최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Composites research = 복합재료, v.30 no.2, 2017년, pp.149 - 157
우경식 (School of Civil Engineering, Chungbuk National University) , 더글라스 케언스 (Department of Mechanical and Industrial Engineering, Montana State University)
In this paper, fracture behavior of laminated composites with notch was studied by cohesive zone modeling approach. The numerical modeling proceeded by first generating 3 dimensional solid element meshes for notched laminated composite coupon configurations. Then cohesive elements representing failu...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
노치가 있는 복합재료은 어떠한 과정으로 인해 최종파괴가 발생하게 되는가 | 노치가 있는 복합재료 적층판의 양단에 인장하중을 가하면 노치 팁에서 응력집중이 발생하고 이에 의해 먼저 기지파손/층간분리가 시작된 후 이들이 진전하면서 최종적 으로 섬유파단에 이르러 최종파괴가 발생하게 된다. 이 파괴문제에 대해 그 동안 많은 연구자들에 의해 실험적[18,20] 및 해석연구[19,21,22]가 수행되어 왔다. | |
일방향 섬유강화 적층복합재료의 파손이 정확한 예측을 어렵게 하는 이유는 무엇인가 | 복합재료는 매우 복잡한 파괴거동을 가지고 있는데 일방향 섬유강화 적층복합재료의 경우 파괴는 섬유파단, 기지파괴 및 층간분리의 파괴모드로 발생한다. 이와 같은 파괴모드들은 단독으로 발생하지 않고 서로 상호작용을 하면서 파손이 진전되므로 정확한 예측을 더욱 어렵게 하고 있으며, 복합재의 파손발생 및 이후 파손의 진전과 최종파괴강도를 예측하기 위한 연구가 계속적으로 이루어지고 있다. | |
일방향 섬유강화 적층복합재료의 파괴모드는 무엇이 있는가 | 이 에 따라 복합재료의 물성 및 파괴거동에 대한 많은 연구가 수행되어 왔는데 다양한 복합재 물성치 예측방법과 파괴 지표 및 파괴모델이 제안되었다(eg, [3-17]). 복합재료는 매우 복잡한 파괴거동을 가지고 있는데 일방향 섬유강화 적층복합재료의 경우 파괴는 섬유파단, 기지파괴 및 층간분리의 파괴모드로 발생한다. 이와 같은 파괴모드들은 단독으로 발생하지 않고 서로 상호작용을 하면서 파손이 진전되므로 정확한 예측을 더욱 어렵게 하고 있으며, 복합재의 파손발생 및 이후 파손의 진전과 최종파괴강도를 예측하기 위한 연구가 계속적으로 이루어지고 있다. |
Mangalgiri, P.D., "Composite Materials for Aerospace Applications," Bulletin of Materials Science, Vol. 22, Iss. 3, 1999, pp. 657-664.
Karbhari, V.M., and Zhao, L., "Use of Composites for 21st Century Civil Infrastructures," Computer Methods in Applied Mechanics and Engineering, Vol. 185, Iss. 2-4, 2000, pp. 433-454.
Tsai, S.W., and Wu, E.M., "A General Theory of Strength for Anisotropic Materials," Journal of Composite Materials, Vol. 5, 1971, pp. 58-80.
Hashin Z., "Failure Criteria for Unidirectional Fiber Composites," Journal of Applied Mechanics, Vol. 47, 1980, pp. 329-334.
Hart-Smith, L.J., "Predictions of the Original and Truncated Maximum-strain Failure Models for Certain Fibrous Composite Laminates," Composites Science and Technology, Vol. 58, 1998, pp. 1151-1179.
Puck, A., and Schurmann, H., "Failure Analysis of FRP Laminates by Means of Physically Based Phenomenological Models," Composites Science and Technology, Vol. 58, 1998, pp. 1045-1067.
Krueger, R., "Virtual Crack Closure Technique: History, Approach, and Applications," Applied Mechanics Reviews, Vol. 57, No. 2, 2004, pp. 109-143.
Quaresimin, M. and Ricotta, M., "Stress Intensity Factors and Strain Energy Release Rates in Single Lap Bonded Joints in Composites Materials," Composites Science and Technology, Vol. 66, Iss. 5, 2006, pp. 647-656.
Matzenmiller, A., Lubliner, J., and Taylor, R.L., "A Constitutive Model for Anisotropic Damage in Fiber Composites," Mechanics and Materials, Vol. 20, 1995, pp. 125-152.
Camanho, P.P., Maimi, P., and Davila, C.G., Prediction of Size Effects in Notched Laminates using Continuum Damage Mechanics," Composites Science and Technology, Vol. 67, 2007, pp. 2715-2727.
Liu, P.F. and Zheng, J.Y., "Progressive Failure Analysis of Carbon Fiber/Epoxy Composite Laminates using Continuum Damage Mechanics," Materials Science and Engineering: A, Vol. 485, 2008, pp. 711-717.
Li, S., Thouless, M.D., Waas, A.M., Schroeder, J.A., and Zavattieri, P.D., "Use of Cohesive-Zone Model to Analyze the Fracture of a Fiber-Reinforced Polymer-Matrix Composites," Composites Science and Technology, Vol. 65, 2005, pp. 537-549.
Turon, A., Davila, C.G., Camanho, P.P., and Costa, J., "An Engineering Solution for Mesh Size Effects in the Simulation of Delamination using Cohesive Zone Models," Engineering Fracture Mechanics, Vol. 74, Iss. 10, 2007, pp. 1665-1682.
Harper, P.W., Sun, L., and Hallet, S.R., "A Study on the Influence of Cohesive Zone Interface Element Strength Parameters on Mixed Mode Behaviour," Composites A, Vol. 43, 2012, pp. 722-734.
Ercin, G.H., Camanho, P.P., Xavier, J., Catalanotti, G., Mahdi, S., and Linde, P., "Size Effect on the Tensile and Compressive Failure of Notched Composite Laminates," Composite Structures, Vol. 96, 2013, pp. 736-744.
Hettich, T., Hund, A., and Ramm, E., "Modeling of Failure in Composites by X-FEM and Level Sets within a Multiscale Framework," Computer Methods in Applied Mechanics and Engineering, Vol. 197, 2008, pp. 414-424.
Vigueras, G., Sket, F., Samaniego, C., Wu, L., Noels, L., Tjahjanto, D., Casoni, E., Houzeaux, G., Makradi, A., Molina-Aldareguia, J.M., Vazques, M., and Jerusalem, A., "An XFEM/CZM Implementation for Massively Parallel Simulations of Composites Fracture," Composite Structures, Vol. 125, 2015, pp. 542-557.
Kortschot, M.T., and Beaumont, P.W.R., "Damage Mechanics of Composite Materials I: Measurements of Damage Strength," Composites Science and Technology, Vol. 39, No. 4, 1990, pp. 289-301.
Kortschot, M.T., and Beaumont, P.W.R., "Damage Mechanics of Composite Materials II: A Damage-based Notch Strength Model," Composites Science and Technology, Vol. 39, No. 4, 1990, pp. 303-326.
Hallet, S.R., and Wisnom, M.R., "Experimental Investigation of Progressive Damage and the Effect of Layup in Notched Tensile Tests," Journal of Composite Materials, Vol. 40, No. 2, 2005, pp. 119-141.
Coats, T.W., and Harris, C.E., "A Progressive Damage Methodology for Residual Strength Predictions of Notched Composite Panels," Journal of Composite Materials, Vol. 33, No. 23, 1999, pp. 2193-2224.
Hallet, S.R., and Wisnom, M.R., "Numerical Investigation of Progressive Damage and the Effect of Layup in Notched Tensile Tests," Journal of Composite Materials, Vol. 40, No. 14, 2006, pp. 1229-1245.
Xu, X.-P., and Needleman, A., "Numerical Simulation of Fast Crack Growth in Brittle Solids," Journal of Mechanics and Physics of Solids, Vol. 42, No. 9, 1994, pp. 1397-1434.
Tvergaard, V., and Hutchinson, J.W., "The Relation between Crack Growth Resistance and Fracture Process Parameters in Elastic-plastic Solids," Journal of Mechanics and Physics of Solids, Vol. 40, No. 6, 1992, pp. 1377-1397.
Geubelle, P.H., and Baylor, J.S., "Impact-induced Delamination of Composites: A 2D Simulation," Composites B, Vol. 29, Iss. 5, 1998, pp. 589-602.
Benzeggagh, M.L., and Kenane, M., "Measurement of Mixed-mode Delamination Fracture Toughness of Unidirectional Glass/Epoxy Composites with Mixed-mode Bending Apparatus," Composites Science and Technology, Vol. 49, 1996, pp. 439-449.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.