최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Nuclear engineering and technology : an international journal of the Korean Nuclear Society, v.48 no.4, 2016년, pp.1009 - 1014
Jung, Yang-Il (LWR Fuel Technology Division, Korea Atomic Energy Research Institute) , Park, Jung-Hwan (LWR Fuel Technology Division, Korea Atomic Energy Research Institute) , Kim, Hyun-Gil (LWR Fuel Technology Division, Korea Atomic Energy Research Institute) , Park, Dong-Jun (LWR Fuel Technology Division, Korea Atomic Energy Research Institute) , Park, Jeong-Yong (LWR Fuel Technology Division, Korea Atomic Energy Research Institute) , Kim, Weon-Ju (LWR Fuel Technology Division, Korea Atomic Energy Research Institute)
SiC-based ceramic composites are currently being considered for use in fuel cladding tubes in light-water reactors. The joining of SiC ceramics in a hermetic seal is required for the development of ceramic-based fuel cladding tubes. In this study, SiC monoliths were diffusion bonded using a Ti foil ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Prog. Nucl. Energy Hallstadius 57 71 2012 10.1016/j.pnucene.2011.10.008 Cladding for high performance fuel
J. Nucl. Mater. Kim 458 29 2015 10.1016/j.jnucmat.2014.11.117 Fabrication and measurement of hoop strength of SiC triplex tube for nuclear fuel cladding applications
J. Eur. Ceram. Soc. Fernandez 20 2641 2000 10.1016/S0955-2219(00)00156-4 Interfacial and thermomechanical characterization of reaction formed joints in silicon carbide-based materials
J. Mater. Sci. Colombo 33 2405 1998 10.1023/A:1004312109836 Joining of reaction-bonded silicon carbide using a preceramic polymer
J. Mater. Sci. Morozumi 20 3976 1985 10.1007/BF00552387 Bonding mechanism between silicon carbide and thin foils of reactive metals
Cockeram 1999 The diffusion bonding of silicon carbide and boron carbide using refractory metals, USDOE Contract No. DE-AC11-98PN38206
Int. J. Appl. Ceram. Technol. Halbig 9 677 2012 10.1111/j.1744-7402.2012.02766.x Integration technologies for silicon carbide-based ceramics for micro-electro-mechanical systems-lean direct injector fuel injector applications
J. Nucl. Mater. Jung 441 510 2013 10.1016/j.jnucmat.2013.07.008 Microstructures of diffusion bonded SiC ceramics using Ti and Mo interlayers
J. Nucl. Mater. Jung 455 586 2014 10.1016/j.jnucmat.2014.08.014 Microstructures of laser bonded SiC ceramics with Zr interlayers
J. Eur. Ceram. Soc. Grasso 34 1681 2014 10.1016/j.jeurceramsoc.2013.12.023 Joining of b-SiC by spark plasma sintering
Ceram. Eng. Sci. Proc. Hinoki 26 399 2005 10.1002/9780470291221.ch47 Development of joining and coating technique for SiC and SiC/SiC composites utilizing NITE processing
Nucl. Eng. Des. Lippmann 231 151 2004 10.1016/j.nucengdes.2004.03.002 Laser joining of silicon carbide-a new technology for ultra-high temperature resistant joints
J. Nucl. Mater. Ferraris 417 379 2011 10.1016/j.jnucmat.2010.12.160 Joining of SiC-based materials for nuclear energy applications
J. Nucl. Mater. Henager 367-370 1139 2007 10.1016/j.jnucmat.2007.03.189 Coatings and joining for SiC and SiC-composites for nuclear energy systems
J. Nucl. Mater. Zhou 466 322 2015 10.1016/j.jnucmat.2015.08.004 Fast joining SiC ceramics with Ti3SiC2 tape film by electric field-assisted sintering technology
J. Nucl. Mater. Riccardi 329-333 562 2004 10.1016/j.jnucmat.2004.04.118 Issues of low activation brazing of SiCf/SiC composites by using alloys without free silicon
Nucl. Eng. Des. Herrmann 2016 10.1016/j.nucengdes.2015.12.022 Joining technology-a challenge for the use of SiC components in HTRs
J. Nucl. Mater. Katoh 448 497 2014 10.1016/j.jnucmat.2013.10.002 Radiation-tolerant joining technologies for silicon carbide ceramics
J. Eur. Ceram. Soc. Li 20 227 2000 10.1016/S0955-2219(99)00157-0 Microstructure and mechanical properties of in situ produced SiC/TiSi2 nanocomposites
J. Eur. Ceram. Soc. Jung 36 1343 2016 10.1016/j.jeurceramsoc.2016.01.015 Effect of TiSi2/Ti3SiC2 matrix phases in a reaction-bonded SiC on mechanical and high-temperature oxidation properties
J. Nucl. Mater. Henager 466 253 2015 10.1016/j.jnucmat.2015.07.044 Modeling and testing miniature torsion specimens for SiC joining development studies for fusion
※ AI-Helper는 부적절한 답변을 할 수 있습니다.