$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

Development of Blue Light Cut Films Using a Roll-to-Roll Nano Micro Coating System 원문보기

Transactions on electrical and electronic materials, v.17 no.3, 2016년, pp.178 - 181  

Hwang, Joong Kook (Department of Convergence Science and Technology, Dong-A University, PROTEM Co., Ltd.) ,  Shina, Hoon-Kyu (National Institute for Nanomaterials Technology, Pohang University of Science and Technology) ,  Chang, Sang-Mok (Department of Convergence Science and Technology, Dong-A University)

Abstract AI-Helper 아이콘AI-Helper

In this study a coating experiment was performed to fabricate blue light cut films, which represent a 390~430 nm cut off rate of more than 40% and a transmittance rate of more than 90%, using a roll-to-roll nano micro coating system. The study also analyzed the characteristics of the blue light cut ...

주제어

AI 본문요약
AI-Helper 아이콘 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

제안 방법

  • In this study, different coating processes were implemented using the blue light cut solution, which is compounded through an organic-inorganic sol-gel process. The blue light cut off rates of the blue light cut film were measured at wavelengths of 390~430 nm using a spectrometer (CM-3700d).
  • In Korea, however, developments of these products are still not conducted due to the lack of recognition in the hazardousness of the blue light. Therefore, in this study a study on developing blue light cut films, which satisfy a 390∼430 nm cut off rate of more than 40% and a transmittance rate of more than 90%, was imple mented using a nano micro coating system.
본문요약 정보가 도움이 되었나요?

참고문헌 (13)

  1. K. J. Ruschak, Chemical Engineering Science, 31, 1057 (1976). [DOI: http://dx.doi.org/10.1016/0009-2509(76)87026-1] 

  2. K. Y. Lee, L. D. Liu, and T. J. Liu, Chemical Engineering Science, 47, 1703 (1992). [DOI: http://dx.doi.org/10.1016/0009-2509(92)85018-7] 

  3. S. W. Bae, D. S. Kim, and J. M. Cho, Korea Precision Engineering Conference, 14, 14A557 (2014). 

  4. S. Kwak, J. Shim, H. G. Yoon, and K. H. Lee, Polymer Sci. Tech., 14, 181 (2003). 

  5. S. W. Kim, Korean J. Chem. Eng., 28, 298 (2011). [DOI: http://dx.doi.org/10.1007/s11814-010-0338-9] 

  6. Y. J. Ji, Y. J. Shin, Y. R. Shin, J. Y. Kim, Y. S. Yoon, and J. S. Shin, J. Adhesion & Interface, 7, 10 (2006). 

  7. J. D. Kim, H. J. Kim, S. W. Koh, and Y. S. Kim, J. Kor. Soc. Pow. Sys. Eng., 14, 83 (2010). 

  8. A. Dasari, Z. Z. Yu, and Y. W. Mai, Mat. Sci. and Tech., 63, 31 (2009). 

  9. J. J. Choi, N. W. Kim, C. W. An, and G. C. Song, Korea Institute of Chemical Engineers, 52, 388 (1994). 

  10. M. S. Lee and N. J. Jo, J. Korean Ind. Eng. Chem., 12, 643 (2001). 

  11. K. C. Song and S. E. Pratsinis, J. Colloid Interface Sci., 231, 289 (2000). [DOI: http://dx.doi.org/10.1006/jcis.2000.7147] 

  12. S. J. Park, J. S. Jin, and J. R. Lee, J. Korean Ind. Eng. Chem., 12, 143 (2001). 

  13. J. D. Mackenzie and E. P. Bescher, J. Sol-Gel Sci. Tech., 19, 23 (2000). [DOI: http://dx.doi.org/10.1023/A:1008701903087] 

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

GOLD(Hybrid)

저자가 APC(Article Processing Charge)를 지불한 논문에 한하여 자유로운 이용이 가능한, hybrid 저널에 출판된 논문

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로