다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
International journal of precision engineering and manufacturing, v.17 no.10, 2016년, pp.1305 - 1312
Kim, Jeong-Gil (Convergence Components and Agricultural Machinery Application Group, Korea Institute of Industrial Technology) , Park, Young-Jun (Department of System Reliability, Korea Institute of Machinery and Materials) , Lee, Geun-Ho (Department of System Reliability, Korea Institute of Machinery and Materials) , Kim, Jae-Hoon (School of Mechanical Engineering, Chungnam National University)
AI-Helper
In this study, the test was conducted to verify the effect of carrier pinhole position errors on planetary gearbox load sharing. A 3D measurement was conducted to check the pinhole position errors of a carrier that was produced at an actual industrial site. A strain gauge was attached to the planet ...
American Gear Manufacturers Association 2006 Design Manual for Enclosed Epicyclic Gear Drives American Gear Manufacturers Association, “Design Manual for Enclosed Epicyclic Gear Drives,” ANSI/AGMA 6123-B06, 2006.
Bulletin of JSME T. Hidaka 19 132 690 1976 10.1299/jsme1958.19.690 Hidaka, T. and Terauchi, Y., “Dynamic Behavior of Planetary Gear: 1st Report Load Distribution in Planetary Gear,” Bulletin of JSME, Vol. 19, No. 132, pp. 690-698, 1976.
Bulletin of JSME T. Hidaka 22 167 748 1979 10.1299/jsme1958.22.748 Hidaka, T., Terauchi, Y., and Dohi, K., “On the Relation between the Run-Out Errors and the Motion of the Center of Sun Gear in a Stoeckicht Planetary Gear,” Bulletin of JSME, Vol. 22, No. 167, pp. 748-754, 1979.
Bulletin of JSME T. Hidaka 22 170 1142 1979 10.1299/jsme1958.22.1142 Hidaka, T., Terauchi, Y., and Nagamura, K., “Dynamic Behavior of Planetary Gear: 7th Report, Influence of the Thickness of the Ring Gear,” Bulletin of JSME, Vol. 22, No. 170, pp. 1142-1149, 1979.
Bulletin of JSME T. Hayashi 29 253 2290 1986 10.1299/jsme1958.29.2290 Hayashi, T., Li, X.Y., Hayashi, I., Endo, K., and Watanabe, W., “Measurement and Some Discussions on Dynamic Load Sharing in Planetary Gears,” Bulletin of JSME, Vol. 29, No. 253, pp. 2290-2297, 1986.
Journal of Mechanical Design A. Singh 127 3 469 2005 10.1115/1.1864115 Singh, A., “Application of a System Level Model to Study the Planetary Load Sharing Behavior,” Journal of Mechanical Design, Vol. 127, No. 3, pp. 469-476, 2005.
Journal of Mechanical Design H. Ligata 130 4 041701 2008 10.1115/1.2885194 Ligata, H., Kahraman, A., and Singh, A., “An Experimental Study of the Influence of Manufacturing Errors on the Planetary Gear Stresses and Planet Load Sharing,” Journal of Mechanical Design, Vol. 130, No. 4, Paper No. 041701, 2008.
F. Oyague 2010 Proc. of Windpower Conference and Exhibition Oyague, F., Gorman, D., and Sheng, S., “NREL Gearbox Reliability Collaborative Experimental Data Overview and Analysis,” Proc. of Windpower Conference and Exhibition, NREL/CP-500-48232, 2010.
W. LaCava 2012 Proc. of 53rd Structures, Structural Dynamics, and Materials and Colocated Conference LaCava, W., Keller, J., and McNiff, B., “Gearbox Reliability Collaborative: Test and Model Investigation of Sun Orbit and Planet Load Share in a Wind Turbine Gearbox,” Proc. of 53rd Structures, Structural Dynamics, and Materials and Colocated Conference, AIAA2012-1418, 2012.
J. Keller 2012 Proc. of Leuven Conference on Noise and Vibration Engineering Keller, J., Guo, Y., LaCava, W., Link, H., and McNiff, B., “Gearbox Reliability Collaborative Phase 1 and 2: Testing and Modeling Results,” Proc. of Leuven Conference on Noise and Vibration Engineering, NREL/CP-5000-55207, 2012.
J. S. Nam 119 2014 Proc. of the KSMTE Autumn Conference Nam, J. S., Park, Y. J., Kim, J. K., Lee, G. H., Han, J. W., and Nam, Y. Y., “Effect of Non-Torque Loadings on the Load Sharing Characteristics of Planetary Gearbox,” Proc. of the KSMTE Autumn Conference, p. 119, 2014.
Transactions of the Korean Society of Mechanical Engineers A J. W. Park 37 11 1407 2013 10.3795/KSME-A.2013.37.11.1407 Park, J. W., Choi, B. O., and Kim, K. K., “Study on Accelerated Life Testing of Swing Reduction Gear Box for Hybrid Excavator,” Transactions of the Korean Society of Mechanical Engineers A, Vol. 37, No. 11, pp. 1407-1413, 2013.
Transactions of the Korean Society of Mechanical Engineers A Y. B. Lee 36 11 1441 2012 10.3795/KSME-A.2012.36.11.1441 Lee, Y. B. and Kim, K. M, “Analysis of Performance Characteristics of Swash-Plate-Type Hydraulic Piston Motor,” Transactions of the Korean Society of Mechanical Engineers A, Vol. 36, No. 11, pp. 1441-1446, 2012.
IET Renewable Power Generation F. Spinato 3 4 387 2009 10.1049/iet-rpg.2008.0060 Spinato, F., Tavner, P., Van Bussel, G., and Koutoulakos, E., “Reliability of Wind Turbine Subassemblies,” IET Renewable Power Generation, Vol. 3, No. 4, pp. 387-401, 2009.
JSME International Journal Series C A. Bodas 47 3 908 2004 10.1299/jsmec.47.908 Bodas, A. and Kahraman, A., “Influence of Carrier and Gear Manufacturing Errors on the Static Load Sharing Behavior of Planetary Gear Sets,” JSME International Journal Series C, Vol. 47, No. 3, pp. 908-915, 2004.
G. Lloyd 2003 Guideline for the Certification of Wind Turbines Lloyd, G. and Hamburg, G., “Guideline for the Certification of Wind Turbines,” GL 2003, 2003.
International Electrotechnical Commission (IEC), “Wind Turbines-Part 4: Design Requirements for Wind Turbine Gearboxes,” IEC 61400-4, 2010.
해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.