최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국재난정보학회논문집 = Journal of the Society of Disaster Information, v.13 no.2 = no.36, 2017년, pp.147 - 154
Jeon, Juntai (Department of Civil & Environmental Engineering, Inha Technical College)
Duplex stainless steel finds increasing use as an alternative to austenitic stainless steel, particularly where chloride or sulphide stress corrosion cracking is of primary concern, due to the excellent combination of strength and corrosion resistance. During welding, duplex stainless steel does not...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
듀플렉스 스테인리스강의 특징은? | 하지만, 지난 20년간 스테인리스강에 대한 많은 연구로 인해 새로운 설계기준이 등장하고, 스테인리스강에 대한 이해의 폭이 커지고, 유지관리의 중요성이 대두 되면서 스테인리스강을 건설 분야에 적용하려는 움직임이 커지고 있다. 최근에는 일반 오스테나이트계 스테인리스강의 조직인 오스테나이트(austenite)와 탄소강의 주 조직인 페라이트(ferrite)가 거의 동일하게 섞여 있는 듀플렉스(duplex) 스테인리스강이 개발되어 각종 산업분야에서 적용되고 있으며 건설 분야에서도 일부 적용이 되고 있다(Díaz et al., 2010; Iris, 2008; Mourad et al. | |
용접의 장점은? | 일반 구조용 강재와 마찬가지로 듀플렉스 스테인리스강을 이용한 구조물 제작 시에는 필연적으로 용접이 이루어져야 한다. 용접은 고효율성 및 저비용 등의 장점으로 인하여 강 교량, 배, 자동차 등과 같은 많은 산업분야에서 폭넓게 사용되어지고 있다. 그러나, 용접 시에는 용접열이 국부적으로 가해짐으로 인해 온도 차이가 발생하며, 이 온도차로 인해 국부적인 소성변형이 발생하여 필연적으로 용접잔류응력이 발생하게 된다. | |
건설 분야에서 스테인리스강의 주재료로서의 적용이 특수 구조물에 제한되어온 이유는? | 결과적으로 스테인리스강의 주재료로서의 건설 분야에 적용은 특수 구조물에 제한되어 왔다. 이는 스테인리스강에 대한 이해부족, 제한된 설계기준과 표준화의 부재, 그리고 높은 초기비용 등의 이유 때문이었다. 하지만, 지난 20년간 스테인리스강에 대한 많은 연구로 인해 새로운 설계기준이 등장하고, 스테인리스강에 대한 이해의 폭이 커지고, 유지관리의 중요성이 대두 되면서 스테인리스강을 건설 분야에 적용하려는 움직임이 커지고 있다. |
Anderson, B.A.B. (1978). "Thermal Stresses in a Submerged-Arc Welded Joint Considering Phase Transformation." Transaction of ASME, Vol.100, pp.110-123.
Chang, K.H., Lee, J.H. (2002). "Analysis of Residual Stress in Welds Composed by Dissimilar Steels under Tensile Loads." Journal of the Korean Society of Civil Engineers, Vol.22, No.2-A, pp.201-210.
Chang, K.H., Lee, J.H. (2003). "Characteristics of Residual Stress in Welds Composed of Similar or Dissimilar Steels." Journal of Korean Society of Steel Construction, Vol.15, No.3, pp.241-250.
Diaz, J.J. del Coz., Menendez Rodriguez, P., Garcia Nieto, P.J., Castro-Fresno, D. (2010). "Comparative analysis of TIG welding distortions between austenitic and duplex stainless steels by FEM." Applied Thermal Engineering, Vol.30, pp.2448-2459.
Iris, A-A. (2008). "Duplex stainless steels: brief history and some recent alloys." Recent Patents on Mechanical Engineering, Vol.1, pp.51-57.
Mourad, A-H.I., Khourshid, A., Sharef, T. (2012) "Gas tungsten arc and laser beam welding processes effects on duplex stainless steel 2205 properties." Materials Science Engineering A Vol.549, pp.105-113.
Satoh, K., Terasaki, T. (1976). "Effect of transformation expansion on welding residual stresses distributions and welding deformation." Journal of JWS, Vol.45, No.7, pp.560-566.
Satoh, K., Terasaki, T. (1976). "Effect of welding condition on residual stresses distribution in welded structures materials." Journal of JWS, Vol.45, pp.150-156.
Withers, P.J. (2007). "Residual stress and its role in failure." Reports on Progress in Physics, Vol.70, pp.2211-2264.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.