최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기韓國鋼構造學會 論文集 = Journal of Korean Society of Steel Construction, v.29 no.1, 2017년, pp.81 - 88
이수권 (동양미래대학교, 건축학과) , 양재근 (인하대학교, 건축공학과) , 강지석 (인하대학교, 건축공학과)
Residual stress is defined as stress that already exists on a structural member from the effects of welding and plastic deformation before the application of loading. Due to such residual stress, welded H-section compression members under centroidal compression load can undergo buckling and failure ...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
용접된 부재는 어떠한 과정을 통해서 잔류응력이 발생합니까? | 용접된 부재는 용접 시에 입열에 의하여 팽창하였다가 냉각 시에 수축하는 과정을 통하여 잔류응력이 발생한다. 잔류응력의 분포는 일반적으로 용접순서, 용접패스의 수 등에 의해서는 큰 영향을 받으나 용접전압, 용접속도, 예열온도, 예열부위 등에 의해서는 상대적으로 작은 영향을 받는 것으로 알려져 있다[1]. | |
용접부에 발생하는 잔류응력의 방향성에 따른 크기적 차이는 무엇입니까? | 용접부에 발생하는 잔류응력은 용접부와 평행한 길이방향 및 용접부에 수직한 폭 방향에 따라서 정량적인 크기 차이가 발생한다. 일반적으로 용접부에 수직한 폭 방향에 발생한 잔류응력은 용접부에 평행한 길이방향에 발생하는 잔류응력의 30% 값에 해당한다. 또한, 용접부 두께 방향으로 발생하는 잔류응력은 포물선 형태로 중앙부가 최대가 된다[2]. | |
확장단부판 접합부란 무엇입니까? | 확장단부판 접합부는 강구조물의 보-기둥 접합부 혹은 변단면 부재로 구성된 PEB 구조시스템에 적용되는 접합부의 한 형태이다. 확장단부판 접합부는 접합부를 구성하는 단부판의 두께, 고장력볼트의 게이지 거리, 고장력볼트 축부의 직경, 고장력볼트의 개수 등의 영향으로 상이한 거동특성을 나타낸다. |
방희선, 오종인(2007) 유한요소법을 이용한 하이브리드용접부의 열 및 용접잔류응력 해석, 대한용접학회지, 대한용접학회, 제25권, 제6호 , pp.565-570. Bang, H.S. and Oh, C.I. (2007) Analysis of Thermal and Welding Residual Stress for Hybrid Welded Joint by finite Element Method, Journal of Korean Welding and Joining Society, KWJS, Vol.25, No.6, pp.565-570.
김상식, 윤성기(2016) 강구조설계 3판, 문운당. Kim, S.S. and Yoon, S.K. (2016) Design of Steel Structures 3rd Edition, Munundang.
김경식, 박헌용(2013) 수평재 및 사재로 보강된 조립기둥 시스템의 압축강도 평가, 대한토목학회지, 대한토목학회, 제33권, 제6호, pp. 2169-2179. Kim, K.S. and Park, H.Y. (2013) Evaluation of Compressive Strength of Assembled Column System Reinforced with Cross-Arms and Stayed Struts, Journal of Korean Society of Civil Engineers, KESE, Vol. 33, Issue 6, pp.2169-2179.
Franssen, J.M., Schleich, J.B., Cajot, L.G., and Azpiazu, W. (1996) A Simple Model for the Fire Resistance of Axially Loaded Members - Comparison with Experimental Results, Journal of Constructional Steel Research, Elsevier, Vol.37, No.3, pp.175-204.
윤종휘, 이치형, 윤성기(2016) 중심축 하중을 받는 고온상태 강재기둥의 압축강도에 관한 연구, 한국강구조학회 논문집, 한국강구조학회, 제28권, 제4호, pp.253-261. Yoon, J.H., Lee, C.H., and Yoon, S.K. (2016) A Study on Compressive Strength of Centrally-Loaded Steel Columns at Elevated Temperatures, Journal of Korean Society of Steel Construction, KSSC, Vol.28, No.4, pp.253-261.
용접강도연구위원회(2005) 유한요소해석을 이용한 Arc용접부의 온도 분포 예측 표준화, 대한용접학회지, 대한용접학회, 제23권, 제6호, pp.497-503. Commission of Design, Analyses and Structural Strength of Welded Structures (2005), Standardization for Temperature Distribution Prediction of the Arc Weld using FEA, Journal of Korean Welding and Joining Society, KWJC, Vol.23, No.6, pp.497-503.
Messler, Jr. and Rober, W. (2007) Principles of Welding: Processes, Physics, Chemistry, and Metallurgy.
양재근, 강지석(2016) 중심압축 하중을 받는 용접 조립된 Built-up H-형강 압축부재의 잔류응력 평가, 한국강구조학회 학술대회 발표집, pp.37-38. Yang, J.G. and Kang, J.S. (2016), Evaluation of Residual Stress of Welded Built-up H-section Compression Members Under Concentrically Compressed Axial Loads, Proceedings of Annual Academic or Technical Conferences of KSSC, pp.37-38.
박호상, 서상정(2010), 국부좌굴과 뒤틀림좌굴이 발생하는 종방향 보강재로 보강된 강판의 압축강도, 한국강구조학회 논문집, 제22권, 제3호, pp.219-228. Park, H.S. and Seo, S.J.(2010) The Compressive Strength of Longitudinally Stiffened Plates Undergoing Local and Distortional Buckling, Journal of Korean Society of Steel Construction, KSSC, Vol.22, No.3, pp.219-228.
Salmon, C.G., Johnson, J.E., and Malhas, F.A. (2009) Steel Structures: Design and Behavior (5th Edition), Pearson Education , p.248.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.