$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

초록이 없습니다.

AI 본문요약
AI-Helper 아이콘 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

문제 정의

  • 본 고에서는 향후 ‘‘Zero-power’’ IoT 구현을 위한 중요한 기술 중 하나인 에너지 하베스팅 기술에 대한 최신 기술동향을 기술하였다.
  • 9 μV의 출력을 얻었다[30]. 이러한 연구는 작은 전력이지만 MEMS 기술과 결합된 에너지 하베스터 솔루션을 제공한다. 미국 미시건 대학 연구팀은 캘리포니아주에 있는 약 1 km 길이의 교량에서 거동이 가장 심한 위치에 전자기 에너지 하베스팅 모듈을 부착하여 전력 생성량에 대한 Feasibility 분석을 하였다[31].
본문요약 정보가 도움이 되었나요?

질의응답

핵심어 질문 논문에서 추출한 답변
에너지 하베스팅 기술은 무엇으로 구성되는가? ① 에너지 습득 소자 및 트랜스듀스(솔라 셀, 압전 소자, 열전 소자, 안테나 등) ② 에너지 변환 장치(정류기 및 DC-DC 변환기) ③ 에너지 저장 장치(배터리 또는 슈퍼 커패시터) ④ 능동 및 수동 회로 토폴로지, 전력 관리 모듈 ⑤ 저전력 통신 및 제어 프로토콜 ⑥ 센서를 포함한 디바이스 상호간 연결 및 패키징 설비를 포함하는 시스템 통합
에너지 하베스팅 기술의 역할은? 에너지 하베스팅 기술은 ‘‘Zero-power’’ IoT 구현을 위한 중요한 기술로서 웨어러블 디바이스의 수명과 자동화 동작 시간을 연장하는 기능을 제공하고, 궁극적으로는 주변의 에너지(빛, 열, 바람, 기계적 진동, 전자파 에너지 등)를 활용함으로써 환경보호에 기여할 수 있다. 에너지 하베스팅 기술은 자체기술뿐만 아니라, 웨어러블 디바이스의 전력 관리 및 네트워크 기술과 연계하여 운영되어야 하고, 응용 분야와 사용되는 환경에 따라 적합한 방식을 선택해야 한다.
에너지 하베스팅 기술에 필요 조건은? 에너지 하베스팅 기술은 ‘‘Zero-power’’ IoT 구현을 위한 중요한 기술로서 웨어러블 디바이스의 수명과 자동화 동작 시간을 연장하는 기능을 제공하고, 궁극적으로는 주변의 에너지(빛, 열, 바람, 기계적 진동, 전자파 에너지 등)를 활용함으로써 환경보호에 기여할 수 있다. 에너지 하베스팅 기술은 자체기술뿐만 아니라, 웨어러블 디바이스의 전력 관리 및 네트워크 기술과 연계하여 운영되어야 하고, 응용 분야와 사용되는 환경에 따라 적합한 방식을 선택해야 한다.
질의응답 정보가 도움이 되었나요?

참고문헌 (47)

  1. R. V. Prasad, S. Devasenapathy, V. S. Rao, and J. Vazifehdan, "Reincarnation in the ambiance: Devices and networks with energy harvesting", IEEE Communications Surveys & Tutorials, vol. 16, no. 1, First Quarter, 2014. 

  2. S. K. Kim, R. Vyas, J. Bito, K. Niotaki, A. Collado, A. Georgiadis, and M. M. Tentzeris, "Ambient RF energyharvesting technologies for self-sustainable standalone wireless sensor platforms", Proceedings of the IEEE, vol. 102, no. 11, Nov. 2014. 

  3. Crossbow Technology Inc. (California), "MPR-MIB Users Manual", Crossbow Resources, Revision A, 2007. 

  4. F. Yildiz, "Potential ambient energy-harvesting sources and techniques", Journal of Technology Studies, vol. 35, no. 1. 2009. 

  5. G. Zhou, L. Huang, W. Li, and Z. Zhu, "Harvesting ambient environmental energy for wireless sensor networks: A survey", Hindawi Publishing Corporation Journal of Sensors, vol. 2014. 

  6. P. Jaffe, J. McSpadden, "Energy conversion and transmission modules for space solar power", Proc. IEEE, vol. 101, no. 6, pp. 1424-1437, Jun. 2013. 

  7. A. Collado, A. Georgiadis, "Conformal hybrid solar and electromagnetic (EM) energy harvesting rectenna", IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 60, no. 8, pp. 2225-2234, Aug. 2013. 

  8. M. Danesh, J. R. Long, "Photovoltaic antennas for autonomous wireless systems", IEEE Trans. Circuits Syst. II, Exp. Briefs, vol. 58, no. 12, pp. 807-811, Nov. 2011. 

  9. G. Mahan, B. Sales, and J. Sharp, "Thermoelectric materials: New approaches to an old problem", Phys. Today, vol. 50, no. 3, pp. 42-47, Mar. 1997. 

  10. M. Pinuela, P. D. Mitcheson, and S. Lucyszyn, "Ambient RF energy harvesting in urban and semi-urban environment", IEEE Trans. Microw. Theory Tech., vol. 61, no. 7, pp. 2715-2726, Jul. 2013. 

  11. H. S. Kim, J. -H. Kim, and J. Kim, "A review of piezoelectric energy harvesting based on vibration", Int. J. Precision Eng. Manuf., vol. 12, no. 6, pp. 1129-1141, Dec. 2011. 

  12. S. Roundy, P. K. Wright, and J. Rabaey, "A study of low level vibrations as a power source for wireless sensor nodes", Comput. Commun., vol. 26, no. 11, pp. 1131-1144, Jul. 2003. 

  13. G. Orecchini, L. Yang, M. M. Tentzeris, and L. Roselli, "Wearable battery-free active paper printed RFID tag with human-energy scavenger", in IEEE MTT-S Int. Microw. Symp. Dig., Baltimore, MD, USA, Jun. 2011. 

  14. M. A. Green, K. Emery, Y. Hishikawa, W. Warta, and E. D. Dunlop, "Solar cell efficiency tables (version 48)", Progress in Photovoltaics: Research and Applications, vol. 24, no. 7, pp. 905-913, Jun. 2016. 

  15. NREL homepage. Available http://www.nrel.gov/ncpv/images/efficiency_chart.jpg 

  16. T. Esram, P. L. Chapman, "Comparison of photovoltaic array maximum power point tracking techniques", IEEE Trans. Energy Convers., vol. 22, no. 2, pp. 439-449, Jun. 2007. 

  17. A. Collado, A. Georgiadis, "Conformal hybrid solar and electromagnetic (EM) energy harvesting rectenna", IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 60, no. 8, pp. 2225-2234, Aug. 2013. 

  18. M. Danesh, J. R. Long, "Photovoltaic antennas for autonomous wireless systems", IEEE Trans. Circuits Syst. II, Exp. Briefs, vol. 58, no. 12, pp. 807-811, Nov. 2011. 

  19. Sumpower homepage. Available: http://us.sunpower.com 

  20. Powerfilm homepage. Available http://www.powerfilm solar.com 

  21. T. A. Carstens, M. L. Corradini, J. P. Blanchard, and Z. Ma, "Thermoelectric powered wireless sensors for spent fuel monitoring", IEEE Transactions on Nuclear Science, vol. 59, no. 4, pp. 1408-1413, Aug. 2012. 

  22. C. D. Stokes, A. Duff, M. J. Mantini, B. A. Grant, and R. Venkatasubramanian, "Nanostructured thermoelectric material and device technology for energy harvesting applications", in Proceedings of the 4th IEEE Nanotechnology Materials and Devices Conference (NMDC '10), pp. 154-159, Oct. 2010. 

  23. IDTechEx, "Thermoelectric Energy Harvesting: Devices, Applications & Opportunities 2012-2022", p. 55, 2012. 

  24. Microplet homepage. Available: http://www.micropelt.com/downloads/datasheet_mpg_d655.pdf 

  25. S. Roundy, P. K. Wright, and J. Rabaey, "A study of low level vibrations as a power source for wireless sensor nodes", Computer Communications, vol. 26, no. 11, pp. 1131-1144, Jul. 2003. 

  26. H. S. Kim, J. H. Kim, and J. Kim, "A review of piezoelectric energy harvesting based on vibration", Int. J. Precision Eng. Manuf., vol. 12, no. 6, pp. 1129-1141, Dec. 2011. 

  27. G. Orecchini, L. Yang, M. M. Tentzeris, and L. Roselli, "Wearable battery-free active paper printed RFID tag with human-energy scavenger", in IEEE MTT-S Int. Microw. Symp. Dig., Baltimore, MD, USA, Jun. 2011. 

  28. MIDE homepage, Available: http://www.mide.com 

  29. A. Rahimi, O. Zorlu, A. Muhtaroglu, and H. Kulah, "A vibration-based electromagnetic energy harvester system with highly efficient interface electronics", in Proceedings of the 16th International Solid-State Sensors, Actuators and Microsystems Conference, pp. 2650-2653, Jun. 2011. 

  30. K. Tao, G. Ding, P. Wang, Z. Yang, and Y. Wang, "Fully integrated micro electromagnetic vibration energy harvesters with micro-patterning of bonded magnets", in Proceedings of the IEEE 25th International Conference on Micro Electro Mechanical Systems, pp. 1237-1240, Feb. 2012. 

  31. T. V. Galchev, J. McCullagh, R. L. Peterson, and K. Najafi, "Harvesting traffic-induced vibrations for structural health monitoring of bridges", Journal of Micromechanics and Microengineering, no. 21, pp. 1-13, 2011. 

  32. L. Li, Y. Zhang, H. San, Y. I. Guo, and X. Chen, "MEMS for vibration energy harvesting", in MEMS/MOEMS Technologies and Applications III, Proceedings of the SPIE, vol. 6836, Mar. 2008. 

  33. Y. Li, H. Yu, B. Su, and Y. Shang, "Hybrid micropower source for wireless sensor network", IEEE Sensors Journal, vol. 8, no. 6, pp. 678-681, Jun. 2008. 

  34. G. D. Pasquale, A. Soma, "Investigations on energy scavenging methods using MEMS devices", in Proceedings of the International Semiconductor Conference, vol. 1, pp. 163-166, Oct. 2008. 

  35. G. Altena, D. Hohlfeld, R. Elfrink, M. H. Goedbloed, and R. Van Schaijk, "Design, modeling, fabrication and characterization of an electret-based MEMS electrostatic energy harvester", in Proceedings of the 16th International Solid-State Sensors, Actuators and Microsystems Conference, pp. 739-742, Jun. 2011. 

  36. E. Halvorsen, E. R. Westby, and S. Husa, "An electrostatic energy harvester with electret bias", in Proceedings of the International Solid-State Sensors, Actuators and Microsystems Conference, pp. 1381-1384, Jun. 2009. 

  37. F. Fan, Z. Tian, and Z. L. Wang, "Flexible triboelectric generator", Nano Energy, Jan. 2012. 

  38. Z. L. Wang, "Triboelectric nanogenerators as new energy technology for self-powered systems and as active mechanical and chemical sensors", ACS Nano, vol. 7, no. 11, pp 9533-9557, Sep. 2013. 

  39. S. Wang, X. Mu, Y. Yang, C. Sun, A. Y. Gu, and Z. L. Wang, "Flow-driven triboelectric generator for directly powering a wireless sensor node", Advanced Materials, vol. 27, no. 2, pp. 240-248, Nov. 2014. 

  40. R. Shigeta et al., "Ambient RF energy harvesting sensor device with capacitor-leakage-aware duty cycle control", IEEE Sensors J., vol. 13, no. 8, pp. 2973-2983, Aug. 2013. 

  41. A. P. Sample, D. J. Yeager, P. S. Powledge, A. V. Mamishev, and J. R. Smith, "Design of an RFID-based batteryfree programmable sensing platform", IEEE Trans. Instrum. Meas., vol. 57, no. 11, pp. 2608-2615, Nov. 2008. 

  42. D. D. Donno, L. Catarinucci, and L. Tarricone, "An UHF RFID energy-harvesting system enhanced by a DC-DC charge pump in silicon-on-insulator technology", IEEE Microw. Wireless Compon. Lett., vol. 23, no. 6, pp. 315-317, Jun. 2013. 

  43. A. Dolgov, R. Zane, and Z. Popovic, "Power management system for online low power RF energy harvesting optimization", IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 57, no. 7, pp. 1802-1811, Jul. 2010. 

  44. D. Masotti, A. Costanzo, M. D. Preta, and V. Rizzoli, "Genetic-based design of a teta-band high-efficiency radio-frequency energy harvesting system", IET Microw. Antennas Propag., vol. 7, no. 15, pp. 1254-1263, Dec. 2013. 

  45. M. Pinuela, P. D. Mitcheson, and S. Lucyszyn, "Ambient RF energy harvesting in urban and semi-urban environment", IEEE Trans. Microw. Theory Tech., vol. 61, no. 7, pp. 2715-2726, Jul. 2013. 

  46. T. Ajmal, V. Dyo, B. Allen, D. Jazani, and I. Ivanov, "Design and optimisation of compact RF energy harvesting device for mart applications", Electron. Lett., vol. 50, no. 2, pp. 111-113, Jan. 2014. 

  47. R. J. Vyas, B. S. Cook, Y. Kawahara, and M. M. Tentzeris, "E-WEHP: A batteryless embedded sensor-platform wirelessly powered from ambient digital-TV signals", IEEE Trans. Microw. Theory Tech., vol. 61, no. 6, pp. 2491-2505, Jun. 2013. 

저자의 다른 논문 :

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로