최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국유체기계학회 논문집 = The KSFM journal of fluid machinery, v.19 no.6, 2016년, pp.26 - 33
임신영 (한국지역난방공사 중앙연구원) , 이종준 (한국지역난방공사 중앙연구원) , 전영신 (한국지역난방공사 중앙연구원) , 김형택 (아주대학교 에너지공학부)
Combined heat and power (CHP) system is one of the power generation system which can generate both electricity and heat. Generally, mid-size and big-size CHP plant in Korea generate electricity from gas turbine and steam turbine, then supply heat from exhaust gas. Actually, CHP can supply heat using...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
국내에서는 어떠한 열병합 발전시스템이 활용되고 있는가 | 열병합 발전시스템은 규모에 따라 소형(Small), 중형(Mid-size), 대형(Large)으로 구분할 수 있으며 전기출력 1MW 이하는 소형, 1~20 MW 범위는 중형, 그 이상은 대형으로 구분한다.(4) 우리나라는 소규모 보다는 신도시 및 대규모 택지개발 지구단위로 지역난방을 공급하고 있기 때문에 중대형급(1 MW 이상)의 열병합 발전설비가 주로 사용되는 실정이며, 대체로 가스ㆍ스팀터빈 복합화력발전 시스템 후단의 열을 활용하는 열병합 복합화력 시스템이 활용되고 있다. 열병합 복합화력 발전설비는 저압터빈 후단 혹은 전단에 온수열교환기를 설치하여 온수를 생산하고 있으며, 전자의 경우는 배압터빈으로, 후자의 경우에는 모드운전을 통하여 복수터빈과 배압 터빈을 상황에 맞게 사용하는 것이 일반적이다. | |
열병합발전시스템이란 무엇인가 | 열병합발전시스템은 열에너지를 이용하여 전력을 생산하고 남는 여열을 활용하여 다시 열을 생산하여 활용하는 발전 시스템을 의미한다. 전력과 열을 동시에 생산하는 시스템은 모두 열병합발전 시스템으로 총칭하지만, 대체로 국내에서 사용 중인 일정규모 이상의 열병합발전의 경우 기력 발전시스템 혹은 가스터빈과 스팀터빈 복합화력 발전소의 여열을 활용하여 지역난방 열을 생산한다. | |
열병합 발전 시스템은 기존의 기력발전 및 복합화력발전 시스템에 비해 어느정도 효율을 가지고 있는가 | 전력과 열을 동시에 생산하는 시스템은 모두 열병합발전 시스템으로 총칭하지만, 대체로 국내에서 사용 중인 일정규모 이상의 열병합발전의 경우 기력 발전시스템 혹은 가스터빈과 스팀터빈 복합화력 발전소의 여열을 활용하여 지역난방 열을 생산한다. 열병합 발전 시스템은 기존의 기력발전 및 복합화력발전 시스템 대비 매우 높은 약 75~85%에 달하는 시스템 효율을 가지는 것으로 알려져 있다.(1,2) 최근 세계적인 에너지 사용량이 증가하고 있고 이에 따라 탄소배출량의 증가폭이 큰 폭으로 상승(3)하고 있는 상황을 해결하기 위하여 2015년 11월 파리에서 개최된 유엔 기후변화회의에서는 각 국의 탄소배출량을 제한하기로 결정하였으며, 이에 따라 유럽 및 미국을 중심으로 기후변화에 대응하기 위한 방안의 하나로써 열병합 시스템의 확대보급이 검토되고 있다. |
Yan, J. Y., 2015, Handbook of Clean Energy System-volume VI, John Wiley & Sons Ltd, Chichester, U.K.
Darrow, K., Tidball, R., Wang, J., and Hampson, A., 2014, "Catalog of CHP Technologies," U.S. Environmental protection Agency CHP Partnership
Conti, J., Holtberg, P., Napolitano, S., Schaal, M., and Doman, L. E., 2014, "International Energy Outlook 2014," U.S. Energy Information Administration.
U.S. Department of Energy, 2009, "A decade of progress Combined Heat and Power," U.S. Department of Energy
Euroheat & power, 2015, "District heating and cooling country by country 2015 survey," Euroheat & power.
Giaccone, L. and Canova, A. 2009, "Economical comparison of CHP systems for industrial user with large steam demand," Applied Energy, vol. 86, No. 6, pp. 904-914.
Graus, W. and Worrell, E., 2011, "Methods for calculating CO2 intensity of power generation and consumption_A global perspective," Energy Policy, Vol. 39, No. 9, pp. 613-627.
Olsson, L., Wetterlund, E., and Soderstrom, M., 2015, "Assessing the climate impact of district heating systems with combined heat and power production and industrial excess heat," Resources, Conservation and Recycling, Vol. 96, pp. 31-39.
Li, H., Marechal, F., and Favrat, D., 2010, "Power and cogeneration technology environomic performance typification in the context of $CO_2$ abatement part II_Combined heat and power cogeneration," Energy, Vol 35, No. 9, pp. 3517-3523.
Klaassen, R. E. and Patel, M. K., 2013, "District heating in the Netherlands today: A techno-economic assessment for NGCC-CHP," Energy, Vol 54, pp. 63-73.
Marbe, A., Harvey, S., and Berntsson, T., 2006, "Technical, environmental and economic analysis of co-firing of gasified biofuel in a natural gas combined cycle (NGCC) combined heat and power (CHP) plant," Energy, Vol. 31, No. 10, pp. 1614-1631.
Wang, H., Yin, W., Abdollahi, E., Lahdelma, R., and Jiao, W., 2015, "Modelling and optimization of CHP based district heating system with renewable energy production and energy storage," Applied Energy, Vol. 159, pp. 401-421.
Seijo, S., del Campo, I., Echanobe, J., and Garcia-Sedano, J., 2016, "Modeling and multi-objective optimization of a complex CHP process," Applied Energy, Vol. 161, pp. 309-319.
Mobley, R. K., 2001, Plant Engineer's Handbook, Butterworth Heinemann, Boston, U.S.A.
Han, P., 2010, MS7001EA(PG7121) Gas Turbine Generator Thermal Performance Test Procedure Lotte, Pangyo, Korea, Ver.7.08, GE Energy.
Kim, K. M., Park, H. J., and Park, H. B., 2010, "Pangyo Combined heat & power plant heat & mass balance diagram," Rev.03, Lotte Eng, & construction Co., Ltd.
GE Energy, GateCycleTM, Ver. 6.1.2;2013.
Brooks, F. J., 2000, "GE Gas Turbine Performance Characteristics," GE Power System, Schenectady, NY.
Aurel Stodola, 1927, "Steam and Gas Turbines," McGraw-Hill, New York
Cooke, D. H., 1985, "On Prediction of Off-Design Multistage Turbine Pressures by Stodola's Ellipse," Journal of Eng. Gas Turbines Power Vol. 107, Issue 3, pp. 596-606.
Spencer, R. C., Cotton, K. C., and Cannon, C. N., 1963, "A Method for Predicting the Performance of Steam Turbine-Generators: 16,500 kW and Larger," Journal of Engineering for Power, Vol. 85, pp. 249-298.
Ganjehkaviri, A., Jaafar, M. M., and Hosseini, S. E., 2015, "Optimization and the Effect of Steam Turbine Outlet Quality on the Output Power of a Combined Cycle Power Plant," Energy Conversion and Management, Vol. 89, pp. 231-243.
Robin A. Chaplin, 2009, Thermal Power Plant-Volume III, Eoloss Publishers, Oxford, U.K.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.