최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국산학기술학회논문지 = Journal of the Korea Academia-Industrial cooperation Society, v.17 no.5, 2016년, pp.36 - 41
곽신영 (한국원자력연구원) , 김현수 (선문대학교 건축사회환경학부)
In this study, numerical analyses were used to investigate the performance of a coupling control method for the dynamic responses of adjacent buildings under multiple hazards. Numerical simulations were done using the earthquake loads of regions with strong seismicity in Los Angeles, California, and...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
인공 지진하중과 풍하중은 무엇을 바탕으로 생성하였나? | 이를 위하여 강진지역인 LA 지역의 지진하중과 강풍지역인 찰스턴 지역의 풍하중을 사용하여 수치해석을 수행하였다. 인공 지진하중과 풍하중은 ASCE 7-10을 바탕으로 생성하였고 인공지진하중은 SIMQKE을 사용하여 작성하였으며 인공풍하중은 Kaimal Spectrum을 이용하여 작성하였다. 10층 및 20층의 인접구조물을 예제구조물로 사용하였고 비선형 이력댐퍼를 이용하여 연결제어를 하였다. | |
인공지진하중과 인공풍하중에서 이용한 것은? | 이를 위하여 강진지역인 LA 지역의 지진하중과 강풍지역인 찰스턴 지역의 풍하중을 사용하여 수치해석을 수행하였다. 인공 지진하중과 풍하중은 ASCE 7-10을 바탕으로 생성하였고 인공지진하중은 SIMQKE을 사용하여 작성하였으며 인공풍하중은 Kaimal Spectrum을 이용하여 작성하였다. 10층 및 20층의 인접구조물을 예제구조물로 사용하였고 비선형 이력댐퍼를 이용하여 연결제어를 하였다. | |
층당 2개 이상의 감쇠기를 설치해야 층간변위 설계기준을 만족시킬 수 있는 이유는? | LA 지역의 지진하중에 의한 최대 층간변위의 경우에는 층당 설치되는 감쇠기의 수가 8개까지는 응답이 감소하다가 그 이상은 감쇠기를 증가시켜도 응답성능의 개선이 거의 이루어지지 않는다. LA 지역은 강진지역이기 때문에 연결제어를 사용하지 않은 경우에는 예제구조물이 지진하중에 의한 층간변위 설계기준을 만족시키지 못한다. 따라서 층당 2개 이상의 감쇠기를 설치해야 층간변위 설계기준을 만족시킬 수 있다. |
R.E. Klein, C. Cusano, J. Stukel, "Investigation of a method to stabilize wind induced oscillations in large structures," Proceedings of ASME Winter Annual Meeting, New York, Paper No. 72-WA/AUT-H, 1972.
D.G. Lee, H.S. Kim, H. Ko, "Evaluation of Coupling-Control Effect of a Sky-Bridge for Adjacent Tall Buildings", The Structural Design of Tall and Special Buildings, Vol. 21,, pp.311-328, 2012. DOI: http://dx.doi.org/10.1002/tal.592
R.E. Christenson, B.F. Spencer, Jr., E.A. Johnson, K. Seto, "Coupled building control considering the effects of building/connector configuration", Journal of Structural Engineering, Vol. 132, No. 6, pp. 853-863, 2006. DOI: http://dx.doi.org/10.1061/(ASCE)0733-9445(2006)132:6(853)
H.S. Kim, "Multi-objective optimal design using genetic algorithm for semi-active fuzzy control of adjacent buildings", Journal of the Korea Academia-Industrial cooperation Society, Vol. 17, No. 1 pp. 219-224, 2016.
R. Bell, T. Glade, "Multi-Hazard Analysis in Natural Risk Assessments", International Conference on Computer Simulation Risk Analyses and Hazard Mitigation. pp. 197-206, 2004.
M.S Kappes, M. Keiler, K. Elverfeldt, T. Glade, "Challenges of analyzing multi-hazard risk: a review", Natural Hazards, Vol. 64, pp. 1925-1958, 2012. DOI: http://dx.doi.org/10.1007/s11069-012-0294-2
R.H. Sues, S.T. Mau, Y.K. Wen, "System identifcation of degrading hysteretic restoring forces", Journal of Engineering Mechanics, ASCE, Vol. 114, No. 5, pp. 833-846, 1988. DOI: http://dx.doi.org/10.1061/(ASCE)0733-9399(1988)114:5(833)
A. Tallin, B. Ellingwood, "Wind induced lateraltorsional motion of buildings", ASCE Journal of Structural Engineering. Vol. 111, No. 10, pp. 2197-213, 1985. DOI: http://dx.doi.org/10.1061/(ASCE)0733-9445(1985)111:10(2197)
ASCE 7-10, Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers.
D.A. Gasparini, E.H. Vanmarcke, "Simulated earthquake motions compatible with prescribed response spectra", Civil Engineering Research Report R76-4, Massachusetts Institute of Technology, Cambridge, USA, 1976.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.