최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기목재공학 = Journal of the Korean wood science and technology, v.45 no.3, 2017년, pp.258 - 267
양인 (충북대학교 농업생명환경대학 목재종이과학과) , 채현규 (SY에너지(주)) , 한규성 (충북대학교 농업생명환경대학 목재종이과학과)
In this study, pitch pine (Pinus rigida, PIR) and Mongolian oak (Quercus mongolica, QUM) pellets were fabricated with bark or/and drying waste liquor (DWL) of larch (Larix kaempferi, LAK) as an additive. Based on the results of fuel characteristics of the pellets, optimal conditions for producing th...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
2017년도에 많은 비중을 차지하는 재생에너지들은 무엇인가? | 우리나라도 2030년까지 온실가스를 배출 전망치 대비 37%까지 감축하겠다는 목표로 로드맵을 마련하고 있으며, 시장 친화적이고 혁신적인 기술을 기반으로 여러 재생자원을 이용한 감축 수단을 이용할 예정이다(Korea Energy Agency, 2015). 현재 재생에너지 가운데 폐기물, 풍력, 바이오매스, 태양광 등이 차지하는 비중이 많은 부분을 차지하고 있으며, 이에 대한 보급 목표치를 설정하고 온실가스 감축을 달성한다는 계획을 수립하였다. 결과적으로 바이오매스를 활용한 재생에너지의 생산도 계속 증가할 것으로 전망되는 가운데 국내 자원보유 현황을 토대로 목재펠릿이 차지하는 비중이 지속적으로 증가할 것으로 예상된다. | |
국내 임목축적량이 높은 참나무류를 목재펠릿 제조 원료로 쓰는 방안이 나온 이유는 무엇인가? | 현재까지 목재펠릿용 원료로서 소나무와 비교하여 가격이 저렴하고, 지속적 공급이 가능한 낙엽송이 주로 사용되고 있다. 그러나 향후 목재펠릿 수요량에 대한 전망치를 분석한 결과 낙엽송만으로는 충분한 원료 공급이 불가능할 것으로 판단되며, 따라서 낙엽송과 함께 펠릿제조용 원료로서 사용이 가능한 새로운 목재 원료에 대한 탐색이 필요한 실정이다. 이를 위하여 국내에서 임목축적량이 높은 참나무류의 신갈나무(50,000 m3)와 리기다소나무(10,000 m3)를 목재펠릿 제조용 원료로 이용하는 방안이 요구된다. | |
목재펠릿은 무엇인가? | 목재펠릿은 톱밥 크기로 파쇄된 목질계 바이오매스에 열과 압력을 가하여 일정한 크기로 성형한 고체 바이오 연료로서 착화성이 좋고, 고밀화로 연소효율이 우수함과 동시에 운반 및 보관이 용이하고, 형상과 함수율이 일정하여 연소기의 자동화 및 자동화에 따른 온도 조절이 가능하며, 이산화탄소와 분진배출량이 적은 환경 친화적인 연료이다(Ahn et al.,2013). |
Ahn, B.J., Lee, S.M., Choi, S.H., Cho, S.T., Choi, D.H. 2013. Preparation of standards and quality standard for the implementation of wood fuel labeling. 2013 Proceedings of The Korean Society of Wood Science and Technology Annual Meeting: 114-115.
Ahn, B.J., Chang, H.S., Lee, S.M., Choi, D.H., Cho, S.T., Han, G.S., Yang, I. 2014. Effect of binders on the durability of wood pellets fabricated from Larix kaempferi C. and Liridendron tulipifera L. sawdust. Renewable Energy 62: 18-23.
Bergstrom, D., Israelsson, S., Ohman, M., Dahlqvist, S., Gref, R., Boman, C., Wasterlund, I. 2008. Effects of raw material particle size distribution on the characteristics of Scots pine sawdust fuel pellets. Fuel processing Technology 89: 1324-1329.
Briggs, J.L., D.E. Maier, B.A. Watkins, and K.C. Behnke. 1999. Effects of ingredients and processing parameters on pellet quality. Poultry Science 78: 1464-1471.
Han, G.S., Yang, I., Sagong, M. 2012. Investigation of the basic properties of agriculture residues as a raw material for the production of agropellets and the evaluation of their fuel characteristics. Journal of Korea Society of Waste Management 29(2): 169-179.
Jeong, G.S., Park, B.S. 2007. Wood properties of the useful tree species grown in Korea. Korea Forest Research Institute, Seoul, Republic of Korea.
Kim, H., Lu, G., Li, T., Sadakata, M. 2002. Binding and desulfurization characteristics of pulp black liquor in biocoalbriquettes. Environment Science and Technology. 36: 1607-1612.
Kim, S.H., Jeong, S.K., No, S.G., Kim, M.Y., Han, G.S. 2013. Comparison of wood pellets distributed domestically. 2013 Proceedings of The Korean Society of Wood Science and Technology Annual Meeting: 118-119.
Kim, S.H., Yang, I., Han, G.S. 2015. Effect of moisture content and particle size of sawdust and operation time of flat-die pelletizer on the fuel characteristics of wood pellets fabricated with Mongolian oak and rigida pine sawdust. New & Renewable Energy 11(3): 1-10.
Korea Energy Agency. 2015. New & Renewable Energy Statistics 2014. KEA, Yongin, Republic of Korea.
Korea Association of Pellet. 2016. Korea Forest Service-Statistical data of wood pellet. http://www.koreapellet.org/ [accessed Dec 30, 2016].
Lee, S.M., Ahn, B.J., Choi, D.H., Han, G.S., Jeong, H.S., Ahn, S.H., Yang, I. 2013, Effects of densification variables on the durability of wood pellets fabricated with Larix kaempferi C. and Liriodendron tulipifera L. sawdust. Biomass and Bioenergy 48: 1-9.
Lehtikangas, P. 2001. Quality properties of pelletised sawdust, logging residues and bark. Biomass and Bioenergy 20: 351-360.
Li, Y. and H. Liu. 2000. High-pressure densification of wood residues to form an upgraded fuel. Biomass and Bioenergy 19: 177-186.
Mani, S., Tabil, L.G., Sokhansanj, S. 2006. Effects of compressive force, particle size and moisture content on mechanical properties of biomass pellets from grasses. Biomass and Bioenergy 20: 648-654.
Ministry of Environment. 2016. New Paris Climate Agreement. https://www.me.go.kr/home/file/readDownloadFile.do?fileId130470&fileSeq1&openYnY [accessed Jan 18, 2017].
National Institute of Forest Science. 2016. Standard and quality grades for wood-based products: Wood pellets, NIFOS No. 2016-6, Seoul, Republic of Korea.
Obernberger, I., Thek, G. 2004. Physical characterization and chemical composition of densified biomass fuels with regard to their combustion behavior. Biomass and Bioenergy 27: 653-669.
Stakl, M., Granstrom, K., Berghel, J., Renstorm, R. 2004. Industrial process for biomass drying and their effects on the quality properties of wood pellets. Biomass and Bioenergy 27: 621-628.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.