최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국CDE학회논문집 = Korean Journal of Computational Design and Engineering, v.22 no.2, 2017년, pp.190 - 201
장승호 (동국대학교 컴퓨터공학과) , 홍정모 (동국대학교 컴퓨터공학과)
This paper proposes how to solve a problem of FDM 3D printer's irregular output when changing volume of extrusion, adjusting movement speed of the printer's head and a way to fill new inner part. Existing slicers adjust directly to change the rotation speed of the stepper. In this method, the change...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
3D 프린터의 긴 출력 시간을 단축시키기 위한 방법으로 어떤 것이 제안되는가? | 그러나 긴 출력 시간으로 인한 낮은 생산성이 3D 프린터의 대중화를 가로막고 있다. 기존의 논문들은 긴 출력 시간을 단축시키기위해서 3D 프린터의 압출 면적을 조절하는 방법[2], 속도를 제어하는 방법[3], 내부를 최소한으로 채우는 방법[4], 그리고 모델을 여러 조각으로 나누어 출력하는 방법[5,6] 등을 제안하고 있다. | |
3D 프린터의 대중화를 가로막는 것은 무엇인가? | Fused deposition modeling(FDM) 3D 프린터[1]는 특허의 만료와 함께 개인용 3D 프린터로 많이 알려지게 되었다. 그러나 긴 출력 시간으로 인한 낮은 생산성이 3D 프린터의 대중화를 가로막고 있다. 기존의 논문들은 긴 출력 시간을 단축시키기위해서 3D 프린터의 압출 면적을 조절하는 방법[2], 속도를 제어하는 방법[3], 내부를 최소한으로 채우는 방법[4], 그리고 모델을 여러 조각으로 나누어 출력하는 방법[5,6] 등을 제안하고 있다. | |
투명조각자기의 내부를 압출 면적을 조절하여 완전히 채우는 방법의 장점은 무엇인가? | 우리는 압출 면적을 조절하여 내부를 완전히 채우는 방법을 제안한다. 이 방법은 여러 번 이동해서 채워야 할 곳을 한 번의 이동으로 가능하게 만들어 출력 시간을 단축시킬 수 있다. |
Crump, S. Scott., Apparatus and Method for Creating Three-dimensional Objects, Stratasys, Inc., U.S. Patent No. 5,121,329.
Jang, S.-H., Lim, J.-G., Kim, B.-J. and Hong, J.-M., 2015, Adaptive Speed Slicing, Proceedings of the Society of CAD/CAM Engineers Conference, pp.203-210.
Musialski, P., Auzinger, T., Birsak, M., Wimmer, M. and Kobbelt, L., 2015, Reduced-order Shape Optimization Using Offset Surfaces, ACM Trans. Graph., 34(4), pp.102.
Song, P., Deng, B., Wang, Z., Dong, Z., Li, W., Fu, C.W. and Liu, L., 2016, CofiFab: Coarse-to-fine Fabrication of Large 3D Objects, ACM Transactions on Graphics (TOG), 35(4), pp.45.
Wang, W.M., Zanni, C. and Kobbelt, L., 2016, Improved Surface Quality in 3D Printing by Optimizing the Printing Direction, In Computer Graphics Forum, 35(2), pp.59-70.
Margaret Carney, 2008, Lithophanes, Schiffer Publising.
Cura manual, http://ultimaker.com/en/resources/manuals
Reprap-dev Accelerating While Extruding Print Quality, http://reprap.org/pipermail/reprap-dev/2011-May/003323.html
Yuan, M., 2014, Additive Manufacturing of Laser Sintered Polyamide Optically Translucent Parts, The University of Texas, Austin, TX.
Yuan, M. and Bourell, D., 2013, Fundamental Issues for Additive Manufacturing of Lithophanes, International Conference of Advanced Research in Virtual and Rapid Prototyping, CRC Press, pp.89-93.
Ahn, S., Lee, C.S. and Felong, W., 2004, Development of Translucent FDM Parts by Post-processing, Rapid Prototyping Journal, 10(4), pp.218-224.
Suwanprateeb, F. and Suwanpreuk, W., 2009, Development of Translucent and Strong Three Dimensional Printing Models, Rapid Prototyping Journal, 15(1), pp.52-58.
Bikas, H., Stavropoulos, P. and Chryssolouris, G., 2016, Additive Manufacturing Methods and Modelling Approaches: A Critical Review, The International Journal of Advanced Manufacturing Technology, 83(1-4), pp.389-405.
Mohan Pandey, P., Venkata Reddy, N. and Dhande, S.G., 2003, Slicing Procedures in Layered Manufacturing: A Review, Rapid Prototyping Journal, 9(5), pp.274-288.
Bellini, A., Guceri, S. and Bertoldi, M., 2004, Liquefier Dynamics in Fused Deposition, Journal of Manufacturing Science and Engineering, 126(2), pp.237-246.
Turner, B.N. and Gold, S.A. 2015. A Review of Melt Extrusion Additive Manufacturing Processes: II. Materials, Dimensional Accuracy, and Surface Roughness, Rapid Prototyping Journal, 21(3), pp.250-261.
Dolenc, A. and Makela, I., 1994, Slicing Procedures for Layered Manufacturing Techniques, Computer-Aided Design, 26(2), pp.119-126.
Sabourin, E., Houser, S.A. and Helge Bohn, J., 1996, Adaptive Slicing Using Stepwise Uniform Refinement, Rapid Prototyping Journal, 2(4), pp.20-26.
Tyberg, J. and Bohn, J.H., 1999, FDM Systems and Local Adaptive Slicing, Materials & Design, 20(2), pp.77-82.
Tyberg, J.T., 1998, Local Adaptive Slicing for Layered Manufacturing, M.S. Thesis, Virginia Polytechnic Institute and State University, Blackburg, VA.
Tyberg, J. and Helge Bohn, J., 1998, Local Adaptive Slicing, Rapid Prototyping Journal, 4(3), pp.118-127.
Sabourin, E., Houser, S.A. and Helge Bohn, J., 1997, Accurate Exterior, Fast Interior Layered Manufacturing, Rapid Prototyping Journal, 3(2), pp.44-52.
Mani, K., Kulkarni, P. and Dutta, D., 1999, Region-based Adaptive Slicing, Computer-Aided Design, 31(5), pp.317-333.
Blum, H., 1964, A Transformation for Extracting New Descriptions of Shape, Symposium on Models for the Perception of Speech and Visual Form, Cambridge, MA: M.I.T. Press.
Gursoy, H.N. and Patrikalakis, N.M., 1992. An Automatic Coarse and Fine Surface Mesh Generation Scheme Based on Medial Axis Transform: Part I Algorithms, Engineering with Computers, 8(3), pp.121-137.
Held, M., 1991, On the Computational Geometry of Pocket Machining, Springer Science & Business Media.
Preparata, F.P. and Shamos, M., 2012, Computational Geometry: An Introduction, Springer Science & Business Media.
Toussaint, G.T., 1980, Pattern Recognition and Geometrical Complexity, In Proceedings of the 5th International Conference on Pattern Recognition, 334, pp.347.
Agarwala, M.K., Jamalabad, V.R., Langrana, N.A., Safari, A., Whalen, P.J. and Danforth, S.C., 1996, Structural Quality of Parts Processed by Fused Deposition. Rapid Prototyping Journal, 2(4), pp.4-19.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.