최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.16 no.4, 2017년, pp.89 - 96
최두순 (한국교통대학교 기계자동차항공공학부) , 최우석 (한국교통대학교 기계자동차항공공학부)
A cable tray is a structure made of metal or a non-combustible material that supports cables in the electrical wiring of buildings. Cable trays should be developed to meet the various requirements of the construction site. In this study, a design system was developed to calculate the maximum support...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
케이블 트레이는 무엇인가? | 케이블 트레이는 건물의 배선 (cable tray) 시공 시 케이블이나 전력관을 지지 및 보호하기 위한 지지 구조물이다 . Fig. | |
케이블 트레이는 어떻게 제작되는가? | 대부분의 케이블 트레이는 아연 도금 강판이나 스테인리스 강판 등의 판재를 굽힘 성형하여 (bending) 제작된다 케이블 트레이가 지지하중 처짐량 등의 기계적 요구조건을 만족시키기 위해서는 충분한 굽힘 강도와 굽힘 강성을 확보해야 하며 이는 단면형상에 좌우된다 사다리형의 경우 측면 레일의 단면형상 바닥밀폐형이나 펀칭형의 경우 전체 단면형상의 설계가 중요하다. | |
케이블 트레이는 형태에 따라 어떻게 분류되는가? | Fig. 1과 같이 형태에 따라 길이 방향의 양측면 레일 을 각각의 (siderail) 가로 방향 부재로 (rung) 연결한 사다리형(ladder type), 일체식 또는 분리식 직선 방향 측면 레일에서 바닥 통풍구가 없는 바닥밀폐형(solid-bottom type), 바닥 통풍구가 있는 펀칭형(ventilated type)으로 분류된다[1-4]. 케이블 트레이 시장의 최근 경향은 기업이 판매하는 제품 중 선택하여 구매하던 방식에서 소비자의 다양한 요구 조건을 만족하는 케이블 트레이 제작하는 방식으로 변화하고 있다 시공 현장마다 사용하는 케이블의 종류 및 양 지지대 사이의 간격 등이 다양하게 변하므로 다양한 요구 조건에 맞는 케이블 트레이의 설계 및 제작이 필요하다[5]. |
Steward, W. E. and Beck, R. A., Modern Wiring Practice, Newnes, pp. 266-272, 2010.
Eder, S. J. and Yanev, P. I., "Evaluation of Cable Tray and Conduit Systems Using the Seismic Experience Data Base", Nuclear Engineering and Design, Vol. 107, No. 1-2, pp. 149-153, 1988.
Kar, A. K., "Cable Trays and their Supports", Proceedings of Second ASCE Conference on Civil Engineering and Nuclear Power, Vol. 1, Paper 11-8, 1980.
Reigles, D. G., Brachmann, I., Johnson, W. H. and Gurbuz, O., "Test-based Approach to Cable Tray Support System Analysis and Design: Behavior and Test Methods", Nuclear Engineering and Design, Vol. 302, Part A, pp. 27-36, 2016.
Smith, P. D., Eder, S. J. and Conoscente, J. P., "SQUG Cable Tray and Conduit Evaluation Procedure", Nuclear Engineering and Design, Vol. 123, No. 2-3, pp. 241-245, 1990.
"NEMA VE-1 - Metal Cable Tray Systems", National Electrical Manufacturers Association, pp. 5-9, 2009.
"Cable tray systems and cable ladder systems for cable management", British Standards Institution, pp. 5-13, 2002.
Park, H. G., Jang, J. S., Yoo, W. S., Kim, M. S., Lee, H. J. and Lee, J. W., "Development of a Design Support Program for Pivot Points of Working Devices in Construction Equipment using Planar Multi-body Dynamic Analysis", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 6, pp. 49-56, 2015.
Byon, S., Lee, D. and Choi, H., "Design of Railway Vehicle Wheel Profile Suitable for Dual-rail Profile", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 3, pp. 30-37, 2017.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.