최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. B. B, v.41 no.5 = no.380, 2017년, pp.365 - 372
정혜욱 (부경대학교 인쇄공학과) , 신동윤 (부경대학교 인쇄공학과)
Finger electrodes on a crystalline silicon solar cell are required to be constructed as narrow and thick as possible in order to minimize shading losses and electrical resistance. The most common means to construct high-aspect ratio finger electrodes has been screen-printing, but it has difficulty a...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
태양광 발전방식의 장점과 단점은 무엇인가? | 파력, 조력, 지열 및 풍력과 같은 신재생에너지 방식들은 입지조건과 같은 환경적 영향을 강하게 받기 때문에, 상대적으로 환경적 영향을 덜 받는 태양광 발전방식이 주목을 받고 있다. 태양광 발전방식은 도심발전이 가능하다는 장점이 있으나, 일사량이 상대적으로 낮은 고위도 지역의 경우 태양광 발전의 경제성이 낮은 편이라서 정부의 정책적 지원이 없이 자생하기 힘들었다. | |
벌크 타입 결정질 실리콘 태양전지의 전면부에 형성된 전극은 어떠한 것으로 구성되어 있는가? | 1은 벌크 타입 결정질 실리콘 태양전지의 전면부에 형성된 전극의 구성을 보여주고 있다. 전면전극은 태양전지의 이미터층으로부터 전자를 수집하는 핑거전극(finger electrodes)과, 다수의 핑거전극과 태양광 모듈의 메탈 리본을 접합시켜주기 위한 버스바(busbar)로 구성되어 있다. | |
파력, 조력, 지열 및 풍력과 같은 신재생에너지 방식 보다 태양광 발전방식이 주목을 받는 이유는 무엇인가? | 파력, 조력, 지열 및 풍력과 같은 신재생에너지 방식들은 입지조건과 같은 환경적 영향을 강하게 받기 때문에, 상대적으로 환경적 영향을 덜 받는 태양광 발전방식이 주목을 받고 있다. 태양광 발전방식은 도심발전이 가능하다는 장점이 있으나, 일사량이 상대적으로 낮은 고위도 지역의 경우 태양광 발전의 경제성이 낮은 편이라서 정부의 정책적 지원이 없이 자생하기 힘들었다. |
Seo, T.-J., 2016, "Changes that the Paris Climate Convention will Bring," Korea Investment & Securities, Co., Ltd.
Kang, J.-H., 2016, "Prospects and Issues of the World Renewable Energy Industries in 2016," KEXIM Overseas Research Institute.
SEMI PV Group 2016, International Technology Roadmap for Photovoltaic (ITRPV.net), Results 2015,
Kang, J.-H., 2016, "Photovoltaic Industry Trends in the 1st Quarter of 2016," KEXIM Overseas Research Institute.
Shin, D.-Y., Yoo, S.-S. and Seo, J.-Y., 2015, "Uncertainty Analysis in Contact Resistivity Measurements of Crystalline Silicon Solar Cells," Int. J. Precis. Eng. Manuf.-Green Tech., Vol. 2, No. 3, pp. 237-244.
Shanmugam, V., Wong, J., Peters, I. M., Cunnusamy, J., Zahn, M., Zhou, A., Yang, R., Chen, X., Aberle, A. G. and Mueller, T., 2015, "Analysis of Fine-Line Screen and Stencil-Printed Metal Contacts for Silicon Wafer Solar Cells," IEEE J. Photovolt., Vol. 5, No. 2, pp. 525-533.
Mette, A., Richter, P. L., Horteis, M. and Glunz, S. W., 2007, "Metal Aerosol Jet Printing for Solar Cell Metallization," Prog. Photovoltaics, Vol. 15, No. 7, pp. 621-627.
Horteis, M. and Glunz, S. W., 2008, "Fine Line Printed Silicon Solar Cells Exceeding 20% Efficiency," Prog. Photovoltaics, Vol. 16, No. 7, pp. 555-560.
Mahajan, A., Frisbie, C. D. and Francis, L. F., 2013, "Optimization of Aerosol Jet Printing for High-Resolution, High-Aspect Ratio Silver Lines," ACS Appl. Mater. Interfaces, Vol. 5, No. 11, pp. 4856-4864.
Shin, D.-Y., 2010, "Fabrication of an Inkjet-printed Seed Pattern with Silver Nanoparticulate Ink on a Textured Silicon Solar Cell Wafer," J. Micromech. Microeng., Vol. 20, p. 125003.
Shin, D.-Y., 2011, "Investigation of Laser-induced Damage to a Surface Energy Patterned Solar Cell Wafer for the Formation of an Inkjet-printed Seed Pattern," J. Ceram. Process. Res., Vol. 12, No. 2, pp. s114-s117.
Shin, D.-Y., Cha, Y.-K., Ryu, H.-H. and Kim, S.-H., 2012, "Impact of Effective Volume Ratio of a Dispersant to Silver Nano-particles on Silicon Solar Cell Efficiency in Direct Ink-jet Metallization," J. Micromech. Microeng., Vol. 22, No. 11, p. 115007.
Shin, D.-Y., Seo, J.-Y., Tak, H. and Byun, D., 2015, "Bimodally Dispersed Silver Paste for the Metallization of a Crystalline Silicon Solar Cell using Electrohydrodynamic Jet Printing," Sol. Energy Mater. Sol. Cells, Vol. 136, pp. 148-156.
Shin, D.-Y., Yoo, S.-S., Song, H.-E., Tak, H. and Byun, D., 2015, "Electrostatic-Force-Assisted Dispensing Printing to Construct High-Aspect-Ratio of 0.79 Electrodes on a Textured Surface with Improved Adhesion and Contact Resistivity," Sci. Rep., Vol. 5, p. 16704.
Kim, S. Y., Kim, S. J., Jee, S. S., Park, J. M., Park, K. H., Park, S. C., Cho, E. A., Lee, J. H., Song, I. Y., Lee, S. M., Han, I. T., Lim, K. R., Kim, W. T., Park, J. C., Eckert, J., Kim, D. H. and Lee, E.-S., 2013, "Capillary Flow of Amorphous Metal for High Performance Electrode," Sci. Rep., Vol. 3, p. 2185.
Fields, J. D., Ahmad, M. I., Pool, V. L., Yu, J., Van Campen, D. G., Parilla, P. A., Toney, M. F. and van Hest, M. F., 2016, "The Formation Mechanism for Printed Silver-contacts for Silicon Solar Cells," Nat. Commun., Vol. 7, p. 11143.
Kalio, A., Richter, A., Horteis, M. and Glunz, S. W., 2011, "Metallization of n-type Silicon Solar Cells using Fine Line Printing Techniques," Energy Procedia, Vol. 8, pp. 571-576.
Cimiotti, G., Bartsch, J., Kraft, A., Mondon, A. and Glatthaar, M., 2015, "Design Rules for Solar Cells with Plated Metallization," Energy Procedia, Vol. 67, pp. 84-92.
Beutel, M., Lewis, A., Prondzinski, M., Selbmann, F., Richter, P., Bamberg, F., Raschtschepkin, P., Krause, A., Koch, C., Hentsche, M., Stegemann, K.-H., Schneiderlochner, E. and Neuhaus, H., 2014, "Fine Line Metallization by Coextrusion Technology for Next Generation Solar Cells," Sol. Energy Mater. Sol. Cells, Vol. 131, pp. 64-71.
Pospischil, M., Klawitter, M., Kuchler, M., Specht, J., Gentischer, H., Efinger, R., Kroner, C., Luegmair, M., Konig, M., Horteis, M., Mohr, C., Wende, L., Lossen, J., WeiB, M., Doll, O., Koehler, I., Zengerle, R., Clement, F. and Biro, D., 2013, "Process Development for a High-Throughput Fine Line Metallization Approach Based on Dispensing Technology," Energy Procedia, Vol. 43, pp. 111-116.
Pospischil, M., Klawitter, M., Kuchler, M., Jahn, M., Efinger, R., Schwarz, R., Wende, L., Konig, M., Clement, F. and Biro, D., 2016, "High Speed Dispensing with Novel 6" Print Head," Energy Procedia, Vol. 98, pp. 61-65.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.