최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기전기학회논문지. The Transactions of the Korean Institute of Electrical Engineers. P, v.65 no.1, 2016년, pp.57 - 65
윤신용 (Institute of Technology Research, Digital Graphics Incorporation)
This paper was analyzed the characteristics of piezoelectric inkjet print head using finite element method(FEM). It showed the bending node driving of piezoelectric and relation theory principle consider piezoelectric material characteristics and ink characteristics. From such result we were had the...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
산업용 잉크젯 프린터 구성은? | 잉크젯 프린팅 기술은 잉크 부피가 수십 피코리터(1pℓ piko 10-12) 이하의 미소 액적을 전기 또는 전계로부터 나오는 응력(힘)의해 초당 대략 수만 번 이상의 빈도로 인쇄대상 소재에 분사하여 직접 무늬와 미세 전기패턴을 프린팅하는 기술을 말한다. 그리고 산업용 잉크젯 프린터 구성은 잉크를 토출하는 헤드, 헤드의 분사제어를 위한 전자회로 및 소프트웨어, 칼라별 멀티헤드를 인쇄면적에서 인쇄하기 위한 헤드 이송 서보모터 제어부, 헤드 인쇄면에 소재를 일정간격으로 공급(feeding)하는 서보모터 제어부, 잉크젯 헤드에 잉크를 공급하는 잉크리필 공압라인의 보조잉크통 및 메인 잉크공급부, UI화면 통합제어부 등의 요소기술이 필요하다[7]. | |
압전 잉크젯 프린트헤드의 전압 펄스제어에 의한 에칭 레지스터잉크 망점 선폭 50um 이하의 PCB 전기회로 미세패턴 제조결과를 얻을 수 있었는데 이를 통해 기대되는 점은? | 실험결과를 통하여 압전 잉크젯 프린트헤드의 전압펄스제어에 의한 에칭 레지스터잉크 망점 선폭 50um 이하의 PCB 전기회로 미세패턴 제조결과를 얻을 수 있었다. 따라서 앞으로 산업용 잉크젯 압전헤드에 의한 간소화된 에칭잉크 프린팅 공정기술은 에칭 PCB 미세 전기회로패턴, 명판글자, 고급 인테리어 동판 및 알루 미늄 판의 이미지패턴 등에 유용하게 사용될 수 있을 것으로 기대된다. | |
잉크젯 프린팅 기술이란? | 잉크젯 프린팅 기술은 잉크 부피가 수십 피코리터(1pℓ piko 10-12) 이하의 미소 액적을 전기 또는 전계로부터 나오는 응력(힘)의해 초당 대략 수만 번 이상의 빈도로 인쇄대상 소재에 분사하여 직접 무늬와 미세 전기패턴을 프린팅하는 기술을 말한다. 그리고 산업용 잉크젯 프린터 구성은 잉크를 토출하는 헤드, 헤드의 분사제어를 위한 전자회로 및 소프트웨어, 칼라별 멀티헤드를 인쇄면적에서 인쇄하기 위한 헤드 이송 서보모터 제어부, 헤드 인쇄면에 소재를 일정간격으로 공급(feeding)하는 서보모터 제어부, 잉크젯 헤드에 잉크를 공급하는 잉크리필 공압라인의 보조잉크통 및 메인 잉크공급부, UI화면 통합제어부 등의 요소기술이 필요하다[7]. |
"Printed Electronics in Live," Korea Printed Electronics Association, January. 2012
"Printed Electronics in Live," Korea Printed Electronics Association, December. 2013
J. M. Catchmark, "Molecular ruler lithography using sacrificial host structures fabricated using electron beam lithography," Journal of Micro/Nano lithography, MEMS, and MOEMS, Vol.5. No.4, November, 2006
J. G. Ganjei, D. Sawoska and A. Krol, "Digital Inkjet Printing for Etching Circuits," USA, Macdermid, 2007
T. W. Shield, D. B. Bogy, F. E. Talke, "Drop formation by DOD Ink-jet nozzles : A comparison of experiment and numerical simulation," pp.96-110, 1986
J. Miettinen, V. Pekkanen, K. Kaija, P. Manasikkamaki, J. Mantysalo, M. Mantysalo, J.Niittynen, etc, "Inkjet Printed System in package Design and Manufacturing," Microelectonics J., 39 1740-50, 2008
A. Berchtold, L. F. Feingeratebau and Getriebdlehe, "Simulation of A Drop On Demand Print Head with Planar Piezoelectric Transducer," Conference of IEEE pp.52-55, 1989
S. J. Park, W. C. Sim, Y. S. Yoo, and J. W. Joung, "Analysis of the micro droplet ejecting performance for industrial inkjet printing head," Proceeding of the 1st IEE international, Conference on Micro/Nano Engineered and Molecular systems, January 18-21, pp.1462-1465, Zhuhai, China. 2006
S. Y. Yoon, S. H. Baek, Y. Kim, etc, "Droplet Characteristics Analysis for Piezoelectric Head of Industrial Inkjet Print System," The Korean Institute of Electrical Engineers, Summer conference thesis, pp.961-964, July, 2007
D. Y. Shin, "Analysis of Inkjet Print Head," Manchester Materials Science Centre, UMIST, August. 2003
S. J. Shin, etc, "Development of MEMS based Piezoelectric Inkjet Print Head and Its Applications," The Korean Institute of Material, Spring conference thesis, May. 2010
Luca Dalessandro, Daniele Rosato, "Finite Element Analysis of the Frequency Response of a Metallic Cantilever Coupled with a piezoelectric Transducer," IEEE Transactions on Instrumentation and Measurement, Vol.54, No.5, pp.1881-1889, October. 2005
B. L. Lee, S. I. Kim, "Piezo-driven Inkjet Print head monitoring system," Journal of Korean Sensors Society, Vol.19, No.2, pp.124-129, 2010
K. S. Kwon, J. h. Myung, T. J. Um, Y. C. Joo and S. W. Lee, Relationship between Ink Jetting Speed and Inkjet Input Waveform Parameters," Journal of the Korean Society for Engineering, Vol.26, No.9, pp.143-147, September. 2009
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.