다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Elastomers and composites = 엘라스토머 및 콤포지트, v.51 no.2, 2016년, pp.81 - 92
Lim, Seok-Hwan (Department of Chemical Engineering, Pusan National University) , Lee, Sangdae (Department of Chemical Engineering, Pusan National University) , Lee, Noori (Department of Chemical Engineering, Pusan National University) , Ahn, Byeong Kyu (Department of Chemical Engineering, Pusan National University) , Park, Nam (R&D Division, Nexentire) , Kim, Wonho (Department of Chemical Engineering, Pusan National University)
AI-Helper
1,3-Diphenylguanidine (DPG) is commonly used as a secondary accelerator which not only acts as booster of cure but also activating silanization reaction. The aim of this study is to increase the interaction between silica and rubber by using DPG. In this study, mixing was proceeded in two steps. The...
G. Heinrich and T. A. Vilgis, "Why silica technology needs SSBR in high performance tires? The physics of confined polymers in filled rubbers", Kaut. Gummi Kunstst., 61, 368 (2008).
B. Schwaiger and A. Blume, "Silica/silane - a winning reinforcement formula", Rubber World, 222, 32 (2000).
H.-D. Luginsland and W. Niedermeier," New reinforcing materials for rising tire performance demands", Rubber World, 228, 34 (2003).
M. P. Wagner, "Reinforcing Silicas and Silicates", Rubber Chem. Technol., 49, 703 (1976).
G. Mathew, M. Y. Huh, J. M. Rhee, M. H. Lee, and C. Nah, "Improvement of properties of silica-filled styrene-butadiene rubber composites through plasma surface modification of silica", Polym. Adv. Technol., 15, 400 (2004).
Werner Hofman, In: Rubber Technology Handbook - Ed. Werner.
S. Wolff, U. Gorl, M. J. Wang, and W. Wolff, "Silane modified silica", Eur. Rubber J., 16, 16 (1994).
M. L. Hair and W. Hertl, "Acidity of surface hydroxyl groups", J. Phys. Chem., 74, 91 (1970).
M. J. Wang and S. Wolff, "Filler-elastomer interactions. Part 2. Investigation of the energetic heterogeneity of silica surfaces", Kaut. Gummi Kunstst., 45, 11 (1992).
A. I. Medalia, "Filler Aggregates and Their Effect on Reinforcement", Rubber Chem. Technol., 47, 411 (1974).
C. Hepburn, on "Filler reinforcement of rubber", Plastics and Rubber International, 9, 11 (1984).
M. P. Wagner, "Reinforcing Silicas and Silicates", Rubber Chem. Technol., 49, 703 (1976).
S. D. Patkar, L. R Evans, and W. H. Waddel, Rubber Plast News, p. 237, (Sept., 1997).
F. Yatsuyanagi, N. Suzuki, and H. Kaidou, "Effects of Surface Chemistrys of Silica Particles on the Mechanical Properties of Silica Filled Styrene-Butadiene Rubber Systems", Polymer Journal, 34, 332 (2002).
Y. Bomal, P. Cochet, B. Dejean, and J. Machurat, "Influence of mixing procedures on the properties of a silica reinforced agricultural tire tread", Rubber World, 208, 33 (1993).
W. K. Diekes, J. W. M. Noordermeer, K. Kelting, and A. Limper, "Improving silica compound processing: optimization of the mixing equipment", Rubber World, 229, 6 (2004).
S. Wolff, "Chemical Aspects of Rubber Reinforcement by Fillers", Rubber Chem. Technol., 69, 325 (1996).
T. Kataoka, B. Zetterlund, and B. Yamada, "Effect of mixing sequence on the properties of carbon black and silica filled rubber", Plast. Rubber Comp., 32, 291 (2003).
H. D. Luginland, "Processing of the organo silane Si69", SRC conference, Puchov, Poland (1999).
A. Hashim, B. Azahari, Y. Ikeda, and S. Kohjiya, "The Effect of Bis(3-Triethoxysilylpropyl) Tetrasulfide on Silica Reinforcement of Styrene-Butadiene Rubber", Rubber Chem. Technol., 71, 289 (1998).
J. Ten Brinke, S. Debnath, L. Reuvekamp, and J. Noordermeer, "Mechanistic aspects of the role of coupling agents in silica-rubber composites", Compos. Sci. Technol., 63, 1165 (2003).
G. Thielen and C. Berg, "Hydroxy and nitrile modified emulsion SBR's in silica compounds", Kaut. Gummi Kunstst., 61, 377 (2008).
S. S. Choi and S. Park, "Influence of Kinds of Fatty Acids and Poly(ethylene glycol)s on Properties of Silica-Filled Natural Rubber Compounds", Korea Polym. J., 9, 92 (2001).
W. David, "Rubber composition for a tire comprising a reinforcing inorganic filler and an (inorganic filler/elastomer) coupling system", U. S. Pat. 6.951.897 to Michelin Recherche et Technique S. A., (23-07-2002).
W. Katarzyna, "Rubber composition for a tire comprising a reinforcing inorganic filler and an (inorganic filler/elastomer) coupling system", U. S. Pat. 6.984.689 to Michelin Recherche et Technique S. A., (23-07-2002)
M. Zaboski and J. B. Donnet, "Activity of fillers in elastomer networks of different structure (pages 87-100)", Macromol. Symp., 194, 87 (2003).
J. Ramier, L. Chazeau, C. Gauthier, L. Guy, and M. N. Bouchereau, "Influence of silica and its different surface treatments on the vulcanization process of silica filled SBR," Rubber Chem. Technol., 80, 183 (2007).
S. Mihara, "Reactive processing of silica-reinforced tire rubber: new insight into the time- and temperature-dependence of silica rubber interaction. Ph.D thesis, University of Twente, Enschede, the Netherlands (2009).
J. Byers, "Silane coupling agents for enhanced silica performance", Rubber World, (Sept., 1998).
K. J. Kim and J. Vanderkooi, "The Dispersion of Carbon Black in Rubber Part III. The Effect of Dispersion Quality on the Dynamic Mechanical Properties of Filled Natural Rubber", Rubber Chem. Technol., 65, 1016 (1992).
L. Guy, S. Daudey, P. Cochet, and Y. Bomal, "New Insights in the Dynamic Properties of Precipitated Silica Filled Rubber Using a New High Sureface Silica", Kautsch. Gummi Kunststr., 62, 383 (2009).
A. E. Juve, in: Vulcanization of Elastomers, C. Alliger, I. J. Sjothum (Eds.), Reinhold PC, New York 1964, Chapt. 2
D. S. Campbell, "Structural Characterization of Vulcanizates Part X. Thiol-Disulfide Interchange for Cleaving Disulfide Crosslinks in Natural Rubber Vulcanizates", Rubber Chem. Teclmol., 43, 210 (1970).
J. I. Cunneen and R. M. Russell, "Occurrence and Prevention of Changes in the Chemical Structure of Natural Rubber Tire Tread Vulcanizates during Service", Rubber Chem. Teclmol., 43, 1215 (1970).
D. S. Campbell and B Saville, Proc Intern Rubb Conf, Brighton (1967) Part 1.
D. S. Campbell, "Structural characterization of vulcanizates part X. Thiol-disulfide interchange for cleaving disulfide crosslinks in natural rubber vulcanizates", J. Appl. Poly Sci., 13, 1201 (1969).
P. J. Flory and J. Rehner, "Statistical Mechanics of Cross-Linked Polymer Networks I. Rubber like Elasticity", J. Chem. Phys., 11, 521 (1943).
B. Saville and A. A. Watson, "Structural Characterization of Sulfur-Vulcanized Rubber Networks", Rubber Chem. Technol., 40, 100 (1967).
M. Porter, "Structural Characterization of Filled Vulcanizates Part 1. Determination of the Concentration of Chemical Crosslinks in Natural Rubber Vulcanizates Containing High Abrasion Furnace Black", Rubber Chem. Technol., 40, 866 (1967).
J. W. ten Brinke, "Silica reinforced tyre rubbers: mechanistic aspects of the role of coupling agents", PhD. Thesis: 2002, Dept. of Rubber Technology, Univ. of Twente, Enschede, the Netherlands.
S. Mihara, R. N. Datta, A. G. Talma, and J. W. M. Noordermeer, "Rubber composition", (to the Yokohama Rubber Co., Ltd. Tokyo, JP), U.S. Patent 7923493, April 12 (2011).
P. Sa-Nguanthammarong, "A study of abrasion resistance of silica-filled natural rubber and its improvement", Mahidol University (1999).
S. Toki, W. Sainumsai, and K. Suchiva, "Crosslink, entanglement and strain-induced crystallization of NR", Constitutive Models for Rubbers IX, pp. 515-520.
S. Wolff, "Silanes in Tire Compounding After Ten Years - A Review", Tire Sci. Technol., 15, 276 (1987).
M. Wang, "Effect of Polymer-Filler and Filler-Filler interactions on Dynamic Properties of Filled-Vulcanizates", Rubber Chem. Technol., 71, 520 (1998).
L. Nikiel, M. Gerspacher, H. Yang, and C. P. O'Farrell, "Filler Dispersion, Network Density, and Tire Rolling Resistance", Rubber Chem. Technol., 74, 249 (2001).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.