최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국표면공학회지 = Journal of the Korean institute of surface engineering, v.50 no.6, 2017년, pp.460 - 464
유연우 (재료연구소 표면기술연구본부 플라즈마공정연구실) , 변응선 (재료연구소 표면기술연구본부 플라즈마공정연구실)
As increasing thermal efficiency of the gas turbine, the performance improvement of thermal barrier coatings is also becoming important. Ytrria stabilized zirconia(YSZ) is the most popular materials for ceramic top coating because of its low thermal conductivity. In order to enhance the performance ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
열차폐 코팅은 어떤 목적으로 사용되는가? | 열차폐 코팅은 발전용/항공용 가스터빈의 고온 부품, 로켓 엔진 연소기 고온 부품 등 고온의 환경에서 하부 금속 모재를 보호하는 용도로 사용되고 있으며, 세라믹 탑 코팅과 금속 본드 코팅으로 이루어져 있다. 세라믹 탑 코팅은 낮은 열전도도로 인해 모재에 가해지는 열부하를 경감하는 역할을 하며, 금속 본드 코팅은 세라믹 탑 코팅과 하부 금속모재의 열팽창 계수 차이로 인해 누적된 반복 열피로로 인한 박리 현상을 방지하는 역할을 한다. | |
Yttria stabilized zirconia (YSZ) 코팅이 열차폐 코팅의 탑 코팅 부분 소재로 널리 사용되고 있는 배경은 무엇인가? | 세라믹 탑 코팅은 낮은 열전도도로 인해 모재에 가해지는 열부하를 경감하는 역할을 하며, 금속 본드 코팅은 세라믹 탑 코팅과 하부 금속모재의 열팽창 계수 차이로 인해 누적된 반복 열피로로 인한 박리 현상을 방지하는 역할을 한다. Yttria stabilized zirconia(YSZ)는 낮은 열전도도와 높은 상안정성의 장점으로 인해 열차폐 코팅의 탑 코팅 부분 소재로 널리 사용되고 있다. YSZ 코팅을 형성하기 위해 대기 플라즈마 용사(atmospheric plasma spraying, APS), 전자빔 물리 기상 증착법(electron beam physical vapor deposition, EB-PVD) 등이 사용되고 있다[1-4]. | |
열차폐 코팅을 이루는 세라믹 탑 코팅과 금속 본드 코팅은 각각 어떤 역할을 하는가? | 열차폐 코팅은 발전용/항공용 가스터빈의 고온 부품, 로켓 엔진 연소기 고온 부품 등 고온의 환경에서 하부 금속 모재를 보호하는 용도로 사용되고 있으며, 세라믹 탑 코팅과 금속 본드 코팅으로 이루어져 있다. 세라믹 탑 코팅은 낮은 열전도도로 인해 모재에 가해지는 열부하를 경감하는 역할을 하며, 금속 본드 코팅은 세라믹 탑 코팅과 하부 금속모재의 열팽창 계수 차이로 인해 누적된 반복 열피로로 인한 박리 현상을 방지하는 역할을 한다. Yttria stabilized zirconia(YSZ)는 낮은 열전도도와 높은 상안정성의 장점으로 인해 열차폐 코팅의 탑 코팅 부분 소재로 널리 사용되고 있다. |
Haynes, J.A., Ferber, M.K., Porter, W.D., Rigney, E.D., Characterization of alumina scales formed during isothermal and cyclic oxidation of plasmasprayed TBC systems at $1150^{\circ}C$ , Oxidation of Metals, 52(1) (1999), 31-76.
Khan, A.N., Lu, J., Behavior of air plasma sprayed thermal barrier coatings, subject to intense thermal cycling, Surf. and Coat. Tech., 166 (1) (2003), 37-43.
Smialek, J.L., Compiled furnace cyclic lives of EB-PVD thermal barrier coatings, Surf. and Coat. Tech., 276 (2015), 31-38.
Sohn, Y.H., Kim, J.H., Jordan, E.H., Gell, M., Thermal cycling of EB-PVD/MCrAlY thermal barrier coatings: I. Microstructural development and spallation mechanisms, Surf. and Coat. Tech., 146- 147 (2001), 70-78.
Musalek, R., Bertolissi, G., Medricky, J., Kotlan, J., Pala, Z., Curry, N., Feasibility of suspension spraying of yttria-stabilized zirconia with waterstabilized plasma torch, Surf. and Coat. Tech., 268 (2015), 58-62.
Mahade, S., Curry, N., Bjorklund, S., Markocsan, N., Nylen, P., Thermal conductivity and thermal cyclic fatigue of multilayered Gd2Zr2O7/YSZ thermal barrier coatings processed by suspension plasma spray, Surf. and Coat. Tech., 283 (2015), 329-336.
M. V. Swain, L. F. Johnson, R. Syed, D. P. H. Hasselman, Thermal diffusivity, heat capacity and thermal conductivity of porous partially stabilized zirconia, J. Mater. Sci. Lett., 5(8) (1986), 799-802.
Bertrand, G., Bertrand, P., Roy, P., Rio, C., Mevrel, R., Low conductivity plasma sprayed thermal barrier coating using hollow psz spheres: Correlation between thermophysical properties and microstructure, Surf. and Coat. Tech., 202 (2008), 1994-2001.
D. Schwingel, R. Taylor, T. Haubold, J. Wigren, C. Gualco, Mechanical and thermophysical properties of thick PYSZ thermal barrier coatings: correlation with microstructure and spraying parameters, Surf. and Coat. Tech., 108-109 (1998), 99-106.
S. Sampath, Thermal Sprayed Ceramic Coatings: Fundamental Issues and Application Considerations, Int. J. Mater. Product Technol., 35(4) (2009), 425-448.
G. Antou, G. Montavon, F. Hlawka, A. Cornet, C. Coddet, and F.Machi, Evaluation of Modifications Induced on Pore Network and Structure of Partially Stabilized Zirconia Manufactured by Hybrid Plasma Spray Process, Surf. Coat. Tech., 180-81 (2004), 627-632.
C.A. Johnson, J.A. Ruud, R. Bruce, and D. Wortman, Relationships Between Residual Stress, Microstructure and Mechanical Properties of Electron Beam-Physical Vapor Deposition Thermal Barrier Coatings, Surf. Coat. Tech., 108-109 (1998), 80-85.
P. Bengtsson and T. Johannesson, Characterization of Micro-structural Defects in Plasma-Sprayed Thermal Barrier Coatings, J. Therm. Spray Tech., 4(3) (1995), 245-251.
Y. Tan, V. Srinviasan, T. Nakamura, S. Sampath, P. Bertrand and G. Bertrand, Optimizing Compliance and Thermal Conductivity of Plasma Sprayed Thermal Barrier Coatings via Controlled Powders and Processing Strategies, J. Therm. Spray Tech., 21(5) (2012), 950-962.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.