최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기열처리공학회지 = Journal of the Korean society for heat treatment, v.30 no.2, 2017년, pp.43 - 52
김홍기 (부산대학교 재료공학부) , 나혜성 (부산대학교 재료공학부) , 이상훈 (재료연구소) , 강정윤 (부산대학교 재료공학부)
Heat treatment condition for dissolution of the M23C6 carbides in 2.25Cr-1Mo-V-Ti material for thermal power plant tube was investigated using a dilatometer method. 2.25Cr-1Mo-V-Ti material was heat-treated at
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
T23/24 소재 사용이 제한되는 이유는? | 기존에 쓰고 있는 T22 소재도 용접부 CGHAZ에 재열균열이 발생한다고 보고되었으나 PWHT 온도를 700oC 이상 열처리시 RA(reduced of Area)의 향상으로 인해 재열 균열이 발생하지 않는다고 보고되어 있다[12-13]. 그러나 T23/24 소재의 경우는 PWHT를 700oC 이상 열처리를 수행하여도 재열 균열이 발생하는데 이는 PWHT를 700oC 이상 열처리 시 RA(20% at 700oC)가 T/P22의 RA(50% at 700oC) 만큼 향상되지 않는다[14]. 이러한 이유로 소재 사용이 제한을 받고 있다. | |
재열 균열의 발생원인은? | 재열 균열의 발생원인은 오스테나이트 결정립계에 불순물 원소가 편석이 되어 템퍼취성이 발생하거나 오스테나이트 결정립계에 과도한 석출물(M23C6)에 의해 입계가 입내보다 경하게 되어 결정립의 파괴시점이 되고 결정립에 있는 석출물 부근에 미세공동에 의해 결정립 내부 결함이 발생한다고 보고되고 있다[8-11]. 기존에 쓰고 있는 T22 소재도 용접부 CGHAZ에 재열균열이 발생한다고 보고되었으나 PWHT 온도를 700oC 이상 열처리시 RA(reduced of Area)의 향상으로 인해 재열 균열이 발생하지 않는다고 보고되어 있다[12-13]. | |
발전소 전력 효율을 향상시키는 이유는? | 최근 전 세계 화력발전 설비는 전력산업간의 가격경쟁심화와 환경규제등의 이유로 발전소 전력효율이 화두가 되고 있다[1]. 발전소 전력 효율이 상승할수록 가격 경쟁 향상과 환경문제에서 CO2 절감의 효과를 얻을 수 있기 때문이다[2]. 발전소 전력 효율을 향상시키기 위해선 증기조건 향상이 필수적이며 기존의 소재보다 더 높은 고온, 고압에 견딜 수 있는 소재도 필요하게 된다[3, 4]. |
IEA, World Energy Outlook, 96 (2015) 100.
S. -H. Chang, B. -S. Kim and T. -K. Min : "Development of Ultra-Supercritical (USC) Power Plant." Transactions of the Korean Society of Mechanical Engineers B, 205 (2012) 210.
공병욱, et al: "특집: 초초임계 화력발전용 터빈 및 보일러 소재." 재료마당 24.2, 18 (2011) 26.
유석현, et al: "초초임계압 화력발전소의 고온화 에 수반되는 재료문제 해결방안." 대한기계학회 2003년도 압력기기 기술대회 논문 및 강연집, 5 (2003) 13.
Evaluating Materials Technology for Advanced Ultrasupercritical Coal Power Plants, Power (2010) 41.
R. Viswanathan and W. T. Bakker : "Materials for Ultra Supercritical Fossil Power Plants", 1-1 (2000) 2-15.
Strader, Katherine C : Phase Transformation Behavior and Stress Relief Cracking Susceptibility in Creep Resistant Steels. Diss. The Ohio State University, 2014.
Nawrocki, J. G., et al : Welding Journal 79.12, 355 (2000) 362.
Hippsley, C. A., John Frederick Knott and B. C. Edwards : Acta Metallurgica 30. 3, 641 (1982) 654.
Nawrocki, J. G., et al : Welding Journal, Newyork, 82.2 (2003) 25.
MASUYAMA : "T23 and T24-new generation low alloyed steels." Coal Power Plant Materials and Life Assessment, Developments and Applications (2014) 87.
J. G. Nawrocki, J. N. DuPont, C. V. Robino and A. R. Marder : Welding Journal, 80, Welding Re search Supplement, 18 (2001) 24.
Brozda, J. B. : Welding International, 18,10. 761 (2004) 770.
A. Dhooge and J. Vekeman : Welding in the World, 49, 75 (2005) 93.
Yu, Xinghua, et al : Acta Materialia 61.6 2194 (2013) 2206.
K. Lee, S. Lee, H. Na and C. Kang : Materials Characterization 121, 31 (2016) 39.
G. Golanski, J. Jasak and J. Slania : Kovove Materialy 52, 99 (2014) 106.
B. Hahn : Properties and Fabrication. New Build &Maintenance. RAFAKO Seminar, 2009.
Hirata, Hiroyuki, and Kazuhiro Ogawa : Materials at High Temperatures 27.3, 219 (2010) 226.
Oliveira, Fernando Lucas Goncalves, Margar eth Spangler Andrade, and Andre Barros Cota : Materials Characterization 58.3, 256 (2007) 261.
Garcia de Andres C, Caballero FG, Capdevila C : Scr Mater, 38, 1835 (1998) 1842.
C. D. Lundin and S. Mohammed : Effect of welding conditions on transformation and properties of heataffected zones in LWR (light - water reactor) vessel steels. No. NUREG / CR-3873, ORNL / Sub--78-7637/1. Nuclear Regul atory Commission (1990).
H. -S. Yang and H. K. D. H. Bhades hia : "Uncertainties in dilatometric determination of martensite start temperature." Materials Science and Technology 23.5, 556 (2007) 560.
J. Arndt, K. Haarman, G. Kottmann, J. C. Vaillant, W. Bendick, G. Kubla, A. Arbab and F. Deshayes : The T23/T24 Book. New grades for waterwalls and superheaters, Information book from Vallourec & Mannesmann Tubes (1998).
C. -Y. Chen, et al : "Microstructural characterization and strengthening behavior of nanometer sized carbides in Ti-Mo microalloyed steels during continuous cooling process." Materials Characterization 114, 18 (2016) 29.
L. M. Fu, et al : Materials Science and Technology (2013).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.