AI 본문요약

엑셀 다운로드 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

참고문헌 (16)

1. Q. Liu, Y. Lin, Z. Zong, G. Sun, Q. Li, 2013, Lightweight Design of Carbon Twill Weave Fabric Composite Body Structure for Electric Vehicle, Compos. Struct., Vol. 97, pp. 231~238. 

   상세보기

2. D. Stefaniak, E. Kappel, T. Spröwitz, C. Hühne, 2012, Experimental Identification of Process Parameters Inducing Warpage of Autoclave-processed CFRP Parts, Composites Part A, Vol. 43, No. 7, pp. 1081~1091. 

   상세보기

3. C. Anthony, R. Dipa, O. Winifred, C. Gearoid, R. Inga, S. Walter, 2014, OOA (Out-Of-Autoclave) Manufacturing of Benzoxazine Resin-systems by LRI (Liquid-Resin-Infusion) for Ambient and High Temperature Aerospace Applications, International Conference and Forum SAMPE EUROPE 35 th , pp. 69~76. 

4. J. Yanagimoto, K. Ikeuchi, 2012, Sheet Forming Process of Carbon Fiber Reinforced Plastics for Lightweight Parts, CIRP Annals-Manufacturing Technology, Vol. 61, No. 1, pp. 247~250. 

   상세보기

5. S. Pimenta, S. T. Pinho, 2011, Recycling Carbon Fibre Reinforced Polymers for Structural Applications: Technology Review and Market Outlook, Waste Manage., Vol. 31, No.2, pp. 378~392. 

   상세보기

6. I. Taketa, K. Yamaguchi, E. Wadahara, M. Yamasaki, T. Sekido, A. Kitano, 2006, The CFRP Automobile Body Project in Japan. In Proceedings of 12th US-Japan Conference Computational Materials, pp. 411~421 

7. J. Wulfsberg, A. Herrmann, G. Ziegmann, G. Lonsdorfer, N. Stöß, M. Fette, 2014, Combination of Carbon Fibre Sheet Moulding Compound and Prepreg Compression Moulding in Aerospace Industry, Procedia Eng., Vol. 81, pp. 1601~1607. 

   상세보기

8. K. Vanclooster, 2009, Forming of Multilayered Fabric Reinforced Thermoplastic Composites, Leuven: University of Leuven. 

9. G. Lebrun, M. N. Bureau, J. Denault, 2003, Evaluation of Bias-extension and Picture-frame Test Methods for the Measurement of Intraply Shear Properties of PP/glass Commingled Fabrics, Compos. Struct., Vol. 61, No. 4, pp. 341~352. 

   상세보기

10. P. Bekampienė, J. Domskienė, 2009, Analysis of Fabric Specimen Aspect Ratio and Deformation Mechanism during Bias Tension, Mater. Sci. (Medžiagotyra), Vol. 15, No. 2. 

11. P. Hallander, M. Akermo, C. Mattei, M. Petersson, T. Nyman, 2013, An Experimental Study of Mechanisms Behind Wrinkle Development during Forming of Composite Laminates, Composites Part A, Vol. 50, pp. 54~64. 

    상세보기

12. R. Akkerman, R. Ten Thije, U. Sachs, M. De Rooij, 2010, Friction in Textile Thermoplastic Composites Forming, In Proceedings of the 10th International Conference on Textile Composites-TEXCOMP, Vol. 10, pp. 271~279. 

13. ASTM International, 2012, Standard Test Methods for Stiffness Fabric, ASTM D1388, American Society for Testing Materials. 

14. Q. Chen, P. Boisse, C. H. Park, A. Saouab, J. Bréard, 2011, Intra/inter-ply Shear Behaviors of Continuous Fiber Reinforced Thermoplastic Composites in Thermoforming Processes, Compos. Struct., Vol. 93, No. 7, pp. 1692~1703. 

    상세보기

15. K. Akiyama, Development of PCM Technology, MITSUBISHI RAYON CO., LTD. 

16. J. M. Lee, K. H. Lee, B. M. Kim, D. C. Ko, 2016, Design of Roof Panel with Required Bending Stiffness using CFRP Laminates, Int. J. Precis. Eng. Manuf., Vol. 17. No. 4, pp. 479~485. 

    상세보기

저자의 다른 논문 :

김병민 (263) 고대철 (51)