최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기전기학회논문지 = The Transactions of the Korean Institute of Electrical Engineers, v.65 no.11, 2016년, pp.1937 - 1942
최명일 (Electrical Safety Research Institute, Korea Electrical Safety Co.) , 김재진 (Electrical Safety Research Institute, Korea Electrical Safety Co.) , 한가람 (Electrical Safety Research Institute, Korea Electrical Safety Co.) , 전정채 (Electrical Safety Research Institute, Korea Electrical Safety Co.) , 이현옥 (Korea Polytechnics Mokpo Campus)
Unlike oil immersed transformers, cast-resin transformers have the solid insulator 'epoxy resin' in sealed structure. Therefore, they reveal a lot of limitations in checking aging conditions and predicting an accident. This study analyzed the characteristics of Cast-resin transformers by the measure...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
몰드변압기의 유지보수를 위해 적용하고 있는 방법은 어떤 것들이 있는가? | 몰드변압기는 유입변압기 대비 유지보수를 위해 적용하고 있는 방법이 육안점검 및 열화상 카메라를 이용한 온도관리, 소음관리 등 극히 제한적인 항목으로 관리되고 있으며, 정밀진단으로는 몰드변압기의 부분방전 시험으로 열화여부를 판정하고 있다. 특히 활선상태에서 부분방전 시험에 의한 몰드변압기의 안전진단시 외부 잡음신호가 대량 유입시 이상유무를 판정하는데 많은 문제점이 도출되고 있다. | |
몰드변압기의 교체주기는 몇 년인가? | 9 kV 이하 자가용 수전설비의 200,000개소 이상에서 사용하고 있는 것으로 추정된다. 몰드변압기의 교체주기는 일본전기공업협회(JEMA)에서 평균 수명을 15~20년으로 발표하였다. | |
국내외에서 몰드변압기의 안전진단기술에 대해 어떠한 연구가 수행되었는가? | 국내외에서 몰드변압기의 진단기술 연구동향으로는 AE(Acoustic Emission) 센서나 용량성 프로브를 이용하여 실험실 조건에서 몰드변압기 열화상태를 측정하고 검출기법을 제시하는 연구가 수행되었으며, 현장에서 이러한 연구결과를 적용하기에는 아직은 많은 어려움이 있다. 따라서 몰드변압기의 절연열화 진단을 위해서 상호보완적인 측정방법이 필요하고, 몰드변압기의 절연 상태의 유무를 판정할 수 있는 분석방법을 개발하는 것이 매우 중요하다. |
Kil-Mok Shong, Myung-Il Choi, Young-Seog Kim, Sun-Bae Bang, Chong-Min Kim, "A Study on the Comparison of the Vibration Data in Cast Resin Transformer According to the Load Type", KIIEE, V.26, No. 4, pp. 75-81, 2012.
KESCO, "A Study on the Expected Service Life of 22.9kv. Class Electrical Equipments", pp. 136-138, 2009.
KESCO, "The laser detection through the mounting reflector and the development of mold transformer vibration analysis system", pp. 14-17, 2012.
Soongsil University, "A Study o the Protection of the Risk & the Developmet of Monitoring System on the Mold Transformer", pp. 3-12, 1997.
Masaaki Kando, "Fault Detection Method with Antennas", IEEE Proceedings of the 5" International Conference on Properties and Applications of Dielectric Materials, Vol. 2, pp. 1140-1143, 1997.
Myeong-Il Choi, Jae-Chul Kim, "A Study on the Comparison of Denoising Performance of Stationary Wavelet Transform for Discharge Signal Data in Cast-resin Transformer, KIIEE, Vol. 28, No. 3, pp. 84-90, 2014.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.