최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.16 no.4, 2017년, pp.83 - 88
박동섭 (경북대학교 대학원 기계공학과) , 정영훈 (경북대학교 기계공학부)
Recently, the use of advanced materials with light weight significantly increases because of global regulation on CO2 emission. Especially, CFRP (carbon fiber reinforced plastics) one of the most promising advanced materials. Since CFRP has pretty higher strength per unit weight than steel, it is on...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
탄소섬유복합재 가공 시 문제는 무엇이 있는가 | 탄소섬유복합재의 가공 시 가장 큰 문제는 박리, 섬유돌출 등에 의한 가공품의 불량 문제와 높은 공.구 마모로 인한 가공품질 저하 및 비용 증가 등이다. 특히 공구 마모는 공구비용을 높이는 동시에 절삭부하를 증가시키고 이로 인해 박리와 섬유돌출현상이 현저하게 증가되는 문제를 야기한다. | |
탄소섬유복합재가 각광 받는 이유는 무엇인가 | 특히, 탄소섬유복합재(Carbon Fiber Reinforced Plastics, CFRP)는 항공기 분야에서는 그 활용도가 이미 매우 높으며, 최근 자동차 분야에서의 활용이 급격히 증가하는 추세에 있다. 탄소섬유복합재가 각광 받고 있는 가장 큰 이유는 초경량, 고강도의 소재이기 때문이다.[1] 그러나 탄소섬유를 적층하여 만든 소재이기 때문에 일반 소재들과 달리 특이한 가공 특성을 보여 가공에 어려움을 겪고 있다. | |
탄소섬유복합재의 단점은 무엇인가 | 탄소섬유복합재가 각광 받고 있는 가장 큰 이유는 초경량, 고강도의 소재이기 때문이다.[1] 그러나 탄소섬유를 적층하여 만든 소재이기 때문에 일반 소재들과 달리 특이한 가공 특성을 보여 가공에 어려움을 겪고 있다. |
Wang, X., Kwon, P. Y., Sturtevant, C., Kim, D. W., Lantrip. J., "Tool wear of coated drills in drilling CFRP", Journal of Manufacturing Processes, Vol. 15, No. 1, pp. 127-135, 2013.
Park, J. N., Jeong, S. T., and Cho, G. J., "A Study on the Machining Characteristics in GFRP Using HSS Tools", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 2, No. 2, pp 37-44, 2003.
Rawat, S. and Attia, H., "Wear mechanisms and tool life management of WC-Co drills during dry high speed drilling of woven carbon fibre composites", Wear, Vol. 267, No. 5, pp. 1022-1030, 2009.
Iliescu, D., Gehin, D., Gutierrez, M. E. and Girot, F., "Modeling and tool wear in drilling of CFRP", International Journal of Machine Tools and Manufacture, Vol. 50, No. 2, pp. 204-213, 2010.
Won, S. J., Li, C. P., Park, K. M. and Ko, T. J., "The Exit Hole Burr Generation of CFRP with Ultrasonic Vibration", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 1, pp. 134-140, 2017.
Gaugel, S., Sripathy, P., Haeger, A., Meinhard, D., Bernthaler, T., Lissek, F., Kaufeld, M., Knoblauch, V., Schneider, G., "A comparative study on tool wear and laminate damage in drilling of carbon-fiber reinforced polymers (CFRP)", Composite Structures, Vol. 155, pp. 173-183, 2016.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.