI) by Quaternary Ammonium and Quaternary Phosphoniumionic Liquids Functionalized Silica Materials, Chem. Eng. J., 158, 108-114 (2010).
H.-L. Shim, S. Udayakumar, J.-I. Yu, I. Kim, and D.-W. Park, Synthesis of Cyclic Carbonate from Allyl Glycidyl Ether and Carbon Dioxide using Ionic Liquid-Functionalized Amorphous Silica, Catal. Today, 148, 350-354 (2009).
Q. Zhang, S. Zhang, and Y. Deng, Recent Advances in Ionic Liquid Catalysis, Green Chem., 13, 2619-2637 (2011).
J.-H. Yim, J. S. Lee, and Y. S. Ko, Metallocene Catalysts Supported on Aminosilane and Ionic Liquids Functionalized Silica and its Ethylene Polymerization, Polymer(Korea), 39, 169-173 (2014).
D. Zhao, Q. Huo, J. Feng, B. F. Chmelka, and G. D. Stucky, Nonionic Triblock and Star Diblock Copolymer and Oligomeric Surfactant Syntheses of Highly Ordered, Hydrothermally Stable, Mesoporous Silica Structures, J. Am. Chem. Soc., 120, 6024-6036 (1998).
M. H. Valkenberg, C. deCastro, and W. F. Holderich, Immobilisation of Ionic Liquids on Solid Supports, Green Chem., 4, 88-93 (2002).
A. Karout and A. C. Pierre, Silica Gelation Catalysis by Ionic Liquids, Catal. Commun., 10, 359-361 (2009).
A. Carrero, R. V. Grieken, I. Suarez, and B. Paredes, Ethylene Polymerization over $(nBuCp)_2ZrCl_2/MAO$ Catalytic System Supported on Aluminosilicate SBA-15 Mesostructured Materials, Polym. Eng. Sci., 48, 606-616 (2008).
P. Kumkaew, S. E. Wanke, P. Praserthdam, C. Danumah, and S. J. Kaliaguine, Gas-Phase Ethylene Polymerization Using Zirconocene Supported on Mesoporous Molecular Sieves, J. Appl. Poym. Sci., 87, 1161-1177 (2003).
M. Atiqullah, M. N. Akhtar, A. A. Moman, A. H. Abu-Raqabah, S. J. Palackal, H. A. Al-Muallem, and O. M. Hamed, Influence of Silica Calcination Temperature on the Performance of Supported Catalyst $SiO_2-^nBuSnCl_3/MAO/(^nBuCp)_2ZrCl_2$ Polymerizing Ethylene without Separately Feeding the MAO Cocatalyst, Appl. Catal. A-Gen., 320, 134-143 (2007).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.