최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국주조공학회지 = Journal of Korea Foundry Society, v.37 no.6, 2017년, pp.186 - 192
김정민 (한밭대학교 신소재공학과) , 이재철 (한밭대학교 신소재공학과) , 최진영 (한밭대학교 신소재공학과) , 조재익 (한국생산기술연구원 서남지역본부) , 최경환 (한국생산기술연구원 뿌리산업기술연구소)
The lost foam casting method was used to fabricate Al-Si alloy thin sheet specimens; the effects of chemical composition and process variables on the mold filling and mechanical properties were investigated. The mold filling capability was observed to be proportional to the pouring temperature, and ...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
소실모형주조란 어떠한 방법인가? | 예를 들어, 박판형 알루미늄 주조제품을 소실모형주조법으로 건전하게 제조하는 것은 난이도가 있으며 주형 충전거동에 미치는 여러 공정변수들의 영향을 체계적으로 조사하여 정보를 축적 하는 것이 필요하다. 소실모형주조는 주입된 용탕이 모형을 분해하면서 주형을 충전하는 방법이기 때문에 다른 일반적인 중력 주조에 비해 상대적으로 충전이 어렵기 때문이다[4,5]. | |
소실모형주조공정의 장점은 무엇인가? | 최근 들어 자동차 부품산업 등에서 다시 많은 관심을 받고 있는 소실모형주조(Lost foam casting or evaporative pattern casting)공정은 복잡한 형상의 주조제품을 제조할 수 있고 주형 모래의 재활용이 용이할 뿐만 아니라 용탕의 주형충전과 정이 층류형태를 가지는 등 다른 주조공정에 비해 여러 우수한 점들을 가지고 있다[1-3]. 하지만 현재까지 소실모형주조법은 주로 주철제품의 제조에 적용되었고 알루미늄합금에 대한 관련 연구개발은 상대적으로 많이 부족한 상황이다. | |
소실모형주조법이 알루미늄합금에 적용하기 어려운 이유는 무엇인가? | 예를 들어, 박판형 알루미늄 주조제품을 소실모형주조법으로 건전하게 제조하는 것은 난이도가 있으며 주형 충전거동에 미치는 여러 공정변수들의 영향을 체계적으로 조사하여 정보를 축적 하는 것이 필요하다. 소실모형주조는 주입된 용탕이 모형을 분해하면서 주형을 충전하는 방법이기 때문에 다른 일반적인 중력 주조에 비해 상대적으로 충전이 어렵기 때문이다[4,5]. |
S. Kumar, P. Kumar and H.S. Shan, J. Mater. Process. Tech., "Optimization of tensile properties of evaporative pattern casting process through Taguchi's method", 204 (2008) 59-69.
S. Saghi, M. Divandari and Y.H.K. Kharrazi, Iranian J. Mater. Sci. Eng., "Flow behavior of molten metal in aluminum LFC process", 1 (2004) 39-46.
F. Sonnernberg, AFS Technical Publication, Lost foam casting made simple, American Foundry Society, Schaumburg, IL, USA (2008) 41-57, 173-200.
K. Siavashi, Ph.D. Thesis, Univ. of Birmingham, The effect of casting parameters on the fluidity and porosity of aluminum alloys in the lost foam casting process, (2011).
K.R. Ravi. R.M. Pillai, K.R. Amaranathan, B.C. Pai and M. Chakraborty, J. Alloys Compd., "Fluidity of aluminum alloys and composite: a review", 456 (2008) 201-201.
E.N. Pan and K.Y. Liao, AFS Trans., "Study on flowability of EPC A356 Al alloys", 106 (1998) 233-242.
L. Trumbulovic, Z. Acimovic, Z. Gulisija and L. Andric, Mater. Letters, "Correlation of technological parameters and quality of castings obtained by the EPC method", 58 (2004) 1726-1731.
H. Jafari, M.H. Idris and A. Shayganpour, Trans. Nonferrous Met. Soc. China, "Evaluation of significant manufacturing parameters in lost foam casting of thin-wall Al-Si-Cu alloy using full factorial design of experiment", 23 (2013) 2843-2851.
W. Abdul-Karem and K.F. Al-Raheem, Int. J. Eng. Sci. Tech., "Vibration improved the fluidity of aluminum alloys in thin wall investment casting", 3 (2011) 120-135.
M.D. Sabatino and L. Arnberg, Int. J. Cast Met. Res., "Effect of grain refinement and dissolved hydrogen on the fluidity of A356 alloy", 18 (2005) 181-186.
Kwon YD and Lee ZH, Mater. Sci. Eng. A, "The effect of grain refining and oxide inclusion on the fluidity of Al-4.5Cu-0.6Mn and A356 alloys", 360 (2003) 372-376.
M. Karimian, A. Ourdjini, M. H. Idris and H. Jafari, Trans. Nonferrous Met. Soc. China, "Effect of pattern coating thickness on characteristics of lost foam Al-Si-Cu alloy casting", 22 (2012) 2092-2097.
X.J. Liu, S.H. Bhavnani and R.A. Overfelt, J. Mater. Process. Tech., "Simulation of EPS foam decomposition in the lost foam casting process", 182 (2007) 333-342.
PANDAT. CompuTherm, LLC, Madison, WI, USA. Available online: http://www.computherm.com
K.T. Akhil, S. Arul and R. Sellamuthu, Procedia Mater. Sci., "The effect of section size on cooling rate, microstructure and mechanical properties of A356 aluminium alloy in casting", 5 (2014) 362-368.
S. Sun, B. Yuan and M. Liu, Trans. Nonferrous Met. Soc. China, "Effects of moulding sands and wall thickness on microstructure and mechanical properties of Sr-modified A356 aluminum casting alloy", 22 (2012) 1884-1890.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.