$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

[국내논문] 제약이론을 활용한 재구성가능 생산시스템의 레이아웃 설계
Design of a System Layout for Reconfigurable Manufacturing System with Theory of Constraints 원문보기

한국CDE학회논문집 = Korean Journal of Computational Design and Engineering, v.22 no.2, 2017년, pp.129 - 140  

쿠르니아디 케지아 아만다 (부산대학교 산업공학과) ,  류광열 (부산대학교 산업공학과)

Abstract ▼ AI-Helper 아이콘AI-Helper

This paper presents a systematic approach for design of timely and proper layouts of a manufacturing system facilitating reconfigurability, referred to as a reconfigurable manufacturing system. A proper methodology for design of a system layout is required for reconfiguration planning - adding or re...

주제어

#Reconfigurable system design   #Reconfigurable manufacturing system   #Theory of constraints   #Scalability  

AI 본문요약
AI-Helper 아이콘 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

가설 설정

  • (3) All the machines within the same stage perform exactly the same sequence of tasks.
  • (6) Company budget doesn’t include maintenance fee for added machines.
  • Following questions has to be considered during the thinking process: What needs to be changed? What should it be changed to? What actions will cause the change? The throughput accounting is a method of simplifying and measuring what matters most in an organization so the company always working towards achieving higher profits and cash flow. In accounting to see if the company is achieving its goals three questions needs answer: 1. How much money is my company generating? 2. How much money is actually captured by my company? 3.
  • In accounting to see if the company is achieving its goals three questions needs answer: 1. How much money is my company generating? 2. How much money is actually captured by my company? 3. How much do I spend to operate my company? In throughput accounting these questions are turned into following TOC Performance measures: Throughput (the rate at which the system generates new money through sales), Inventory (money that is tied up in physical tings, product inventory, equipment etc.
본문요약 정보가 도움이 되었나요?

참고문헌 (17)

  1. Wang, W. and Koren, Y., 2012, Scalability Planning For Reconfigurable Manufacturing Systems, Journal of Manufacturing Systems, 31(2), pp.83-91. 

    상세보기 crossref

  2. Wiendahl, H.P. and ElMaraghy, H.A., 2007, Changeable Manufacturing-Classification, Design and Operation, Annals of the CIRP, 56(2), pp.783-809. 

    상세보기 crossref

  3. Koren, Y. and Shpitalni, M., 2010, Design of Reconfigurable Manufacturing System, Journal of Manufacturing System, 29(4), pp.130-141. 

    상세보기 crossref

  4. Koren, Y., Jovane, F. and Heisel, U., 1999, Reconfigurable Manufacturing Systems: A keynote paper, Annals of the CIRP, 48(2), pp.6-12. 

  5. Mehrabi, M., Ulsoy, A.G. and Koren, Y., 2002, Trends and Perspectives in Flexible and Reconfigurable Manufacturing Systems, Journal of Intelligent Manufacturing, 13(2), pp.135-146. 

    crossref

  6. Koren, Y., 2006, General RMS Characteristics. Comparison with Dedicated and Flexible Systems, In: Dashchenko A.I. (ed.) Reconfigurable Manufacturing Systems and Transformable Factories, Springer Verlag, Berlin/Heidelberg, pp.27-46. 

  7. Hu, S., Koren, Y. and Stecke, K., 2006, Introduction, Journal of Flexible Manufacturing Systems, 17(2), pp.259-260. 

  8. Koren, Y., Heisel, U. and Jovane, F., 1998, Reconfigurable Manufacturing System, Annals of the CIRP, 48(2), pp.517-540. 

  9. Koren, Y. and Ulsoy, A.G, 2002, Vision, Principles and Impact of Reconfigurable Manufacturing Systems, Powertrain International, 5(3), pp.14-21. 

  10. Maier-Speredelozzi, V., Koren, Y. and Hu, S.J., 2003, Convertibility Measures For Manufacturing Systems, Annals of the CIRP, 52(1), pp.367-371. 

    상세보기 crossref

  11. Won, Y. and Currie, K.R., 2006, An Effective P-Median Model Considering Production Factors In Machine Cell-Part Family Formation, Journal of Manufacturing Systems, 25(1), pp.58-64. 

    상세보기 crossref

  12. Goldratt, E.M., 1980, Optimized Production Timetable: A Revolutionary Program for Industry, Proceedings APICS 23rd Annual Conference, Falls Church, VA, USA, pp.172-176. 

  13. Goldratt, E.M. and Cox, J., 1984, The Goal - A Process of Ongoing Improvement, North River Press, Croton-on-Hudson, New York, USA. 

  14. Goldratt, E.M., 1993, What is the Theory of Constraints? The performance Advantage, North River Press, Croton-on-Hudson, New York, USA. 

  15. Goldratt, E.M., 1990, What is This Thing Called The Theory of constraints?, North River Press, Croton-on-Hudson, New York, USA. 

  16. Balderstone, S.J. and Mabin, V.J., 1984, A Review of Goldratt's Theory of Constraints (TOC) - Lessong from the International Literature, School of Business and Public Management, Victoria University of Wellington, New Zealand. 

  17. Freihet, T., Wang, W. and Spicer, P., 2007, A Case Study In Productivity-Cost Trade-Off in the Design of Paced Parallel Production Systems, International Journal of Production Research, 45(14), pp.3263-3288. 

    상세보기 crossref

저자의 다른 논문 :

LOADING...

관련 콘텐츠

이 논문과 함께 이용한 콘텐츠

유발과제정보 저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로