최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.16 no.4, 2017년, pp.9 - 15
이성윤 (한국생산기술연구원 극한가공기술그룹) , 이인규 (한국생산기술연구원 극한가공기술그룹) , 정명식 (한국생산기술연구원 극한가공기술그룹) , 이재욱 (한국생산기술연구원 극한가공기술그룹) , 이선봉 (계명대학교 기계자동차공학과) , 이상곤 (한국생산기술연구원 극한가공기술그룹)
In hot forming process, the dies in which excessive worn or crack occurs is reused after repair. Generally hot forming dies are recycled through a welding repair method. Welding repair methods are highly dependent on the skills of engineer. It causes process defects such as dimensional defects and s...
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
금형수명은 어떠한 것에 영향을 미치는가? | 열간단조(hot forging), 압출(extrusion), 압연(rolling) 등의 열간성형공정의 경우 작업 온도가 높고 금형의 온도변화가 심하기 때문에 금형의 수명이 짧다. 금형수명은 제품 품질, 생산성, 생산비용 등에 매우큰 영향을 미치는 요소이다 [1] . 온도 영향을 받는 금형은 연삭마모(abrasive wear)에 의해 수명이 결정되며, 제품의 형상 및 구조가 복잡한 경우 높은 면압으로 인해 과도한 연삭마모가 발생된다. | |
마모가 발생한 열간성형용 금형을 보수하는 대표적인 방법은 무엇인가? | 일반적으로 마모가 발생한 열간성형용 금형의 경우 금형제조비용 저감을 위해 마모발생 부위에 대한 보수작업 후 재사용되고 있다. 마모부위를 용접 육성하여 재사용하는 것이 가장 대표적인 보수 방법이다. 그러나 Fig. | |
열간단조, 압출, 압연 등의 열간성형공정의 단점은 무엇인가? | 열간단조(hot forging), 압출(extrusion), 압연(rolling) 등의 열간성형공정의 경우 작업 온도가 높고 금형의 온도변화가 심하기 때문에 금형의 수명이 짧다. 금형수명은 제품 품질, 생산성, 생산비용 등에 매우큰 영향을 미치는 요소이다 [1] . |
Akhtar, S. S. and Arif, A. F. M., "Fatigue Failure of Extrusion Dies: Effect of Process Parameters and Design Features on Die Life", International Journal of Failure Analysis and Prevention, Vol. 10, No. 1, pp. 38-49, 2010.
Kashani, H., Amadeh, A. and Ghasemi, H., "Room and High Temperature Wear Behaviors of Nickel and Cobalt Base Weld Overlay Coatings on Hot Forging Dies", Wear, Vol. 262, No. 7-8, pp. 800-806, 2007.
Ebara, R. and Kubota, K., "Failure Analysis of Hot Forging Dies for Automotive Components", Engineering Failure Analysis, Vol. 15, No. 7, pp. 881-893, 2008.
Jang, J. H., Joo, B. D., Mun, S. M., Sung, M. Y. and Moon, Y. H., "Application of Direct Laser Melting to Restore Damaged Steel Dies", Metals and Materials International, Vol. 17, No. 1, pp. 167-174, 2011.
Zhang, Y. Z., Liu, Y. T., Zhao, X. H. and Tang, Y. J., "The Interface Microstructure and Tensile Properties of Direct Energy Deposited TC11/ $Ti_2AlNb$ Dual Alloy", Materials & Design, Vol. 110, No. 15, pp. 571-580, 2016.
Shim, D. S., Baek, G. Y., Seo, J. S., Shin, G. Y., Kim, K. P. and Lee, K. Y., "Effect of Layer Thickness Setting on Deposition Characteristics in Direct Energy Deposition (DED) Process", Optics & Laser Technology, Vol. 86, pp. 69-78, 2016.
Selcuk, C., "Laser Metal Deposition for Powder Metallurgy Parts", Powder Matallurgy, Vol. 54, No. 2, pp. 94-99, 2011.
Mazumder, J., Choi, J., Nagarathnam, K., Koch, J. and Hetzner, D., "The Direct Metal Deposition of H13 Tool Steel for 3-D Components", JOM, Vol. 49, No. 5, pp. 55-60, 1997.
Jang, J. H., Joo, B. D., Van Tyne, C. J. and Moon, Y. H., Characterization of Deposited Layer Fabricated by Direct Laser Melting Process, Metals and Materials International, Vol. 19, No. 3, pp. 497-506, 2013.
Park, J. S., Park, J. H., Lee, M. G, Sung, J. H., Cha, K. J. and Kim D. H., "Effect of Energy Input on the Characteristic of AISI H13 and D2 Tool Steels Deposited by a Directed Energy Deposition Process", Metallurgical and Materials Transactions A, Vol. 47, No. 5, pp. 2529-2535, 2016.
Ahn, D. G., Lee, H. J., Cho, J. R. and Guk, D. S., "Improvement of the Wear Resistance of Hot Forging Dies using a Locally Selective Deposition Technology with Transition Layers", CIRP Annals - Manufacturing Technology, Vol. 65, No. 1, pp. 257-260, 2016.
Park, J. S., Lee, M. G., Cho, Y. J., Sung, J. H., Jeong, M. S., Lee, S. K., Choi, Y. J. and Kim, D. H., "Effect of Heat Treatment on the Characteristics of Tool Steel Deposited by The Directed Energy Deposition Process", Metals and Materials International, Vol. 22, No. 1, pp. 143-147, 2016.
Choi, J. W. and Kim, H. C., "3D Printing Technology - A Review", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 3, pp. 1-8, 2015.
Kim, W. S., Hong, M. P, Park, J. S., Lee, Y. S., Cha, K. J., Sung, J. H., Jung, M. W. and Lee, Y. H., "Case Studies on Applications of Conformal Cooling Channel based on DMT Technology", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 3, pp. 9-14, 2015.
Pyo J. H., Yoo C. J., Shin J. K., Lee T. G., Shin B. S., "A Study on the Design of Hiking Boots Equipped with GPS and its Midsole Manufactured by 3D Porous Polymer Printing Method", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 6, pp. 83-88, 2016.
Kang B. S., Ahn D. G., Shin B. S., Shin J. K., "A Fundamental Study on Polymer/Metal Additive Method using a UV Laser for Consumer-oriented 3D Helmet Products", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 6, pp. 89-94, 2016.
Carroll, B. E., Palmer, T. A. and Beese, A. M., "Anisotropic tensile behavior of Ti-6Al-4V Components Fabricated with Directed Energy Deposition Additive Manufacturing", Acta Materialia, Vol. 87, pp. 309-320, 2015.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.