최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국섬유공학회지 = Textile science and engineering, v.54 no.4, 2017년, pp.292 - 299
이효정 (충남대학교 생활과학연구소) , 엄란이 (충남대학교 의류학과) , 이예진 (충남대학교 의류학과)
In this study, the physical properties of commercially available 3D spacer fabrics are analyzed, and their applicability to functional apparel is investigated. Six samples were prepared by purchasing four types of 3D spacer fabric with different thicknesses and surface structures (A1, B1, C1, and D1...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
3D 스페이서 패브릭과 관련된 연구 중 특수 기능복과 관련된 노력은 무엇인가? | 의류 분야에서도 3D 스페이서 패브릭에 대한 관심이 점점 증가하고 있는 추세이며 의복 아이템 중 인체의 기능향상이나 보호를 목적으로 하는 작업복, 보호복, 스포츠웨어 등 특수 기능복에서는 3D 스페이서 패브릭과 같은 다양한 융복합 신소재를 접목하여 의복의 기능을 극대화시키기 위한 노력이 이어지고 있다. 더불어 차세대 생산 기술 중 하나인 3D 프린팅 기술의 도입을 고려하여 특수 기능복의 스마트화를 논의하고 있다[10]. | |
3D 스페이서 패브릭은 일반적으로 어떤 특징으로 어디에 활용되는가? | 3D 스페이서 패브릭은 두 레이어의 직물 사이에 파일 얀이나 스페이서 얀을 연결해 입체적으로 구조화시킨 것으로 최근 이의 활용 가능성이 큰 이슈가 되고 있다[1,2]. 일반적으로 통기성과 압축저항성이 우수하다고 알려져 시트의쿠션재, 신발 및 스포츠용 소재 등 산업용 제품 등에 주로 사용되고 있고, 한편으로 충격흡수 및 내구성, 열과 수분배출이 뛰어나 일부 보호장구, 보호복 및 속옷 등에도 활용되고 있다[3−7]. 또한 3D 스페이서 패브릭은 직조형태, 단층 구조, 두께, 레이어의 소재 등을 변화시킴에 따라 그에 따른 물성이 달라지기 때문에 다양한 재료로써 적용할 수 있는 가능성이 매우 높은 특징이 있다. | |
3D 스페이서 패브릭이 다양한 재룔로써 적용할 가능성이 높은 이유는? | 일반적으로 통기성과 압축저항성이 우수하다고 알려져 시트의쿠션재, 신발 및 스포츠용 소재 등 산업용 제품 등에 주로 사용되고 있고, 한편으로 충격흡수 및 내구성, 열과 수분배출이 뛰어나 일부 보호장구, 보호복 및 속옷 등에도 활용되고 있다[3−7]. 또한 3D 스페이서 패브릭은 직조형태, 단층 구조, 두께, 레이어의 소재 등을 변화시킴에 따라 그에 따른 물성이 달라지기 때문에 다양한 재료로써 적용할 수 있는 가능성이 매우 높은 특징이 있다. |
M. Abounaim, G. Hoffmann, O. Diestel, and C. Cherif, "Thermoplastic Composite from Innovative Flat Knitted 3D Multi-layer Spacer Fabric Using Hybrid Yarn and the Study of 2D Mechanical Properties", Comp. Sci. Tech., 2010, 70, 363-370.
H. Erth and B. Gulich in "Textile Advances in the Automotive Industry" (R. Shishoo Ed.), Woodhead Publishing Limited, Cambridge, 2008, pp. 140-149.
W. Y. Jeong, D. Y. Lim, and Y. C. Park, "Comparative Study on the Physical Properties of 3D-Spacer Fabrics-Applications of Cushioning Materials for Automotive Seat", Text. Sci. Eng., 2010, 47, 291-297.
J. Yip and S. P. Ng, "Study of Three-dimensional Spacer Fabrics: Physical and Mechanical Properties", J. Mater. Proc. Tech., 2008, 206, 359-364.
M. Abounaim, G. Hoffmann, O. Diestel, and C. Cherif, "Development of Flat Knitted Spacer Fabrics for Composites Using Hybrid Yarns and Investigation of Two-Dimensional Mechanical Properties", Text. Res. J., 2009, 79, 596-610.
J. H. Park, J. S. Lee, and J. R. Lee, "Characteristic Evaluation of Impact Absorption Materials for the Development of Fall Impact Protective Pants", J. Kor. Soc. Cloth. Text., 2006, 40, 495-505.
Y. Liu, H. Hu, H. Long, and L. Zhao, "Impact Compressive behavior of Warp-knitted Spacer Fabrics for Protective Applications", Text. Res. J., 2012, 82, 773-788.
S. Kim and Y. L. Choi, "Introduction of 3D Printing Technology into the Fashion Industry", Technical Design & Global Fashion, 2016, 13, 60-65.
K. Machova, P. Klug, M. Waldmann, G. Hoffmann, and C. Cherif, "Determining of the Bending Strength of Knitted Spacer Fabrics", Melliand's Textilberichte, 2006, 87, E93.
S. Raz, "Flat Knitting Technology", Universal Maschinenfabrik. Westhausen, 1993.
P. Zhang, R. H. Gong, Y. Yanai, and H. Tokura, "Effects of Clothing Material on Thermoregulatory Responses", Text. Res. J., 2002, 72, 83-89.
S. Baxter, "The Thermal Conductivity of Textiles", Proc. Phys. Soc., 1946, 58, 105.
ASHRAE, American Society of Heating, Refrigerating and Air-Conditioning Engineers, "ASHRAE Handbook-Fundamentals", Atlanta, 1993.
R. S. Grewal and P. Banks-Lee, "Development of Thermal Insulation for Textile Wet Processing Machinery Using Needlepunched Nonwoven Fabrics" Int. Nonwovens J., 1999, 8, 61-66.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.