최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국표면공학회지 = Journal of the Korean institute of surface engineering, v.50 no.6, 2017년, pp.498 - 503
양예진 (목포해양대학교 기관시스템공학부) , 박일초 (목포해양대학교 기관시스템공학부) , 이정형 (목포해양대학교 기관시스템공학부) , 한민수 (목포해양대학교 기관시스템공학부) , 김성종 (목포해양대학교 기관시스템공학부)
The aim of the present study is to evaluate electrochemical corrosion characteristics of base metal and weldment of Al-Mg alloy in seawater solution. The specimen was 5mm thick 5083-H321 Al alloy plate which was butt-welded using gas metal arc welding (GMAW). To identify the types of inclusions in t...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
알루미늄은 용접 시 어떤 현상이 일어나는가? | Al-Mg 합금은 비강도와 내식성이 우수하며 가공성과 용접성이 양호하여 해양 환경에서 선체 및 구조용 재료로 많이 사용되고 있으나[1-3], 해수환경에 지속적으로 노출될 경우 염소이온에 의한 부동태 피막 파괴로 인해 공식 및 입계 부식 등에 의한 손상이 발생할 수 있다[1,4]. 알루미늄은 용접 시 가해지는 고열에 의해 미세조직에 변화가 발생하고, 팽창계수와 열전도도가 크기 때문에 용접 후 응고 시 열영향부(heat affected zone, HAZ)가 상대적으로 넓은 면적에 형성되고 열 변형에 의한 뒤틀림이 발생하며 재료 내에 잔류응력이 남는다. 또한 보호 가스가 재료 내에 용해될 수 있고, 이로 인해 기공 및 결함이 생성되면 용접부의 강도와 내식성은 크게 저하될 수 있다. | |
Al-Mg 합금의 특징은? | Al-Mg 합금은 비강도와 내식성이 우수하며 가공성과 용접성이 양호하여 해양 환경에서 선체 및 구조용 재료로 많이 사용되고 있으나[1-3], 해수환경에 지속적으로 노출될 경우 염소이온에 의한 부동태 피막 파괴로 인해 공식 및 입계 부식 등에 의한 손상이 발생할 수 있다[1,4]. 알루미늄은 용접 시 가해지는 고열에 의해 미세조직에 변화가 발생하고, 팽창계수와 열전도도가 크기 때문에 용접 후 응고 시 열영향부(heat affected zone, HAZ)가 상대적으로 넓은 면적에 형성되고 열 변형에 의한 뒤틀림이 발생하며 재료 내에 잔류응력이 남는다. | |
GMAW 용접 실시 후 용접부의 부식특성을 알아보기 위해 진행한 것은? | 따라서 본 연구에서는 알루미늄 선박건조 시 주로 이용되는 5083-H321을 대상으로 GMAW 용접을 실시하여 용접부의 부식특성을 관찰하였다. 이를 위해 전기화학적 부식 실험을 실시하였으며, 실험 전 후의 표면을 SEM과 EDS로 분석하여 용접에 따른 미세조직 및 개재물의 변화를 관찰하고 내식성 평가 및 부식 특성을 파악하였다. 이로써 본 연구가 향후 알루미늄 합금 용접기법 연구 시 내식성 평가를 위한 기초자료로 활용되기를 기대한다. |
G. Mathers, The welding of aluminium and its alloys, 1st ed. Woodhead publishing, 2002.
T. Anderson, New Developments in aluminum shipbuilding, Weld. J. 83 (2004) 28-30.
B.W. Tveiten, T. Moan, Mar. Struct. Determination of structural stress for fatigue assessment of welded aluminum ship details, 13 (2000) 189-212.
R. Rahamathullah, M.I.N. Isa, WBW Nik, The Effect of Concentration of Lawsonia inermis as a Corrosion Inhibitor for Aluminum Alloy in Seawater, 8521623 (2017).
B.Y. Moon, K.Y Lee, K.S. Kim, The Effect of Welding Conditions on Tensile Characteristics and Thermal Stress of Al 5083 Alloy Applied to Coenvironmental Leisure Ships, J Soc. Nav. Archit. Korea 40 (2014) 548-555.
E. Taban, E. Kaluc. Microstructural and mechanical properties of double-sided MIG, TIG and friction stir welded 5083-H321 aluminium alloy, Kovove Mater 44 (2006) 25-33.
J.S. Jesus, J.M. Costa, A. Loureiro, J.M. Ferreira, Fatigue strength improvement of GMAW T-welds in AA 5083 by friction-stir processing, Int. J. Fatigue 97 (2017) 124-134.
G.K. Padhy, C. S. Wu, S. Gao, Friction stir based welding and processing technologies-processes, parameters, microstructures and applications: A review, J. Mater. Sci. Technol. JMST-1119 (2017).
W. Mirihanage, N. Munasinghe, Modification of AA 5083 weld joint characteristics, International Symposium of Research Students on Materials Science and Engineering, 2004.
K.B. Lee, C. Kim, D.S. Kim, High deposition rate pulse gas metal arc welding for Al 5083 thick plate, Proc. Inst. Mech. Eng. Part B, 227 (2013) 848-854.
R.C. Calcraft, M.A. Wahab, D.M. Viano, G.O. Schumann, R.H. Phillips, N.U. Ahmed, The development of the welding procedures and fatigue of butt-welded structures of aluminium-AA5383, J. Mater. Process. Technol. 92 (1999) 60-65.
N. Sidhom, A. Laamouri, R. Fathallah, C. Braham, H.P. Lieurade, Fatigue strength improvement of 5083 H11 Al-alloy T-welded joints by shot peening: experimental characterization and predictive approach, Int. J. Fatigue 27 (2005) 729-745.
C. Vargel, Corrosion of Aluminium, 1st ed. Elsevier Ltd, 2004
A. Aballe, M. Bethencourt, F.J. Botana, M.J. Cano, M. Marcos, Influence of the cathodic intermetallics distribution on the reproducibility of the electrochemical measurements on AA5083 alloy in NaCl solutions, Corros. Sci. 45 (2003) 161-180.
K.A. Yasakau, M.L. Zheludkevich, S.V. Lamaka, M.G. Ferreira, Role of intermetallic phases in localized corrosion of AA5083, Electrochim. Acta, 52 (2007) 7651-7659.
M.M. Shtrikman, A.V. Pinskii, A.A. Filatov, V.V. Koshkin, E.A. Mezentseva, N.V. Guk, Methods for reducing weld porosity in argon-shielded arc welding of aluminium alloys, Welding Int. 25 (2011) 457-462.
D.A. Jones, Principles and Prevention of Corrosion, 2nd ed. Pearson, London, 1996
E. McCafferty, Sequence of steps in the pitting of aluminum by chloride ions, Corros. Sci. 45 (2003) 1421-1438.
R.T. Foley, Localized corrosion of aluminium alloys - A Review, 42 (1986) 277-288.
M. Yasuda, F. Weinberg, D. Tromans, Pitting Corrosion of Al and Al?Cu Single Crystals, 137 (1990) 3708-3715.
S.Y. Yu, P.M. Natishan, W.E. O'grady, Chloride uptake by the oxide films on single crystal and polycrystalline aluminum as determined using xray absorpton near edge structure, J. Electrochem. Soc. (2000) 158-166.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.