최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국섬유공학회지 = Textile science and engineering, v.53 no.2, 2016년, pp.103 - 108
이현재 (충남대학교 유기소재.섬유시스템공학과) , 원종성 (충남대학교 유기소재.섬유시스템공학과) , 임성찬 (충남대학교 유기소재.섬유시스템공학과) , 이태상 (코오롱인더스트리 주식회사) , 윤준영 (코오롱인더스트리 주식회사) , 이승구 (충남대학교 유기소재.섬유시스템공학과)
In this study, PAN (polyacrylonitrile)-based carbon fiber was prepared under different carbonization conditions. Carbonization of oxi-PAN fiber was performed under four different temperature conditions. Changes in the characteristics of these carbon fibers prepared under each condition were studied ...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
탄소섬유는 무엇인가? | 탄소섬유는 탄소함량이 중량비 90% 이상인 섬유상의 탄소 재료이다. 탄소섬유의 강도는 강철의 10배 수준이며, 강철 대비 25%, 알루미늄 대비 70% 수준의 중량을 가진 경량 소재이다[1,2]. | |
원료에 의해 탄소섬유를 분류하면 어떤 종류로 나눠지는가? | 탄소섬유는 탄화 온도에 의한 분류, 원료에 의한 분류, 관용적 분류 등 다양한 기준으로 분류된다. 그 중 원료에 의한 분류는 탄소섬유의 제조를 위해 사용된 전구체를 기준으로 분류되며 rayon계 탄소섬유, pitch계 탄소섬유, polyacrylonitrile(PAN)계 탄소섬유로 분류된다. | |
탄소섬유의 장점과 그로 인해 활용되는 분야에는 어떤 것들이 있는가? | 탄소섬유의 강도는 강철의 10배 수준이며, 강철 대비 25%, 알루미늄 대비 70% 수준의 중량을 가진 경량 소재이다[1,2]. 경량성, 기계적 특성 외에도 높은 열 전도성, 낮은 열팽창 계수, 뛰어난 전기 전도성 및 내열성 등의 특성 또한 지니므로 항공기의 브레이크, 단열재, 우주왕복선, 원자로의 내열재, 로켓 노즐 내열재 등 다양한 산업 분야에서 응용되고 있다[3−5]. |
O. P. Bahl and L. M. Manocha, “Characterization of Oxidized PAN Fibers”, Carbon, 1974, 12, 417-423.
A. D. Cato and D. D. Edie, “Flow Behavior of Mesophase Pitch”, Carbon, 2003, 41, 1411-1417.
L. L. Hong, A. Moshonov, and J. D. Muzzy, "Electrochemical Polymerization of Xylene Derivatives on Carbon Fiber", Polym. Compos., 1991, 12, 191-195.
L. T. Drzal and M. Madhukar, "Fibre-matrix Adhesion and Its Relationship to Composite Mechanical Properties", J. Mater. Sci., 1993, 28, 569-610.
M. S. Dresselhaus and G. Dresselhaus, "Intercalation Compounds of Graphite", Adv. Phys., 1981, 30, 139-326.
S. Chand, "Review Carbon Fibers for Composites", J. Mater. Sci., 2000, 35, 1303-1313.
Z. Wangxi, L. Jie, and W. Gang, “Evolution of Structure and Properties of PAN Precursors during Their Conversion to Carbon Fibers”, Carbon, 2013, 41, 2805-2812.
E. Fitzer, W. Frohs, and M. Heine, “Optimization of Stabilization and Carbonization Treatment of PAN Fibers and Structural Characterization of the Resulting Carbon Fibers”, Carbon, 1986, 24, 387-395.
H. G. Chae, M. L. Minus, A. Rasheed, and S. Kumar, “Stabilization and Carbonization of Gel Spun Polyacrylonitrile/Single Wall Carbon Nanotube Composite Fibers”, Polymer, 2007, 48, 3781-3789.
E. Fizter and D. J. Muller, “The Influence of Oxygen on the Chemical Reactions during Stabilization of Pan as Carbon Fiber Precursor”, Carbon, 1975, 13, 63-69.
S. Lee, J. Kim, B. C. Ku, J. Kim, and H. I. Joh, "Structural Evolution of Polyacrylonitrile Fibers in Stabilization and Carbonization", Adv. Chem. Eng. Sci., 2012, 2, 275-282.
N. Yusof and A. F. Ismail, "Post Spinning and Pyrolysis Processes of Polyacrylonitrile (PAN)-based Carbon Fiber and Activated Carbon Fiber: A Review", J. Anal. Appl. Pyrol., 2012, 93, 1-13.
M. Wu, Q. Wang. Q, K. Li, Y. Wu, and H. Liu, "Optimization of Stabilization Conditions for Electrospun Polyacrylonitrile Nanofibers", Polym. Degrad. Stabil., 2012, 97, 1511-1519.
E. Frank, F. Hermanutz, and M. R. Buchmeiser, "Carbon Fibers: Precursors, Manufacturing, and Properties", Macromol. Mater. Eng., 2012, 297, 493-501.
C. D. Doyle, "Estimating Thermal Stability of Experimental Polymer by Empirical Thermogravimetric Analysis", Anal. Chem., 1961, 33, 77-79.
M. K. Ismail, "On the Reactivity, Structure, and Porosity of Carbon Fibers and Fabrics", Carbon, 1991, 29, 777-792.
P. Gao, H. Wang, and Z. Jin, "Study of Oxidation Properties and Decomposition Kinetics of Three-dimensional (3-D) Braided Carbon Fiber", Thermochimica Acta, 2004, 414, 59-63.
M. Jing, C. G. Wang, B. Zhu, Y. X. Wang, X. P. Gao, and W. N. Chen, "Effects of Preoxidation and Carbonization Technologies on Tensile Strength of PAN-based Carbon Fiber", J. Appl. Polym. Sci., 2008, 108, 1259-1264.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.