최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국연소학회지 = Journal of the Korean Society of Combustion, v.22 no.2, 2017년, pp.1 - 8
손진우 (세종대학교 기계공학과) , 손채훈 (세종대학교 기계공학과) , 윤지수 (서울대학교 기계항공공학부) , 윤영빈 (서울대학교 기계항공공학부)
To evaluate the combustion instability of a gas turbine combustor, the DMD technique was applied. The mode frequency results for each fuel composition were compared with FFT(Fast Fourier Transform) results. The damping coefficient, which is a quantitative parameter for combustion instability, was ev...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
FFT 기법이란? | 그 중 가장 많이 사용되는 방법이 고속 푸리에 변환(fast Fourier transform,FFT)이다. FFT 기법은 하나의 점(monitor point)에서 주어진 시간에 대해 저장된 압력 신호를 주파수에 대해 처리하는 방법을 말한다. 그러나 연소실 전체에 대한 해석이나 측정된 주파수와 관련된 음향 모드의 해석에는 한계가 있다. | |
전달함수는 어떻게 구분되는가? | 현재 가장 많이 사용되고 있는 방법 중 하나가 외부 유동 섭동으로부터 화염의 열방출 사이의 메커니즘을 규명하기 위한 전달함수를 이용한 방법이다. 전달함수는 선형 열음향해석 모델인 화염전달함수(flame transfer function, FTF), 비선형 해석 모델인 화염묘사함수(flame describing function, FDF)로 나뉜다. 이 방법을 이용한 연구는 국내외적으로 매우 활발하게 진행되어 왔다[7-9]. | |
FFT 기법의 한계점은? | FFT 기법은 하나의 점(monitor point)에서 주어진 시간에 대해 저장된 압력 신호를 주파수에 대해 처리하는 방법을 말한다. 그러나 연소실 전체에 대한 해석이나 측정된 주파수와 관련된 음향 모드의 해석에는 한계가 있다. 이러한 한계를 극복하기 위해 Dynamic mode decomposition(DMD)이 제시되었다. |
C.L. Timothy, Investigation of combustion instability mechanisms in premixed gas turbines, Ph.D. thesis, Georgia Institute of Technology, (1999) 1-52.
J.S. Yoon, M.K. Kim, M.C. Lee and Y.B Yoon, Combustion Instability Flame Structure Characteristics in Model Gas Turbine using the Chemiluminescence Measurement, The 43th KOSCO Symposium, 2011, 159-163.
D.S Kim, Introduction to Thermoacoustic Models for Combustion Instability Prediction Using Flame Transfer Function, J. of KSPE, 15(6), (2011) 98-106.
T. Poinsot, "Prediction and control of combustion instabilities in real engines," Proc. Combust. Inst., 2016, 1-28.
A. Urbano, Q, Douasbin, L, Selle, G. Staffelbach, B. Cuenot, T. Schmitt, S. Candel, Study of flame response to transverse acoustic modes from the LES of a 42-injector rocket engine. Proc. Combust. Inst., (2016), 2633-2639.
J.S. Yoon, S.P, Joo, J.J. Kim, M.C. Lee, J.G. Lee, Y.B. Yoon, Effects of convection time on the high harmonic combustion instability in a partially premixed combustor, Proc. Combust. Inst., 36(3) (2017) 3753-3761.
G. Campa, C. Roberto, Influence of Nonlinear Flame Models on Thermoacoustic Instabilities in Combustion Chambers, ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition. ASME, 2016, V04AT04A055.
S. Candel, D. Durox, T. Schuller, P. Palies, J.F Bourgouin, J.P. Moeck, Progress and challenges in swirling flame dynamics. Comptes. rendus. mecanique., 340 (2012) 758-768.
K.K. Chen, J.H. Tu, C.W. Rowley, Variants of dynamic mode decomposition: connections between Koopman and Fourirer analyses, J. Nonlinear Sci., 22(6) (2012) 887-915.
P.J. Schmid, Dynamic mode decomposition of numerical and experimental data, J. of Fluid Mech., 656 (2010) 5-28.
G. Golub, W. Kahan, Calculating the singular values and pseudo-inverse of a matrix. J. SIAM Numer. Anal., (1965), 205-244.
C.H. Sohn, I.S. Park, S.K. Kim, H.J. Kim, Acoustic tuning of gas-liquid scheme injectors for acoustic damping in a combustion chamber of a liquid rocket engine, J. of Sound and Vib., 304(3) (2007), 793-810.
K. Liu, V. Sanderson, The influence of changes in fuel calorific value to combustion performance for Siemens SGT-300 dry low emission combustion system, Fuel, 103 (2013) 239-246.
J.S Yoon, M.C. Lee, S.P. Joo, J.J. Kim, Y.B. Yoon, Experimental Study on Combustion Instability Mode Shifting Phenomenon at Various Fuel Composition in the Model Gas Turbine Combustor, KSAS symposium, 2013, 256-259.
J.S. Yoon, S.P, Joo, J.J. Kim, Y.B. Yoon, Change in combustion instability mode characteristics during the $H_2/CH_4$ composition variation in model gas turbine combustor, KSAS symposium, 2014, 225-229.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.