최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국산학기술학회논문지 = Journal of the Korea Academia-Industrial cooperation Society, v.17 no.9, 2016년, pp.709 - 717
In this study, the convenience and efficiency of vision-based displacement measurement (VBDM) to estimate the cable tension of cable-stayed bridges and the requirements for its effective application were examined. To demonstrate its convenience and efficiency, it was confirmed that VBDM can be accom...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
케이블 장력 추정 기법은 어떻게 구분되는가? | 케이블 장력 추정 기법으로 사용되는 방법은 보통 직접법과 간접법으로 구분할 수 있다[3-7]. 직접법은 통상교량에 장착된 로드셀이나 광섬유 센서 등을 이용하여 케이블에 가해지는 장력을 직접적으로 확인하는 방법을 말한다[4]. | |
직접법의 단점은 무엇인가? | 직접법은 통상교량에 장착된 로드셀이나 광섬유 센서 등을 이용하여 케이블에 가해지는 장력을 직접적으로 확인하는 방법을 말한다[4]. 통상 장력을 직접 측정하는 계측기들은 시공시 미리 설치해야 하므로 초기 비용이 들고 유지관리의문제가 있을 수 있다. 간접법에 해당되는 방법으로는 교량의 케이블에서 진동을 계측하여 역으로 장력을 추정하는 진동법이 있다[4-7]. | |
직접법이란 무엇인가? | 케이블 장력 추정 기법으로 사용되는 방법은 보통 직접법과 간접법으로 구분할 수 있다[3-7]. 직접법은 통상교량에 장착된 로드셀이나 광섬유 센서 등을 이용하여 케이블에 가해지는 장력을 직접적으로 확인하는 방법을 말한다[4]. 통상 장력을 직접 측정하는 계측기들은 시공시 미리 설치해야 하므로 초기 비용이 들고 유지관리의문제가 있을 수 있다. |
A. Deraemaeker, E. Reynders, G. De. Roeck, and J. Kullaa, "Vibration-based structural health monitoring using output-only measurements under changing environment", Mechanical Systems and Signal Processing, Elsevier, vol. 22, no. 1, pp. 34-56, 2008. DOI: http://dx.doi.org/10.1016/j.ymssp.2007.07.004
Ja Geul Yun, Jin Son, Seung-Pi Jang, "A Study on Tension Measurement for Cable-Supported Bridge", Proc. of the KSCE Conf., KSCE, pp. 117-120, 1999.
T. Shimada, A Study on the Maintenance and Management fo the Tension Measurment for the Cable of Bridge, Ph Dissertation, Kobe University, 1995.
H. Zui, T. Shinke and Y. Namita, Practical Formulas for Estimation of Cable Tension by Vibration Method. ASCE Journal of SE, vol. 122, no. 6, pp. 651-656, 1996. DOI: http://dx.doi.org/10.1061/(ASCE)0733-9445(1996)122:6(651)
Hae-Won Park, Bong-Young Ahn Seung-Seok, Lee, Jong-Woo Kim, "Development of Magnetic Sensor for Measurement of the Cable Tension of Large Scale Bridge", Journal of the KSNT, vol. 27, no. 4, pp. 339-344, 2007.
Jinsuk Im, Ming L. Wang, Sung Woo Shin, Chung-Bang Yun, Hyung-Jo Jung, Jeong-Tae Kim, Seung-Hyun Eem, "Field application of elasto-magnetic stress sensors for monitoring of cable tension force in cable-stayed bridges", Smart structures and systems, Techno Press, vol. 12, no. 3, pp. 465-482, 2013.
Gyungmin Toh, Dongki Min, Junhong Park, "The study of method for measuring tension of cable by using ultrasonic wave", Proc. of the KSME Conf., KSME, pp. 2817-2818, 2015.
Soojin Jo, Hongki Cho, Shinae Jang, Jongwoong Park, Hyung-Jo Jung, Chung-Bang Yun, Billie F. Jr. Spencer, Ju-Won Seo, "Structural health monitoring of a cable-stayed bridge using wireless smart sensor technology: data analyses", Smart structures and systems, Techno Press, vol. 6 no. 5, pp. 461-480, 2010.
Jong-Jae Lee, Jong-Woong Park, Young-Soo Park, Hyung-Jo Jung, Jae-Min Kim, Ki-Sung Kim, "Remote Displacement Measurement of a Bridge Using Image Processing Techniques", Proc. of the KSNVE Spring Conf., KSNVE, pp. 316-317, 2009.
Sung-Wan Kim, Nam-Sik Kim, "Verification of Multi-point Displacement Response Measurement Algorithm Using Image Processing Technique ", Journal of the KSCE, KSCE, vol. 30, no. 3A, pp. 297-307, 2010.
D. J. Ewins, Modal Testing: Theory, Practice and Application, 2nd Edition, Research Press Ltd, pp. 86-188, 2000.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.