최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Fashion & textile research journal = 한국의류산업학회지, v.19 no.3, 2017년, pp.344 - 352
This study investigated the formability and appearance performance of 20 women's worsted fabrics. For this purpose, 10 foreign fabrics (9 Italian + 1 Japan fabrics) were prepared and 10 domestic worsted fabrics for women were made in Cheil woolen textile company for comparing with foreign fabrics. T...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
소재의 고급화를 위해 중요한 것은? | 새로운 라이프 스타일이 대두되면서 이에 적합한 착용감이 좋은 고감성 소재에 대한 욕구가 증가하여 소재의 고급화를 추구하는 경향이 점점 높아지고 있다. 소재의 고급화를 위해서는 착용과정에서 발생하는 의류의 외관을 나쁘게 하는 물성변화, 즉 심퍼커링, 필링, 수축률 변화에 따른 형태안정성, 구김 그리고 의류의 형태 변형 등이 발생하지 않는 것이 대단히 중요하다. 그러나 이들 물성의 평가는 객관적인 수치로 표현하기 어려우며 표준시료와 비교하는 시험방법을 채택함에 따라 평가의 명확성이 다소 문제가 되며, 이러한 물성을 예측하고 불량 특성의 발생을 줄여 줄 수 있는 방법에 대한 구체적인 처방을 찾는 데에 어려움을 겪어왔다. | |
소모직물의 물성과 성능을 예측하기 위한 시스템을 인공 신경망을 사용한 연구에는 어떤 것들이 있는가? | Dastoor et al.(1994a, b, c)은 직물의 설계 CAD시스템에 관한 연구에서 FABCAD로 불리는 프로토타입 전문가시스템에 관한 연구결과를 발표하였다. Fan et al.(1998a, b)은 소모직물의 공학적 설계 전문가 시스템에 관한 연구에서 WOFAX로 불리는 연구계획을 발표하였다. 이들은 소모직물의 물성과 성능을 예측하기 위한 시스템을 인공 신경망(neural network)을 사용하여 분석하였다. | |
의류 소재의 고급화가 추구되는 이유는? | 새로운 라이프 스타일이 대두되면서 이에 적합한 착용감이 좋은 고감성 소재에 대한 욕구가 증가하여 소재의 고급화를 추구하는 경향이 점점 높아지고 있다. 소재의 고급화를 위해서는 착용과정에서 발생하는 의류의 외관을 나쁘게 하는 물성변화, 즉 심퍼커링, 필링, 수축률 변화에 따른 형태안정성, 구김 그리고 의류의 형태 변형 등이 발생하지 않는 것이 대단히 중요하다. |
Dastoor, P. H., Hersh, S. P., Batra, S. K., & Rasdorf, W. J. (1994a). Computer-assisted structural design of industrial woven fabrics Part I: Need, scope, background, and system architecture. Journal of the Textile Institute, 85(2), 89-109. doi:10.1080/00405009408659014
Dastoor, P. H., Hersh, S. P., Batra, S. K., & Rasdorf, W. J. (1994b). Computer-assisted structural design of industrial woven fabrics Part II: System operation, heuristic design. Journal of the Textile Institute, 85(2), 110-134. doi:10.1080/00405009408659015
Dastoor, P. H., Ghosh, T. K., Batra, S. K., & Hersh, S. P. (1994c). Computer-assisted structural design of industrial woven fabrics part III: modelling of fabric uniaxial/biaxial load-deformation. Journal of the Textile Institute, 85(2), 135-157. doi:10.1080/00405009408659016
Gaudreau, E., & Agatstein, S. (1989). The CSIRO division of wool technology. Fabric assurance by simple testing instruction manual.
Fan, J., & Hunter, L. (1998a). A worsted fabric expert system Part I: System development. Textile Research Journal, 68(9), 680-686. doi:10.1177/004051759806800909
Fan, J., & Hunter, L. (1998b). A worsted fabric expert system: Part II: An artificial neural network model for predicting the properties of worsted fabrics. Textile Research Journal, 68(10), 763-771. doi:10.1177/004051759806801010
Gong, R. H., & Chen, Y. (1999). Predicting the performance of fabrics in garment manufacturing with artificial neural networks. Textile Research Journal, 69(7), 477-482. doi:10.1177/004051759906900703
Harada, T., & Saito, M. (1988). Inspection system of hand HIPS. The Textile Machinery Society of Japan, 45(5), 305-310.
Hu, J., Xin, B., & Yan, H. (2002a). Measuring and modeling 3D wrinkles in fabrics. Textile research journal, 72(10), 863-869. doi.org/10.1177/004051750207201003
Hu, J., Xin, B., & Yan, H. J. (2002b). Classifying fleece fabric appearance by extended morphological fractal analysis. Textile Research Journal, 72(10), 879-884. doi:10.1177/004051750207201005
Kawabata, S. (1980). The standardization and analysis of hand evaluation (2nd ed.) : The hand evaluation and standardization committee. Osaka: The Textile Machinery Society of Japan.
Kang, T. J., Kim, S. C., Sul, I. H., Youn, J. R., & Chung, K. (2005). Fabric surface roughness evaluation using wavelet-fractal method part I: wrinkle, smoothness and seam pucker. Textile Research Journal, 75(11), 751-760. doi:10.1177/0040517505058855
Kim, S. A., & Gotoh, D. (2005). The characteristics and application of 3D CAD. Journal of the Korean Society of Clothing Industry, 7(2), 131-134.
Kim, S. C., & Kang, T. J. (2005). Fabric surface roughness evaluation using wavelet-fractal method part II: Fabric pilling evaluation. Textile Research Journal, 75(11), 761-770. doi:10.1177/0040517505059209
Kyohei, T., Toyonori, N., Hiroyuki, K., Satoshi, A., Junki, K., & Kiyohiro, S. (2015). Influence of physical properties of wool fabrics on the poor appearance of jacket. Journal of Textile Engineering, 61(2), 17-21. doi: 10.4188/jte.61.17
Lindberg, J., Behre, B., & Dahlberg, B. (1961). Part III: Shearing and buckling of various commercial fabrics. Textile Research Journal, 31(2), 99-122.
Ly, N. G., & De Boos, A. G. (1990). Application of the FAST system to the manufacture of fabrics and garments. English International Wool Textile Research. Society, 370-379.
Mahar, T. J., Dhingra, R. C., & Postle, R. (1989). Fabric mechanical and physical properties relevant to clothing manufacture part I: fabric overfeed, formability, shear and hygral expansion during tailoring. International Journal of Clothing Science & Technology, 1(1), 12-20. doi:org/10.1108/eb002941
Niwa, M., Inoue, M., & Kawabata, S. (2001). Objective evaluation of the handle of blankets. Textile Research Journal, 71(8), 701-710. doi: 10.1177/004051750107100809
Park, C. K., & Kang, T. J. (1999a). Objective evaluation of seam pucker using artificial intelligence. Part I : Geometric modeling of seam pucker. Textile Research Journal, 69(10), 735-742. doi: 10.1177/004051759906901006
Park, C. K., & Kang, T. J. (1999b). Objective evaluation of seam pucker using artificial intelligence. Part II : Method of evaluating seam pucker. Textile Research Journal, 69(11), 835-845. doi: 10.1177/004051759906901107
Park, C. K., & Kang, T. J. (1999c). Objective evaluation of seam pucker using artificial intelligence. Part II : Using the objective evaluation method to analyze the effects of sewing parameters on seam pucker. Textile Research Journal, 69(12), 919-924. doi:10.1177/004051759906901206
Pavlinic, D. Z., Gersak, J., Demsar, J., & Bratko, I. (2006). Predicting seam appearance quality. Textile Research Journal, 76(3), 235-242. doi: 10.1177/0040517506061533
Postle, R., & Dhingra, R. C. (1989). Measuring and interpreting lowstress fabric mechanical and surface properties Part III: Optimization of fabric properties for men's suiting materials. Textile Research Journal, 59(8), 448-459. doi:10.1177/004051758905900803
Shishoo, R. L. (1989). Fabric properties and making up processes. Textile Asia, 20(2), 66-73.
Shishoo, R., & Choroszy, M. (1990). Fabric tailorability. Textile Asia, 2(12), 64-71.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.