최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국압력기기공학회 논문집 = Transactions of the Korean Society of Pressure Vessels and Piping, v.12 no.1, 2016년, pp.30 - 40
The paper investigates the previous studies about welding residual stresses in nuclear components. First, various residual stress measurement methods are reviewed in applicability. Second a finite element welding residual stress analysis technique, which was developed from the viewpoint of FFS (Fitn...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
PWSCC는 어떠한 조건이 동시에 만족되어야 발생하는가? | 국내외적으로 가압경수로 원전 안전 1등급 기기의 Alloy 600 계열 합금 용접부에 일차수응력부식균열(PWSCC : Primary Water Stress Corrosion Cracking)이 발생하여 원자로냉각재가 누설된 사례가 다수 보고되고 있다(1~5). 이러한 PWSCC는 PWSCC에 예민한 재질, 부식환경, 인장응력 조건이 동시에 만족하여만 발생하는 대표적인 경년열화 기구이다. 용접과정 동안의 국부적인 가열과 냉각에 기인하여 발생하는 인장 용접 잔류응력은 가압경수로의 1차측 고온 수화학 환경 하에서 PWSCC에 예민한 재질인 Alloy 600 계열 합금으로 제작된 용접부의 PWSCC발생 요인 중 하나이다. | |
인장 용접 잔류응력은 어떠한 요인에 의해 발생되는가? | 이러한 PWSCC는 PWSCC에 예민한 재질, 부식환경, 인장응력 조건이 동시에 만족하여만 발생하는 대표적인 경년열화 기구이다. 용접과정 동안의 국부적인 가열과 냉각에 기인하여 발생하는 인장 용접 잔류응력은 가압경수로의 1차측 고온 수화학 환경 하에서 PWSCC에 예민한 재질인 Alloy 600 계열 합금으로 제작된 용접부의 PWSCC발생 요인 중 하나이다. 또한, 잔류응력은 PWSCC뿐만 아니라 피로균열을 발생시키고 성장시키는 구동력들 중 하나로 고려되고 있다(6). | |
용접 잔류응력 평가의 한계점은 무엇인가? | 용접 잔류응력 평가 방법론의 신뢰성 향상/표준화와 용접 잔류응력 분포의 대표화를 위해 국제Round Robin JIP (Joint Industry Project)들(8,27,28)이 수행되었고 이러한 JIP 결과들은 R6 코드(29), API 579/ASME FFS-1(30) 등 사용중적합성 (FFS : Fitness-For-Service) 평가 코드에 반영되어 해당 코드 내에 공학적 잔류응력 평가식이 제시되고 있다. 여전히 잔류응력 평가에 많은 산포도가 존재한다고 알려져 있으며 코드 내 평가식을 이용하여 도출된 잔류응력 분포만을 유한요소 해석 결과와 비교하여 공학적 평가식을 신뢰할 수 없다는 일부 의견들이 제시되고 있다. 적절한 보수성이 확보된 잔류응력 평가를 위해서는 이러한 산포도와 공학적 평가식을 도출한 기술적 근거를 인식하고 있어야 한다. |
USNRC, 2008, Davis-Besse Reactor Pressure Vessel Head Penetration: Overview, Lessons Learned, and NRC Actions Based on Lessons Learned, NUREG/BR-0353, Rev.1.
USNRC, 2005, U.S. Plant Experience with Alloy 600 Cracking and Boric Acid Corrosion of Light-Water Reactor Pressure Vessel Materials, NUREG-1823.
http://www.nrc.gov/reactors/operating/ops-experience/pressure-boundary-integrity/weld-issues/
KHNP, 2009, Structural Integrity Report for Dissimilar Metal Welds on SG Drain Nozzle of Y#4.
KHNP, 2011, Structural Integrity Report for Dissimilar Metal Welds on RPV Upper Head Vent Nozzle of Y#4.
Gubeljak, Nenad, et al., 2005, "Effect of residual stresses on the fatigue crack propagation in welded joints," J. of ASTM International, Vol. 2, No. 3.
Dong, P. and Hong, J.K., Recommendations for Determining Residual Stresses in Fitness-For-Service Assessment, WRC Bulletin 476, 2002.
Koppenhoefer, K.C. and Gordan, R., 2000, "IIW X-XV RSDP residual stress round-robin results-pahse 1," Presentation at IIW 2000 Annual Assembly, Florence, Italy, IIW-X- XV- RSDP-50-2000.
EPRI, TR-1009403, Material Reliability Program: Reactor Vessel Head Nozzle and Weld Safety Assessment for Westinghouse and Combustion Engineering Plants, (MRP-104), 2004.
EPRI, TR-103696, PWSCC of Alloy 600 Materials in PWR Primary System Penetrations, 1994.
Westinghouse, WCAP-16024-P, Structural Integrity Evaluation of Reactor Vessel Upper Head Penetrations to Support Continued Operation: K-1 Nuclear Power Station, 2003.
Kim, Jong Sung and Seo, Joong Hyun, 2012, "A study on welding residual stress analysis of a small bore nozzle with dissimilar metal welds," Int. J. of Pressure Vessels and Piping, Vol. 90-91, pp. 69-75.
Kang, Sung-Sik, et al., 2014, "The experience and analysis of vent pipe PWSCC (primary water stress corrosion cracking) in PWR vessel head penetration," Nuclear Engineering and Design, Vol. 269, pp. 291-298.
KHNP, Guideline for Finite Element Welding Residual Stress Analysis of Dissimilar Weld in Nuclear Power Plants, 2012.
Kim, Jong-Sung, et al., 2015, "Investigation of the effects of geometric variables on the residual stresses and PWSCC growth in the RPV BMI penetration Nozzles," J. of Mechanical Science and Technology, Vol. 29, No. 3, pp. 1049-1064.
EPRI, TR-1009378, Material Reliability Program: Welding Residual and Operating Stresses in PWR Alloy 182 Butt Welds, (MRP-106), 2004.
EPRI, NP-4690-SR, Evaluation of Flaws in Austenitic Steel Piping, 1986.
EPRI, TR-1015400, Material Reliability Program: Advanced FEA Evaluation of Growth of Postulated Cir- cumferential PWSCC Flaws in Pressurizer Nozzle Dissimilar Metal Welds, (MRP-215), Rev.1, 2007.
EPRI, TR-1021014, Material Reliability Program: Technical Basis for Preemptive Weld Overlays for Alloy 82/182 Butt Welds in Pressurized Water Reactors (PWRs), (MRP-169), Rev.1-A, 2010.
UNRC, NUREG/CR-6837, The Battelle Integrity of Nuclear Piping (BINP), 2005.
$EMC^2$ , Implication of Wolf Creek Indications - Final Report, 2007.
PVRC JIP Phase II, Prediction of Residual Stresses Effects of Welding, PWHT, Local PWHT, and Alternative Stress Improvement Techniques, 2007.
EU, SINTAP: Structural Integrity Assessment Procedures for European Industry, 1998.
British Energy, R6: Assessment of the Integrity of Structures Containing Defects, Rev.4, 2001.
API and ASME, API 579/ASME FFS-1: Recommended Practice for Fitness for Service, 2008.
ASTM, E837-08e2, Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method.
ASTM, E2860-12, Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels.
Withers, P.J. and Bhadeshia, H.K.D.H, 2001, "Overview residual stress part 1 - measurement techniques," Material Science and Technology, Vol. 17, pp. 355-365.
http://www.veqter.co.uk/residual-stress-measurement
The Open Univeristy, 2011, Application of the Contour Method to Validate Residual Stress Predictions, Open Research Online.
Ueda, Y. and Yuan, M.G., 1992, "The characteristics of the source of welding residual stress (inherent strain) and its application to measurement and prediction," in Mechanical Effects of Welding, Springer, pp.105-121.
EPRI, TR-103696, PWSCC of Alloy 600 Materials in PWR Primary System Penetrations, 1994.
EPRI, PWSCC of Alloy 600 Materials in PWR Primary System Penetrations, EPRI TR-103696, 1994.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.