최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.34 no.2, 2017년, pp.77 - 81
최성우 (재료연구소 타이타늄연구실) , 박찬희 (재료연구소 타이타늄연구실) , 이상원 (재료연구소 타이타늄연구실) , 염종택 (재료연구소 타이타늄연구실) , 홍재근 (재료연구소 타이타늄연구실)
CP (Commercially Pure) titanium has been widely used in various industries such as in energy plants and bio-materials because of an excellent corrosion resistance and its non-toxicity to the human body. But there are limitations for usage as structural materials due to low strength. The tensile prop...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
순수 타이타늄의 장단점은 무엇인가? | 타이타늄합금은 뛰어난 고비강도, 내식성 및 생체적합성등의 우수한 특성으로 항공우주, 자동차부품, 열교환기, 군수용, 의료용 등 다양한 응용분야에서 적용이 확대되고 있다.1,2 그러나, 순수 타이타늄 (CP Titanium)의 경우에는 우수한 내식성 및 생체 적합성을 가지며 타이타늄합금에 비해 저가 (Low Cost) 소재임 에도 불구하고 타이타늄합금에 비해 낮은 강도로 인하여 응용분야에 제한이 있다. 일반적으로 타이타늄합금을 고강도화 하는 방법에는 고용강화, 석출강화, 분산강화, 가공경화, 결정립미세화 방법 등이 있다. | |
타이타늄합금의 특징은 무엇인가? | 타이타늄합금은 뛰어난 고비강도, 내식성 및 생체적합성등의 우수한 특성으로 항공우주, 자동차부품, 열교환기, 군수용, 의료용 등 다양한 응용분야에서 적용이 확대되고 있다.1,2 그러나, 순수 타이타늄 (CP Titanium)의 경우에는 우수한 내식성 및 생체 적합성을 가지며 타이타늄합금에 비해 저가 (Low Cost) 소재임 에도 불구하고 타이타늄합금에 비해 낮은 강도로 인하여 응용분야에 제한이 있다. | |
순수 타이타늄에 초미세결정립을 형성하기 위하여 많은 연구의 실정은 어떠한가? | 순수 타이타늄에 초미세결정립을 형성하기 위하여 많은 연구6-8 가 수행되어 왔으나, 강소성가공방법으로 제조되는 최종 소재의 크기에 한계가 있어 상용화 실적은 저조하다. 또한, 대부분의 연구가 판재/봉재 위주의 연구로 고강도 타이타늄 와이어 제조에 대한 연구결과는 미미하다. |
Lee, Y. T., "Titanium," Korea Metal Journal, 2009.
Srinivasan, N., Velmurugan, R., Kumar, R., Singh, S. K., and Pant, B., "Deformation Behavior of Commercially Pure (CP) Titanium under Equi-Biaxial Tension," Materials Science and Engineering: A, Vol. 674, pp. 540-551, 2016.
Azushima, A., Kopp, R., Korhonen, A., Yang, D., Micari, F., et al., “Severe Plastic Deformation (SPD) Processes for Metals,” CIRP Annals-Manufacturing Technology, Vol. 57, No. 2, pp. 716-735, 2008.
Meyers, M. A., Mishra, A., and Benson, D. J., “Mechanical Properties of Nanocrystalline Materials,” Progress in Materials Science, Vol. 51, No. 4, pp. 427-556, 2006.
Kumar, K., Van Swygenhoven, H., and Suresh, S., “Mechanical Behavior of Nanocrystalline Metals and Alloys,” Acta Materialia, Vol. 51, No. 19, pp. 5743-5774, 2003.
Dyakonov, G., Mironov, S., Zherebtsov, S., Malysheva, S., Salishchev, G., et al., "Grain-Structure Development in Heavily Cold-Rolled Alpha-Titanium," Materials Science and Engineering: A, Vol. 607, pp. 145-154, 2014.
Zherebtsov, S., Dyakonov, G., Salem, A., Malysheva, S., Salishchev, G., et al., “Evolution of Grain AND Subgrain Structure during Cold Rolling of Commercial-Purity Titanium,” Materials Science and Engineering: A, Vol. 528, No. 9, pp. 3474-3479, 2011.
Ko, Y. G., Shin, D. H., Park, K.-T., and Lee, C. S., “An Analysis of the Strain Hardening Behavior of Ultra-Fine Grain Pure Titanium,” Scripta Materialia, Vol. 54, No. 10, pp. 1785-1789, 2006.
Kobayashi, M., “The Present Situation of Cold Drawn Special Section,” Journal-Japan Society for Technology of Plasticity, Vol. 39, No. 447, pp. 335-337, 1998.
Avitzur, B., "Metal Forming: Processes and Analysis," Mcgraw-Hill, New York, 1968.
Sachs, G., "On the Theory of the Drawing Process (in German), Z. Angew," Mathematics U Mechanics, Vol. 7, pp. 235-236, 1927.
Siebel, E., "Die Formgebung im Bildsamen Zustande : Theoretische Grundlagen der Technischen Formgebungsverfahren," Dusseldorf Stahleisen, 1932.
Lange, K., "Handbook of Metal Forming," Mcgraw-Hill, p. 1216, 1985.
Kobayashi, M., "The Present Situation of Cold Drawn Special Section (in Japan)," Journal of the Japan Society for Technology of Plasticity, Vol. 39, No. 447, pp. 335-337. 1998.
Geleji, S., "Bildsame Formung der metalle in Rechnung und Versuch," Berlin, 1960.
Lee, T. K., "Development and Application of Shape Drawing Process Design Program Using Visual LISP," M.Sc. Thesis, Pusan National University, 2010.
Kim, N. and Kim, H. J., "Plastic Processing and Analysis," Munbook, 2002.
Lee, D. N., "Plastic Engineering," Munbook, 2005.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.