최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기資源리싸이클링 = Journal of the Korean Institute of Resources Recycling, v.25 no.1, 2016년, pp.40 - 47
서주범 (한국지질자원연구원 광물자원연구본부) , 김기석 (한국지질자원연구원 광물자원연구본부) , 배인국 (한국지질자원연구원 광물자원연구본부) , 이재영 (포항산업과학기술연구원 POSNEP연구단) , 김형석 (한국지질자원연구원 광물자원연구본부)
Nickel laterite ore is classified into two principal ore types: saprolite (silicate ore) and limonite (oxide ore). Saprolite-type ore characterized by high magnesia and silica contents is treated by pyrometallurgy process. On the other hand, limonite-type ore is subjected to hydrometallurgy process ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
니켈 라테라이트광은 왜 노천개발이 쉬운가? | 5%이다. 6,7) 니켈 라테라이트광은 품위가 균일하고 굳어지지 않은 상태이며 지표 가까이 부존되어 노천개발이 쉬운 장점을 가지고 있다. 세계에서 가장 큰 가니어라이트 광상은 뉴칼레도니아에서 발견되는데 19,000 km2인 섬의 30% 정도를 차지하고 있으며 평균심도는 20 m이다. | |
왜 습식제련 원료로 사용하려는 니켈 리모나이트광은 Si, Mg, Fe의 함량이 기준치를 만족해야 하는가? | 5% 이하의 리모나이트광은 건식제련 원료로 사용될 경우 경제성을 확보할 수 없어 습식제련으로 페로니켈을 생산하는 용도로 활용되고 있다. 습식제련 원료인 리모나이트광에 사프로라이트광이 혼입되면 사프로라이트광과 무기산이 반응하여 무기산 소모량을 증가시킬 뿐만 아니라 불순물인 실리카 성분에 의해 최종 슬러지 발생량이 증가하여 공정비용을 증가시키는 단점이 발생한다.9) 이러한 이유로 니켈 리모나이트광은 Si + Mg함량 10% 이하, Fe 함량 40% 이상이어야 습식제련 원료로 사용하기 적합하다. | |
니켈황화광이 니켈 생산량의 절반 이상을 차지하는 원료로 사용된 이유는? | 1) 니켈광은 크게 황화광(nickel sulfide ore)과 산화광인 라테라이트광(nickeliferous laterite ore)으로 구분된다. 니켈황화광은 다단계분쇄(stage-grinding), 비중 선별(gravity separation) 및 부유선별(flotation) 등 선광 공정으로 쉽게 니켈 품위를 향상시킬 수 있어,2) 2011년 전세계 니켈생산량의 60%를 생산하는 원료로 사용되었다.3) 하지만 오랜 자원개발로 인해 경제적으로 채굴 가능한 니켈황화광은 고갈되고 있으며,4) 이로 인해 니켈 전체 매장량의 70% 이상을 차지하는 니켈 라테라이트광에 대한 관심이 최근 증가하고 있다. |
Kim Wantae, Kim Sangbae, 2009 : Current status of laterite ore processing technology, The mineralogical society of Korea, Minerals and Industry ISSN: 1299-7496, 22(2), pp.71-83.
Lu, J., Liu, S., Shangguan J., Du. W., Pan, F., and Yang, S. 2013 : The effect of sodium sulphate on the hydrogen reduction process of nickel laterite ore, Miner. Eng., 49, pp.154-164.
Harris, C.T., Peacey, J.G., and Pickles, C.A., 2011 : Selective sulphidation of a nickelferous lateritic ore, Miner. Eng., 24, pp.651-660.
Zhu, D.Q., Cui, Y., Vining, K., Hapugoda, S., Douglas, J. Pan, J., and Zheng, G. L., 2012, Upgrading low nickel content laterite ores using selective reduction followed by magnetic separation, Int. J. Miner. Process, 106-109, pp.1-7.
Norgate, T., and Jahanshahi, S., 2011 : Assessing the energy and greenhourse gas foortprints of nickel laterite processing, Miner. Eng., 23, pp.698-707.
Wells, M.A., Ramanaidou, E.R., Verrall, M., and Tessarolo, C., 2009 : Mineralogy and crystal chemistry of "garnierites" in the Goro lateritic nickel deposit, New Caledonia, Eur. J. Mineral., 21, pp.467-483,
Tauler, E., Proenza, J.A., Gali, S., Lewis J.F., Labrador, M., Garcia-Romero, E., Suarez, M., Longo, F., and Bloise, D.G., 2009 : Ni-sepiolite-falcondoite in garnierite mineralization from the Falcono Ni-laterite deposit, Dominican Republic, Clay Minerals, 44, pp.435-454.
Mudd, G., 2010 : Global trends and issues in nickel mining: sulfides versus laterites, Ore Geol. Rev., 38, pp9-26,
Eckleman, M., 2010 : Facility-level energy and greenhouse gas life-cycle assessment of the global nickel industry, Resour. Conserv. Recycl., 54, pp.256-266.
Kim, K., Seo, J., Bae, I., Bae, K., You, K., Lee, J., and Kim, H., 2014 : A Study on separation of limonite and saprolite from nickel laterite ores, J. of Korean Inst. of Resources Recycling, 23(6), pp.12-21.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.