최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기비파괴검사학회지 = Journal of the Korean Society for Nondestructive Testing, v.36 no.6, 2016년, pp.490 - 495
Pulsed eddy current (PEC) testing signals have typically been obtained from the electromotive force induced in a sensor coil. However, an increasing number of studies have elected to incorporate the Hall plate as a sensor. Thus, accurate numerical modeling of the Hall sensor signal is necessary. In ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
펄스와전류탐상에서 탐상 신호는 어떻게 사용되어지는가? | 펄스와전류탐상에서 탐상 신호는 주로 센서코일에 유도되는 기전력의 시간에 따른 변화를 측정하여 사용되었는데, 최근에는 홀센서(Hall sensor)로 측정한 신호를 사용하는 경우도 많아지고 있다. 본 논문에서는 펄스와전류탐상에서 나타나는 홀센서 신호를 수치적으로 모델링하여 예측하였다. | |
펄스전류는 어떻게 나타낼 수 있는가? | 펄스전류는 여러 개의 주파수를 가진 정현파 전류의 합으로 나타낼 수 있는데, 이러한 여러 주파수 성분 때문에 펄스와전류(PEC) 탐상은 일반 와전류탐상에 비해 넓은 주파수 대역폭을 가지며, 따라서 일반 와전류탐상보다 피검사체에 대한 정보가 풍부하고, 침투 깊이도 더 깊을 것으로 기대되고 있다[1-3]. 펄스와전류탐상에서 탐상 신호는 주로 센서코일에 유도되는 기전력의 시간에 따른 변화를 측정하여 사용되는데, 최근에는 홀센서(hall sensor)로 측정된 신호를 사용하는 경우도 많아지고 있다. | |
최근 탐상 신호를 홀센서로 측정된 신호를 사용하는 경우가 많아지는 이유는 무엇인가? | 펄스와전류탐상에서 탐상 신호는 주로 센서코일에 유도되는 기전력의 시간에 따른 변화를 측정하여 사용되는데, 최근에는 홀센서(hall sensor)로 측정된 신호를 사용하는 경우도 많아지고 있다. 이는 코일을 사용하는 측정 방법에 비해 홀센서를 사용하는 측정 방법이 저주파에서도 민감도가 떨어지지 않는다는 홀소자의 특징을 활용하기 위함이라고 판단된다[4,5]. |
J. Blitz, "Electrical and Magnetic Methods of Nondestructive Testing," Bristol: Adam Hilger (1991)
C. J. Renken, "The use of a personal computer to extract information from pulsed eddy current," Materials Evaluation, Vol. 59, No. 3, pp. 356-360 (2001)
A. Sophian, G. Y. Tian, D. Taylor and J. Rudlin, "A feature extraction technique based on the principal component analysis for pulsed eddy current NDT," NDT&E International, Vol. 36, No. 1, pp. 37-41 (2003)
R. A. Smith and G. R. Hugo, "Transient eddy current NDE for aging aircraft capabilities and limitations," Insight, Vol. 43, No. 1, pp. 14-25 (2001)
C. S. Angani, D. G. Park, G. D. Kim, C. G. Kim and Y. M. Cheong, "Differential pulsed eddy current sensor for the detection of wall thinning in an insulated stainless steel pipe," Journal of Applied Physics, Vol. 107, 09E720 (2010)
D. S. Burnett, "Finite Element Analysis from Concepts to Application," Reading: Addison- Wesley (1988)
Y. K. Shin and D. M. Choi, "Design of a shielded reflection type pulsed eddy current probe for the evaluation of thickness," Journal of the Korean Society for Nondestructive Testing, Vol. 27, No. 5, pp. 398-408 (2007)
M. N. O. Sadiku, "Elements of Electromagnetic," Oxford: Oxford University Press (2001)
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.