최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기대한치과기공학회지 = The Journal of Korean Academy of Dental Technology, v.39 no.2, 2017년, pp.101 - 107
이경은 (고려대학교 일반대학원 보건과학과 치의기공전공) , 박진영 (고려대학교 보건과학연구소) , 김지환 (고려대학교 일반대학원 보건과학과 치의기공전공) , 김웅철 (고려대학교 일반대학원 보건과학과 치의기공전공)
Purpose: The purpose of this study was to compare the shear bond strength of the metal-heat pressed glass ceramic bilayer structure. Methods: Metal framework specimens were prepared and surface is spreaded opaque(IPS InLine system opaque, IvoclarVivadent, Liechtenstein). There were 10 specimens for ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
금속-도재관은 어떤 재료인가? | 금속-도재관은 현재까지 알려진 보철 재료 중 임상 성공률이 가장 높고, 가장 대중적으로 사용되는 재료로서, 여기에 사용되는 도재는 심미적 수복재료로서의 장점뿐 만 아니라 생체적합성과 광투과성이 높아 1887년 Land에 의해 소개 된 이후 임상에서 많이 사용되어 왔다. 최근에는 환자들의 심미적, 기능적 요구가 증대되어 파절이 쉽게 일어나는 도재의 단점을 보완하고자 합금을 이용한 금속-도재관의 제작이 일반화 되어있다(Jeoung et al. | |
금속-도재관의 도재는 어떤 장단점을 가지고 있는가? | 금속-도재관은 금속 코어 위에 자연치아와 유사한 결정화 유리가 상부구조로 올라가기 때문에 기존의 자연치아와 비슷한 심미적 효과를 낸다. 또한 금속 코어의 치수 치밀성, 얇은 두께에 의한 변연 부위의 뛰어난 적합성 등을 갖는다(Pettenò et al., 2000). 그러나 전부주조관은 인장강도가 낮은 것에 비해 상대적으로 취성이 높기 때문에 하부금속을 강화하여 단점을 보완하고 있다. | |
열가압성형방식은 어떤 장점이 있는가? | 열가압성형방식은 도재 신터링 과정 중 고온 퍼니스에 의해 대기가스가 차단되므로 금속 하부구조(framework)에 해로운 산화막이 거의 형성되지 않는 등의 장점이 있다. 또한 퍼니스에 직접 도재를 소결하는 기존의 도재 성형방식에 비해 제조공정이 정확하며 변연적합도, 굴곡강도 또한 우수하다는 장점도 있다(Gorman et al. |
Albakry M, Guazzato M, Swain MV. Biaxial flexural strength, elastic moduli, and x-ray diffraction characterization of three pressable all-ceramic materials. J Prosthet Dent, 89(4), 374-380, 2003.
Al-Dohan HM, Yaman P, Dennison JB, Razzoog ME, Lang BR. Shear strength of coreveneer interface in bi-layered ceramics. J Prosthet Dent, 91(4), 349-355, 2004.
Anusavice KJ, Shen C, Rawls HR. Phillips' science of dental materials. Elsevier Health Sciences, 2013.
Chu S. Current clinical strategies with lithiumdisilicate restorations. Compend Contin Educ Dent, 33(1) 64, 6-7, 2012.
Craig RG. Mechanical properties in restorative dental materials. 11th ed, 551-92, 2002.
Fonseca JC, Henriques GEP, Sobrinho LC, de Goes MF. Stress-relieving and porcelain firing cycle influence on marginal fit of commercially pure titanium and titanium - aluminum - vanadium copings. Dent Mater, 19(7), 686-691, 2003.
Gorman C, McDevitt W, Hill R. Comparison of two heat-pressed all-ceramic dental materials. Dent Mater, 16(6), 389-395, 2000.
Holand W, Schweiger M, Frank M, Rheinberger V. A comparison of the microstructure and properties of the IPS $Empress^{(R)}$ 2 and the IPS $Empress^{(R)}$ glass-ceramics. J Biomed Mater Res, 53(4), 297-303, 2000.
International standard Organisation. ISO9693-1: Metal-ceramic dental restorative systems. 2012.
Ishibe M, Raigrodski AJ, Flinn BD, Chung KH, Spiekerman C, Winter RR. Shear bond strengths of pressed and layered veneering ceramics to high-noble alloy and zirconia cores. J Prosthet Dent, 106(1), 29-37, 2011.
Jeoung SH, Bae JM, Oh SH. Effect of Chemical Treatment on the Bond Strength Between Zirconia and Veneer Ceramics. J Korean Res Soe Dent Mater, 12;39(4):269-276, 2012.
Lee BJ. Shear bond strengths of ceramic to a soft milling cobalt-chromium alloy and a base metal casting alloy. Department of dentistry Graduate School, Kyungpook National University, 2014.
McLaren EA, Whiteman YY. Ceramics: rationale for material selection. Compend Contin Educ Dent, 31(9), 666-668, 2010.
Niedermeier W, Dentb M. Clinical study on the reasons for and location of failures of metal-ceramic restorations and survival of repairs. J Prosthodont, 15(3), 299-302, 2002.
Petteno D, Schierano G, Bassi F, Bresciano ME, Carossa S. Comparison of marginal fit of 3 different metal-ceramic systems: an in vitro study. Int J Prosthodont, 13(5), 405-408, 2000.
Schaerer P, Sato T, Wohlwend A. A comparison of the marginal fit of three cast ceramic crown systems. J Prosthet Dent, 59(5), 534-542, 1988.
Sundh A, Sjogren G. A comparison of fracture strength of yttrium-oxide-partially-stabilized zirconia ceramic crowns with varying core thickness, shapes and veneer ceramics. J Oral Rehabil, 31(7), 682-688, 2004.
White S, Miklus V, McLaren E, Lang L, Caputo A. Flexural strength of a layered zirconia and porcelain dental all-ceramic system. J Prosthet Dent, 94(2), 125-131, 2005.
Zanotto ED. Bright future for glass-ceramics. Am Ceram Soc Bull, 89(8), 19-27, 2010.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.