최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기태양광발전학회 = Bulletin of the Korea Photovoltaic Society, v.2 no.1, 2016년, pp.18 - 25
김은주 (한국기계연구원 부설 재료연구소 표면연구본부) , 임재홍 (한국기계연구원 부설 재료연구소 표면연구본부)
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
태양광 에너지의 양을 전력으로 환산한다면? | 태양광 에너지의 양은 태양에서 약 1억 5,000만 km 떨어진 지구에 들어오는 양을 전력으로 환산한다면 약 1.77x1012mW/cm2이다. 이 값은 전 세계의 평균 소비전력에 비교했을 경우 수십만 배로 크다. | |
지구상에 입사되는 태양광의 단점에도 불구하고 태양광 에너지를 이용한 연구가 활발히 진행되는 이유는? | 하지만 이러한 단점에도 불구하고 태양광 에너지를 이용한 연구는 활발히 진행되고 있다. 태양광 에너지는 입사되는 광선이 무한하며 경비가 들지 않으며, 열에너지를 매개로 하는 화력, 원자력 등의 에너지와는 다르게 열에너지를 매개로 하지 않는다는 점이다. 더 나아가 태양광 발전의 생산단가는 매년 10~11%씩 저렴해지고 있으며, 머지않아 전 세계 80% 지역에서 태양광 에너지가 석탄 및 원자력 에너지보다 더 저렴해 지는 등 태양광 에너지에 대해 긍정적으로 평가되고 있다. 70년대 13%의 변환효율을 가지는 실리콘 태양전지를 시작으로 그림 1과 같이 태양광발전 기술 변화에 따라 고효율의 태양전지가 개발되고 있다. | |
결정질 실리콘 태양전지의 전극의 태양전지 시장에서의 영향력은? | 결정질 실리콘 태양전지의 전극은 태양전지 시장의 80% 이상을 차지하고 있어 제조단가에 크게 영향을 미칠 뿐만이 아니라 효율에도 크게 영향을 미친다. n-type과 p-type의 실리콘 반도체를 접합해 오믹접촉을 형성하며, 전면에는 Ag 페이스트를, 후면에는 Al 페이스트를 이용해 형성한다. |
Solanki, M.C.R.a.C.S., Review of Ni-Cu Based Front Side Metallization for c-Si Solar Cells. Journal of Solar Energy, 2013. 2013: pp. 20.
Hilali, M.M., Understanding and development of manufacturable screen-printed contacts on high sheet-resistance emitters for low-cost silicon solar cells. 2005, Georgia Institute of Technology.
Cheek, G.C., et al., Thick-film metallization for solar cell applications. Electron Devices, IEEE Transactions on, 1984. 31(5): pp. 602-609.
Prudenziati, M., et al., Ag-based thick-film front metallization of silicon solar cells. Active and passive electronic components, 1989. 13(3): pp. 133-150.
Hilali, M.M., et al., Effect of glass frit chemistry on the physical and electrical properties of thick-film Ag contacts for silicon solar cells. Journal of electronic materials, 2006. 35(11): pp. 2041-2047.
Hsu, H., et al., Mechanism of immersion deposition of Ni-P films on Si (100) in an aqueous alkaline solution containing sodium hypophosphite. Thin Solid Films, 2009. 517(17): pp. 4786-4791.
Mallory, G.O. and J.B. Hajdu, Electroless plating: fundamentals and applications. 1990: William Andrew.
Blakers, A. and M. Green, 20% efficiency silicon solar cells. Applied physics letters, 1986. 48(3): pp. 215-217.
이지훈, 조경연, 이수홍, 고효율, 저가화 실리콘태양전지를 위한 Ni/Cu/Ag 금속전극의 특성 연구. 한국태양에너지학회 2009 년도 춘계학술발표대회 논문집, 2009: pp. 235-240.
Gorostiza, P., et al., Charge Exchange Processes during the OpenCircuit Deposition of Nickel on Silicon from Fluoride Solutions. Journal of The Electrochemical Society, 2000. 147(3): pp. 1026-1030.
Allongue, P., V. Kieling, and H. Gerischer, Etching mechanism and atomic structure of H Si (111) surfaces prepared in NH 4 F. Electrochimica Acta, 1995. 40(10): pp. 1353-1360.
Carraro, C., R. Maboudian, and L. Magagnin, Metallization and nanostructuring of semiconductor surfaces by galvanic displacement processes. Surface Science Reports, 2007. 62(12): pp. 499-525.
Yao, Y., et al., Uniform plating of thin nickel layers for silicon solar cells. Energy Procedia, 2013. 38: pp. 807-815.
Hameiri, Z., L. Mai, and S. Wenham, Advantages of photoplating for laser doped solar cells. Progress in Photovoltaics: Research and Applications, 2011. 19(5): pp. 511-516.
Lee, S.H., Review of the potential of the Ni/Cu plating technique for crystalline silicon solar cells. Materials, 2014. 7(2): pp. 1318-1341.
권재홍, 이수홍, 고효율 실리콘 태양전지의 개발현황. 한국태양에너지학회 2003년도 춘계학술발표대회 논문집, 2003: pp. 45-50.
김민정, 이수홍, 결정질 실리콘 태양전지에 적용될 Lightinduced plating을 이용한 Ni/Cu 전극에 관한 연구. 한국태양에너지학회 2009년도 추계학술발표대회 논문집, 2009: pp. 350-355.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.