최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국동력기계공학회지 = Journal of the korean society for power system engineering, v.20 no.5, 2016년, pp.14 - 19
김부안 (부경대학교 재료공학과) , 황현영 (부경대학교 기계공학학연협동과정) , 강석준 (부경대학교 기계공학학연협동과정) , 문창권 (부경대학교 재료공학과)
This study is about the effect of nitrogen gas pressures during manufacturing process on the mechanical properties of composite materials.
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
티타니아는 어떻게 사용되는가? | 티타니아는 주로 투명 디스플레이, 능동형 유기 발광 다이오드, 태양전지 필름, 박막 트랜지스터로 사용되고 있을 뿐만 아니라 티타니아 분말의 적당한 분산은 에폭시 수지의 인장강도 등의 기계적 성질과 함께 열적성질 및 마찰저항도 향상 시키는 특성을 가지고 있다. | |
에폭시 수지는 어떤 특성을 가지는가? | 에폭시 수지(epoxy resin)는 복합재료(polymer composites)의 제조에 있어서 매트릭스로 사용되는 중요한 열경화성 고분자 재료로서 내화학적 특성, 전기 절연적 특성 그리고 인장강도와 같은 기계적 특성이 매우 우수할 뿐 아니라 그 접착성질도 상당히 뛰어나다. 또한 열에 대해 안정성도가지고 있으므로 접착제, 코팅제, 전기 전자재료및 성형 재료 등으로 널리 사용되고 있다.1) | |
에폭시 수지가 가지는 결점은 무엇인가? | 이 밖에 내약품성 전기 절연성이 특히 우수하다. 결점으로는 가용성이 없고 황색으로 착색되어 있으며 열 경화 온도가 비교적 높지 않고, 내자외선이 약간 떨어진다는 점이다. 경화제는 고온경화제인 methyl nadic anhydride (MNA) [KBH-1085, 국도화학(주)]을 사용하였다. |
J. Y. Choi, 2010, "Study on $TiO_2$ Nano Particles", Pukyong National University Material Engineering.
C. Amit and S. I. Muhammad, 2008, "Fabrication and Characterization of TiO2-epoxy Nanocomposites", Materials science and Engineering A, Vol. 487, pp. 574-585.
J. Jordan, K. I. Jacob, R. Tannenbaum, M. A. Sharaf and I. Jasiuk, 2005, "Experimental Trends in Polymer Nanocomposites-a", Review. Materials Science and Engineering A, Vol. 393, pp. 1-11.
G. J. Papakonstantopoulos, K. Yoshimoto, M. Doxastakis, P. F. Nealey and J. J. Pablo, 2005. "Local Mechanical Properties of Polymeric Nanocomposites", Physical review E, Vol. 72, No. 3, 091801.
M. Hussain, A. Nakahira, S. Nishijima and K. Niihara, 1996, "Fracture Behavior and Fracture Toughness of Particulate Filled Epoxy Composites", Materials Letters, Vol. 27, pp. 21-25.
G. Sui, W. H. Zhong, M. C. Liu, and P. H. Wu, 2009, "Enhancing Mechanical Properties of an Epoxy Resin using Liquid Nanoreinforcements", Materials Scence and Engineering A, Vol. 512, pp. 139-142.
C. K. Moon and B. A. Kim, 2015, "Nanoparticle effect on the mechanical properties of polymer composites", Journal of the Korea Society For Power System Engineering, Vol. 19, No. 5, pp. 12-16.
Y. J. Moon, J. Y. Choi, B. A. Kim and C. K. Moon, 2010, "Effect of $TiO_2$ nanoparticle on the mechanical and thermal properties of epoxy resin composites, Journal of the Korea Society For Power System Engineering, Vol. 14, No. 4, pp. 68-75.
M. Gasko, and G. Rosenberg, 2011, "Correlation between Hardness and Tensile Properties in Ultra-high Strength Dual Phase Steels", Materials Engineering, Vol. 18, pp. 155-159.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.