최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기전력전자학회 논문지 = The Transactions of the Korean Institute of Power Electronics, v.22 no.2, 2017년, pp.140 - 149
이아라 (School of Electrical Eng., Kookmin University) , 박준우 (School of Electrical Eng., Kookmin University) , 홍성수 (KPEC, School of Electrical Eng., Kookmin University)
This study proposes a new type of active-clamp forward-flyback converter with two transformers that operate in forward and flyback modes during on and off times, respectively, instead of not using an output inductor. The main switch can be turned on with zero-voltage switching (ZVS) using the leakag...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
소프트-스위칭이 가능하다면 생기는 이점은? | 고효율을 얻기 위해서는 스위칭 손실과 도통 손실을 줄이는 노력이 필수적이다. 또한, 소프트-스위칭이 가능하면 스위칭 주파수의 증가가 가능하여 자성소자들의 부피 감소가 가능하여 소형화로이어지게 된다[1]-[4]. | |
전력변환장치의 고효율을 얻기 위해서 필수적인 것은? | 최근의 전력변환장치는 전자 통신 기기 등에 안정된 전원을 공급하면서 고효율, 소형화 및 전력의 고밀도화를 이루는 것이 중요하다. 고효율을 얻기 위해서는 스위칭 손실과 도통 손실을 줄이는 노력이 필수적이다. 또한, 소프트-스위칭이 가능하면 스위칭 주파수의 증가가 가능하여 자성소자들의 부피 감소가 가능하여 소형화로이어지게 된다[1]-[4]. | |
새로운 방식의 포워드-플라이백 컨버터의 회로에는 무엇을 사용하였는가? | 본 논문에서는 대용량에서도 ZVS가 가능하며 고효율 달성이 가능한 새로운 방식의 포워드-플라이백 컨버터를 제안하였다. 제안회로는 메인스위치의 ZVS범위를 설계자가 원하는 대로 키우며 그에 따른 2차 측의 공진 전압을 손실이 적게 클램핑시키기 위하여 보조 인덕터와 보조 다이오드를 사용하였다. 따라서 전 부하에서 메인스위치의 ZVS가 보장되기 때문에 스위칭 손실 및 발열이 크게 개선되고 EMI 성능에 유리한 장점이 있다. |
R. J. Wai, C. Y. Lin, R. Y. Duan, and Y. R. Chang, "High-efficiency DC-DC converter with high voltage gain and reduced switch stress," IEEE Transactions on Industrial Electronics, Vol. 54, No. 1, pp. 354-364, Feb. 2007.
G. Hua, C. S. Leu, and F. C. Lee, "Novel zero-voltage transition PWM converters," IEEE Transactions on Power Electronics, Vol. 9, No. 2, pp. 213-219, Mar. 1994.
T, Zhang, P. C. Sen, and Y. F. Liu, "A novel zero voltage switched(ZVS) buck converter using coupled inductor," Proc. Canadian Conf. Electrical and Computer Engineering, Vol. 1, pp. 357-362, May 2011.
H. L. Do, "Zero-voltage-switching synchronous buck converter with a coupled inductor," IEEE Transactions on Industrial Electronics, Vol. 58, No. 8, pp. 3440-3447, Aug. 2011.
J. A. Sabate, V. Vlatkovic, R. B. Ridely, F. C. Lee, and B. H. Cho, "Design considerations for high-voltage high power full-bridge zero-voltage-switched PWM converter," Proc. IEEE APEC'90(IEEE Catalog No. CH2853-0/90/0000-0265), pp. 275-284, 1990.
P. K. Jain, W. Kang, H. Soin, and Y. Xi, "Analysis and design considerations of a load and line independent zero voltage switching full bridge DC/DC converter topology," IEEE Transactions on Power Electronics, Vol. 17, No. 5, pp. 649-657, Sep. 2002.
L. H. Mweene, C. A. Wright, and M. F. Schlecht, "A 1kW 500kHz front-end converter for a distrbuted power supply system," IEEE Transactions on Power Electronics, Vol. 6, No. 3, pp. 398-407, Jul. 1991.
I. Cohe, D. Hills, and N. Y, "Pulse width modulated DC/DC converter with reduced ripple current stress and zero voltage switching capability," U.S Patent 5291382 A.
Y. H. Kang, B. C. Choi, and W. S. Lim, "Analysis and design of a forward-flyback converter employing two transformers," PESC (Power Electronics Specialists Converence), Vol. 1, pp. 357-362, Jun. 2001.
Y. Xi, P. K. Jain, G. Joos, and H. Jin, "A zero voltage switching forward converter topology," Proc. Telecommunications Energy Conf., pp. 116-123, Oct. 1997.
Y. K. Lo and J. Y. Lin, "Active-clamping ZVS flyback converter employing two transformers," IEEE Transactions on Power Electronics, Vol. 22, No. 6, pp. 2416-2423, Nov. 2007.
Y. Y. Wen, H. Mao, and I. Batarseh, "DC bias analysis and small signal forward-flyback dc-dc converter with a current doubler rectifier," APEC 2005, Vol. 3, pp. 1531-1536, 2005.
B. R. Lin, H. K. Chiang, and C. C. Chen, "Analysis of a zero-voltage switching converter with two transformers," IEEE Transactions on Circuits and Systems II, Vol. 53, No. 10, pp. 1088-1092, Oct. 2006.
H. K. Yoon, E. S. Choi, S. K. Han, G. W. Moon, and M. J. Youn, " Zero-voltage and zero-current switching two transformer full-bridge converter using the output voltage doubler," IPEMC (Power Electronics andd Motion Control Conference) , Vol. 2, pp. 1-5, Aug. 2006.
H. K. Yoon, S. K. Han, J. S. Park, G. W. Moon, and M. J. Youn, "Zero-voltage switching two-transformer full-bridge PWM converter with lossless diode-clamp rectifier for PDP sustain power module," IEEE Transactions on Power Electronics, Vol. 21, No. 5, pp. 1243-1252, Sep. 2006.
Hren, Alenka, J. Korelic, and M. Milanovic, "RC-RCD clamp circuit for ringing losses reduction in a flyback converter," IEEE Transactions on Circuits and Systems II, Vol. 53, No. 5, pp. 369-373, May 2006.
J. A. Cobos, "RCD clamp PWM forward converter with self driven synchronous rectification," IECON (Industrial Electronics, Control, and Instrumentation), Vol. 2, pp. 1336-1341, Nov. 1993.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.