$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

Narrow Gap 맞대기 TIG 용접에서 생산성 향상을 위한 연구
A Study on Productivity Improvement in Narrow Gap TIG Welding 원문보기

Journal of welding and joining = 대한용접·접합학회지, v.34 no.1, 2016년, pp.68 - 74  

전재호 (부경대학교 신소재시스템공학과 대학원) ,  김성률 (부경대학교 신소재시스템공학과 대학원) ,  조상명 (부경대학교 신소재시스템공학과)

Abstract AI-Helper 아이콘AI-Helper

Adoption of narrow gap welding shall be increased for the butt joint of thick plate, because the deformation and welding cost is reduced by decrease of cross-sectional area. However, sometimes narrow gap causes defects such as lack of fusion since it has small groove angle and narrow groove width. T...

주제어

AI 본문요약
AI-Helper 아이콘 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

문제 정의

  • 본 연구는 C형 스트립을 사용하는 Super-TIG 용접을 narrow gap 맞대기 용접에 적용하여 대전류, 고용 착속도에서 언더컷, 험핑비드 및 기타 용접 결함이 없는 공정을 개발하고자 한다. 개발된 공정의 평가를 위해 그루브 면으로부터 fusion line까지의 거리인 melting depth의 평균과 표준편차를 측정하였다.
본문요약 정보가 도움이 되었나요?

질의응답

핵심어 질문 논문에서 추출한 답변
narrow gap의 장점은? 후판 맞대기 용접 시 기존 GMAW, GTAW, SAW 등에서 용착단면적 감소를 통해 용접비용 감소, 변형량 감소의 장점을 가지는 narrow gap의 적용이 늘고 있다1-6).
Lack of Fusion을 방지하기위해 기존 용접에서 어떤 것이 개발되었는가? 그러나 narrow gap 맞대기용접의 작은 그루브 각으로 인해서 그루브 벽면 쪽 용입이 부족한 Lack of Fusion(LF) 결함이 빈번하게 발생한다. 이러한 LF를 방지하기 위해 기존의 GMAW, GTAW 등의 용접에서는 아크가 그루브 벽면 쪽으로 쉽게 도달할 수 있는 기술들을 개발되었다1-3,5-9).
narrow gap의 단점은? 그러나 narrow gap 맞대기용접의 작은 그루브 각으로 인해서 그루브 벽면 쪽 용입이 부족한 Lack of Fusion(LF) 결함이 빈번하게 발생한다. 이러한 LF를 방지하기 위해 기존의 GMAW, GTAW 등의 용접에서는 아크가 그루브 벽면 쪽으로 쉽게 도달할 수 있는 기술들을 개발되었다1-3,5-9).
질의응답 정보가 도움이 되었나요?

참고문헌 (14)

  1. Cicero M.D. Starling, Paulo V. Marques, Paulo J. Modenesi, Statistical modeling of narrow-gap GTA welding with magnetic arc oscillation. Journal of Materials Processing Technology, 51 (1995), 37-49 

  2. Aravinda Pai, Irappa Sogalad, S.K. Albert, Prabhat Kumar, T.K. Mitra, S.Basavarajappa, Comparison of Microstructure and Properties of Modified 9Cr-1Mo Welds Produced by Narrow Gap Hot Wire and Cold Wire Gas Tungsten Arc Welding Processes, Procedia Materials Science, 5 (2014), 1482-1491 

  3. D.N.Shim, I.C.Jung, The Characteristic Investigation on Narrow-gap TIG Weld Joint of Heavy wall Austenitic Stainless Steel Pipe, Proceedings of KSME, 3 (2003), 670-677(in Korean) 

  4. J.T. McGRATH, R.S. CHANDEL, R.F. ORR, J.A. GIANETTO, Microstructure/Mechanical Property Relationship in Thick-Section C-Mn Narrow-Groove Welds, WELDING RESEARCH SUPPLEMENT, (Sep, 1988) 

  5. T. Nakamura, K. Hiraoka, Ultranarrow GMAW process with newly developed wire melting control system, Science and Technology of Welding and Joining, 6 (6) (2001) 

  6. SUMI Hiroyuki, KATAOKA Tokihiko, KITANI Yasushi, Application of Narrow Gap Welding Process with " $J-STAR^{TM}$ Welding" to Shipbuilding and Construction, JFE TECHNICAL REPORT, 20 (Mar., 2015) 

  7. J.S. Jang, B.W. Lee, Application of GMAW Narrow Gap Welding, Journal of KWS, 2(1), (1984), 58-65(in Korean) 

  8. M. Ramakrishnan, K. Padmanaban, V. Muthupandi, Studies on fracture toughness of cold wire addition in narrow groove submerged arc welding process, Int J Adv Manuf Technol, 68 (2013), 293-316 

  9. IWATA Shinji, MURAYAMA Masatoshi, KOJIMA Yuji, Application of Narrow Gap Welding Process with High Speed Rotating Arc to Box Column Joints of Heavy Thick Plates, JFE TECHNICAL REPORT, 14 (Dec., 2009) 

  10. Inoslav Rak, Arpad Treiber, Fracture behaviour of welded joints fabricated in HSLA steels of different strength level, Engineering Fracture Mechanics, 64 (1999), 401-415 

  11. Aravinda Pai, Irappa Sogalad, S.K. Albert, Prabhat Kumar, T.K. Mitra, S.Basavarajappa, Comparison of Microstructure and Properties of Modified 9Cr-1Mo Welds Produced by Narrow Gap Hot Wire and Cold Wire Gas Tungsten Arc Welding Processes, Procedia Materials Science 5 (2014), 1482-1491 

  12. G.L.F. POWELL, G. HERFURTH, Charpy V-Notch Properties and Microstructures of Narrow Gap Ferritic Welds of a Quenched and Tempered Steel Plate, METALLURGICAL AND MATERIALS TRANSACTION A, 29A (Nov., 1998), 2775 

  13. Dong-Soo Oh, Yeong-Sik Kim, and Sang-Myung Cho, Derivation of Current Density Distribution by Arc Pressure Measurement in TIG Welding, Science and Technology of Welding and Joining, 10 (4) (2005), 442-446 

  14. Choe, Jun-Tae, Park, Jong-Ryeon, Kim Dae-Sun, Study on Narrow groove TIG welding using Ar-He of shielding gas & hot wire, Proceedings of KWS, 44 (2005), 346-348 (in Korean) 

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

GOLD

오픈액세스 학술지에 출판된 논문

이 논문과 함께 이용한 콘텐츠

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로