$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

얇은 강판을 사용한 합성 보-기둥 외부접합부의 반복하중 실험
Cyclic Loading Tests of Exterior Composite Beam-to-Column Connections Using Thin Steel Plates

大韓建築學會論文集. Journal of the architectural institute of korea. 構造系, v.33 no.8 = no.346, 2017년, pp.11 - 19  

임종진 (단국대 건축구조 대학원) ,  김동관 (청주대 건축공학과) ,  이상현 (단국대 건축공학과) ,  엄태성 (단국대 건축공학과)

Abstract AI-Helper 아이콘AI-Helper

In the present study, exterior composite beam-to-column connections using thin steel plates were tested under cyclic loading. Octagonal steel tubes and U-section steel beams with a thickness of 6 mm were used for the composite column and beam, respectively. To transfer the tension force of beam flan...

주제어

참고문헌 (18)

  1. duPlessis, D. P., & Daniels, J. H. (1973). Strength of composite beam-to-column connections, Fritz Laboratory Reports. Paper 2035. 

  2. Tagawa, Y., Kato, B., & Aoki, H. (1989). Behavior of Composite Beams in Steel Frame Under Hysteretic Loading, Journal of Structural Division, ASCE, 115(8), 2029-2045. 

  3. Lee, S. J. (1987). Seismic Behavior of Steel Building Structures with Composite Slabs, ph. D. Dissertation, Department of Civil Engineering, Lehigh University, Bethlehem. 

  4. Alostaz, Y.M., & Schneider, S.P. (1996). Connections to concrete-filled steel tubes, A report on research sponsored by the National Science Foundation, University of Illinois at Urbana-Champaign, Illinois. 

  5. Lee, S. h., Jung, H. M., Kim, D. J., Kim, J. H., & Choi. S. M. (2008). Structural Characteristic of Welded Built-up Square CFT Column to Beam Connections with External Diaphragm, Journal of Korean Society of Steel Construction, KSSC, 11(1), 711-723. 

  6. Park, J. H., Kang, S. M., & Kim, U. J. (2003). Seismic Performance of Weld Flange Beam-to-Concrete Filled Tube Column Joints with Stiffening Plates around the Column, Journal of Korean Society of Steel Construction, KSSC, 15(2), 167-175. 

  7. Shin, K. J., Kim, Y. J., Oh Y. S., & Moon, T. S. (2004). Behavior of welded CFT column to H-beam connections with external stiffeners, Journal of Engineering Structures, 26(13) 1877-1887 

  8. Chen, C.-C., Lin, C.-C., & Tsai, C.-L. (2004). Evaluation of reinforced between steel beams and box columns, Journal of Engineering Structures, 26, 1889-1904. 

  9. Shanmugan, N.E., Ting, L.C., & Lee, S.L. (1991). Behavior of I-beam to box-column connections stiffened externally and subjected to fluctuating loads, Journal of Constructional Steel Research, 20(2), 129-148. 

  10. Beutel, J., Thambiratnam, D., & Perera, N. (2002). Cyclic behavior of concrete filled steel tubular column to steel beam connections, Journal of Engineering Structures, 24(1), 29-38. 

  11. Azizinamini, A. & Prakash, B. (1993). A tentative Design Guidelines for a New Steel Beam Connection Detail to Composite Tube Columns, AISC Engineering Journal, 3rd quarter, 108-115. 

  12. Morino, S., & Tsuda, K. (2003). Design and construction of concrete-filled steel tube column system in Japan, Earthquake Engineering and Engineering Seismology, 4(1), 51-73. 

  13. Wu, L.Y., Chung, L.L., & Tsai, S. F. (2005). Seismic behavior of bolted beam-to-column connections for concrete filled steel tube, Journal of Constructional Steel Research, 61(10), 1387-1410. 

  14. Mirghaderi, S.R., Torabian, S., & Keshavarzi, F. (2010). I-beam to box-column connection by a vertical plate passing through the column, Journal of Engineering Structures, 32(8), 2034-2048. 

  15. America Institute of Steel Construction (2010). Specification for Structural Steel Buildings, ANSI/AISC 360-10, Chicago, IL. 

  16. America Institute of Steel Construction (2010). Prequalified Connections for Special and Intermediate Steel Moment Frames for Seismic Applications, ANSI/AISC 358-10, Chicago, IL, 2010. 

  17. The Europen Standard (2004). Eurocode 8, Design of structures for earthquake resistance, BS EN 1988-1. 

  18. Korea Concrete Institute (2012). Design Code for Concrete Structures. 

LOADING...
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로