최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.34 no.3, 2017년, pp.185 - 189
김진우 (성균관대학교 대학원 기계공학과) , 김정섭 (성균관대학교 대학원 기계공학과) , 이상원 (성균관대학교 기계공학부)
Recently, titanium alloys have been widely used in aerospace, biomedical engineering, and military industries due to their high strength to weight ratio and corrosion resistance. However, it is well known that titanium alloys are difficult-to-cut materials because of a poor machinability characteris...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
티타늄 합금의 특징은? | 최근 항공, 우주, 의료 산업에서 티타늄 합금은 높은 강도, 내부식성 등의 우수한 기계적 성질로 인해 널리 사용되고 있지만 낮은 절삭성으로 인해 가공하기 어려운 난삭재로 분류되고 있다.1 | |
나노유체 MQL 가공 기술의 어떤 단점 때문에 액체질소 냉각 방식이 연구되고 있는가 | 그러나 이러한 절삭유 및 나노유체 사용만으로는 가공 시 발생하는 열을 냉각시키기 부족하기 때문에 액체질소(Liquid Nitrogen, LN2) 냉각을 이용하여 극저온 조건에서 가공하는 극저온 냉각 가공 기술 또한 활발하게 연구 중이다. Venugopal 등은 극저온 냉각 조건에서 티타늄 합금 선반 절삭가공 시 공구마모 감소효과를 확 인하였고7 Yap 등도 극저온 냉각 조건에서 탄소강의 선반 절삭가공 시 마찰계수 감소 및 칩 형상 개선 효과를 확인하였다. | |
티타늄 합금이 낙삭재로 분류되는 이유는? | 최근 항공, 우주, 의료 산업에서 티타늄 합금은 높은 강도, 내부식성 등의 우수한 기계적 성질로 인해 널리 사용되고 있지만 낮은 절삭성으로 인해 가공하기 어려운 난삭재로 분류되고 있다.1 |
Rahman, M., Zhi-Gang, W., and Yoke-San, W., “A Review on High-Speed Machining of Titanium Alloys,” International Journal Series C Mechanical Systems, Machine Elements and Manufacturing, Vol. 49, No. 1, pp. 11-20, 2006.
Greaves, I. A., Eisen, E. A., Smith, T. J., Pothier, L. J., Kriebel, D., et al., “Respiratory Health of Automobile Workers Exposed to Metal Working Fluid Aerosols: Respiratory Symptoms,” American Journal of Industrial Medicine, Vol. 32, No. 5, pp. 450-459, 1997.
Raynor, P. C., Cooper, S., and Leith, D., “Evaporation of Polydisperse Multicomponent Oil Droplets,” American Industrial Hygiene Association Journal, Vol. 57, No. 12, pp. 1128-1136, 1996.
Priarone, P. C., Robiglio, M., Settineri, L., and Tebaldo, V., "Milling and Turning of Titanium Aluminides by Using Minimum Quantity Lubrication," Procedia CIRP, Vol. 24, pp. 62-67, 2014.
Park, K.-H., Ewald, B., and Kwon, P. Y., "Effect of Nano-Enhanced Lubricant in Minimum Quantity Lubrication Balling Milling," Journal of Tribology, Vol. 133, No. 3, Paper No. 031803, 2011.
Venugopal, K., Paul, S., and Chattopadhyay, A., “Tool Wear in Cryogenic Turning of Ti-6Al-4V Alloy,” Cryogenics, Vol. 47, No. 1, pp. 12-18, 2007.
Yap, T., Sivaraos, C., and Leau, J., “Surface Roughness and Cutting Forces in Cryogenic Turning of Carbon Steel,” Journal of Engineering Science and Technology, Vol. 10, No. 7, pp. 911-920, 2015.
Pusavec, F., Hamdi, H., Kopac, J., and Jawahir, I., “Surface Integrity in Cryogenic Machining of Nickel Based Alloy-Nconel 718,” Journal of Materials Processing Technology, Vol. 211, No. 4, pp. 773-783, 2011.
Groover, M. P., "Fundamentals of Modern Manufacturing: Materials, Processes, and Systems," John Wiley & Sons, 5th Ed., 2010.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.