최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국토목섬유학회 논문집 = Journal of the Korean Geosynthetics Society, v.15 no.1, 2016년, pp.47 - 57
윤대호 (Department of Ocean engineering, Pukyong National University) , (Department of Ocean engineering, Pukyong National University) , 김재홍 (Infrastructure research center, Korea Water Resources Corporation) , 김윤태 (Department of Ocean engineering, Pukyong National University)
Many researchers reported that artesian pressure exists in thick soft ground of Busan Nakdong river estuary. Artesian pressure in soft ground could affect rate of consolidation, settlement and drainage capasity of prefabricated vertical drain(PVD). This paper investigated consolidation behaviors of ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
연약지반에 작용하는 피압은 무엇에 영향을 줄 수 있는가? | 부산 낙동강 하구 대심도 연약지반 아래에 피압대수층이 존재한다는 것이 많은 연구자들에 의해 관측되었다. 연약지반에 작용하는 피압은 압밀 속도, 압밀 침하량, 연직배수재의 성능 등에 영향을 줄 수 있다. 따라서 본 연구에서는 피압의 작용 유 무에 따른 연직배수재가 부분 관입된 점토지반의 압밀 거동을 분석하였다. | |
대심도 연약지반에서 건설 시공시 지반조사와 더불어 지반개량이 필수적인 이유는 무엇인가? | 일반적으로 강어귀, 해안, 삼각주 및 델타지역 등의 경우 표층 아래 점토층이 주를 이루는 연약지반인 경우가 많아 건설 시공시 연약지반의 개량이 필수적이다. 특히 부산 낙동강 하구 지역은 우리나라의 대표적인 대심도 연약지반으로서 건설 시공시 지반조사와 더불어 지반개량이 필수적인 지역이다. | |
피압대수층은 무엇인가? | , 2006). 피압대수층이란 대심도 연약지반 아래 모래 혹은 자갈 대수층이 점토층과 같은 불투수층 또는 투수계수가 지극히 낮은 상부지반의 영향으로 수압의 유출 없이 압력을 지속적으로 받고 있는 피압이 존재하는 대수층을 말한다. Table 1은 선행연구를 통해 부산 낙동강 하구 부근의 피압 수두 관측 결과를 나타낸 것이다. |
Baek, S.H. (2002), Characterisation and Geotechnical Properties of Pusan Clays by Insitu Tests, Dong-a University, Doctor's thesis, pp.1-249 (In Korean).
Choi, Y.I. (2000), Consolidation Behavior of Clay Soils with Artesian Pressure, Dong-a University, Master's thesis, pp. 3-61 (In Korean).
Chung, S.G. and P.H. Giao. (2001), Examination of Pusan clays at a reference testing site, Lowland technology international, International Association of Lowland Technology (IALT), Vol. 3, No.2, pp.1-14.
Chung, S.G., Lee, N.K., Lee, J.M., Min, S.C., Hong, Y.P. (2010), Hydraulic Characteristics of Busan Clay in the Floodplain of the Nakdong River Delta, Journal of Korean Geotechnical Society, Vol.26, No.11, pp.47-61 (In Korean).
Chung, S.G., P.H. Giao, T.S. Nagaraj, and J.M. Kwag (2002), Characterization of estuarine marine clays for coastal reclamation in Pusan, Korea., Marine Georesources and Geotechnology, Vol.20, No.4, pp.237-254.
Han, Y.C., Yu, G.Y. (1999), A Study of Artesian Characteristics in Yangsan/Mulgeum Site, KGS Fall '99 National Conference, pp.123-130.
Heo, D.Y. (2003), A Study on the Depositional Environment and Geotechnical Properties of Clay Deposited at the Busan New Port Site, Dong-a University, Doctor's thesis, pp.8-195.
Jang, Y.S., Kim, Y.W. (2000), A Study of Installation Depth of Vertical Drain for weak Clay Soils with Artesian Pressure using 3-D Numerical Flow Model, Journal of Korean Society of Civil Engineers, Vol.20, No.1-C, pp.39-46 (In Korean).
Kim, H.T., Cho, J.H., Yoo, J.Y., Ro, J.K., Kim, S.W. (2002), Self-weight Consolidation Settlement of Soft-grounds on the Artesian Pressure After the Penetration of Vertical Drain, KGS Fall '02 National Conference, pp.597-604 (In Korean).
Kim, S.K., Kim, H.I., Hong, B.M., Kim, H.T. (1999), Consolidation Analysis of Vertical Drain Considering Artesian Pressure, KGS conference '99, pp.62-69 (In Korean).
Kim, T.H., Yu, J.M., Lee, M.J., Bae, K.H., Jung, D.S. (2006), A Design Case Study Considering the Artesian Pressure in Hwa Jeon Site of Nakdong Delta Area, Korean Association of Professional Engineers Soil Mechanics & Foundation Engineering, pp.311-319 (In Korean).
Kim, Y.T., Do Thank Hai. (2010), Effect of Leaching on the Compressibility of Busan Clay, Journal of Civil Engineering, Vol.14, No.4, pp.291-297.
Kim, Y.T., T.H. Do. (2011), Experimental Evaluation of Leaching Effects on the Compressibility of Marine Clay and its Strain Rate Dependency, Marine Georesources and geotechnology, Vol.29, No.1, pp.16-29.
Korea water resources corporation. (2015), Subsoil investigation report of Busan Eco-Delta City - phase 1 & area 3, pp. 1-468 (in Korean).
※ AI-Helper는 부적절한 답변을 할 수 있습니다.