$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

Bow hull-form optimization in waves of a 66,000 DWT bulk carrier 원문보기

International journal of naval architecture and ocean engineering, v.9 no.5, 2017년, pp.499 - 508  

Yu, Jin-Won (Global Core Research Center for Ships and Offshore Plants, Pusan National University) ,  Lee, Cheol-Min (Department of Naval Architecture and Ocean Engineering, Pusan National University) ,  Lee, Inwon (Department of Naval Architecture and Ocean Engineering, Pusan National University) ,  Choi, Jung-Eun (Global Core Research Center for Ships and Offshore Plants, Pusan National University)

Abstract AI-Helper 아이콘AI-Helper

This paper uses optimization techniques to obtain bow hull form of a 66,000 DWT bulk carrier in calm water and in waves. Parametric modification functions of SAC and section shape of DLWL are used for hull form variation. Multi-objective functions are applied to minimize the wave-making resistance i...

주제어

참고문헌 (34)

  1. Bagheri, H., Ghassemi, H., Dehghanian, A., 2014. Optimizing the seakeeping performance of ship hull forms using genetic algorithm. Int. J. Mar. Navigation Soc. Sea Transp. 8 (1), 49-57. 

  2. Berg, T.E., Berge, B.O., Honninen, S., Suojanen, R.A., Borgen, H., 2011. Design considerations for an arctic intervention vessel. In: Proceedings of Arctic Technology Conference. Houston, Texas, USA. 

  3. Blok, J.J., 1983. The Resistance Increase of a Ship in Waves. PhD thesis. Delft University ofTechnology. 

  4. Buchner, B., 1996. The influence of the bow shape of FPSOs on drift forces and green water. In: Proceedings of the Offshore Technology Conference, No. 8073, Houston, Texas, 6-9 May, 1996. 

  5. Campana, E.F., Liuzzi, G., Lucidi, S., Peri, D., Piccialli, V., Pinto, A., 2009. New global optimization methods for ship design problems. Optim. Eng. 10, 533-555. 

  6. Chun, H.H., 1992. On the added resistance of SWATH ship in waves. J. Soc. Nav. Archit. Korea 29 (4), 75-86 [in Korean]. 

  7. Ebira, K., Iwasaki, Y., Komura, A., 2004. Development of a new stem to increase the propulsive performance of LPG carriers. J. Kansai Soc. Nav. Archit. 241, 25-32 [in Japanese]. 

  8. Fang, M.C., Lee, Z.Y., Huang, K.T., 2013. A simple alternative approach to assess the effect of the above-water bow form on the ship added resistance. Ocean. Eng. 57, 34-48. 

  9. Gerritsma, J., Beukelman, W., 1972. Analysis of the resistance increase in waves of a fast cargo ship. Int. Shipbuild. Prog. 19, 285-293. 

  10. Grigoropoulos, G.J., Chalkias, D.S., 2010. Hull-form optimization in calm and rough water. J. Computer-Aided Des. 42 (11), 977-984. 

  11. Guo, B., Steen, S., 2011. Evaluation of added resistance of KVLCC2 in short waves. J. Hydrodyn. 23 (6), 709-722. 

  12. Hirota, K., Matsumoto, K., Takagishi, K., Yamasaki, K., Orihara, H., Yoshida, H., 2005. Development of bow shape to reduce the added resistance due to waves and verification of full scale measurement. In: Proceedings of the First International Conference on Marine Research and Transportation (ICMRT05), Ischia, Italy, September 19-21, 2005, pp. 63-70. 

  13. Hwang, S.H., Kim, J., Lee, Y.Y., Ahn, H.S., Van, S.H., Kim, K.S., 2013. Experimental study on the effect of bow hull forms to added resistance in regular head waves. In: Proceedings of the 12th International Symposium on Practical Design of Ships and Other Floating Structures(PRADS 2013), Changwon, Korea, October 20-25, pp. 39-44. 

  14. Hwang, S.H., Ahn, H.S., Lee, Y.Y., Kim, M.S., Van, S.H., Kim, K.S., Kim, J., Jang, Y.H., 2016. Experimental study on the bow hull-form modification for added resistance reduction in waves of KVLCC2. In: Proceedings of the 26th International Ocean and Polar Engineering Conference, Rhodes, Greece, June 26-July 1, pp. 864-868. 

  15. Jeong, K.L., Lee, Y.G., Yu, J.W., 2013. A fundamental study on the reduction of added resistance for KCS. In: Proceedings of the 12th International Symposium on Practical Design of Ships and Other Floating Structures( PRADS 2013), Changwon, Korea, October 20-25, pp. 23-30. 

  16. Kihara, H., Naito, S., Sueyoshi, M., 2005. Numerical analysis of the influence of above-water bow form on added resistance using nonlinear slender body theory. J. Ship Res. 49 (3), 191-206. 

  17. Kim, D.H., Kim, W.J., Van, S.H., 2000. Analysis of the nonlinear wavemaking problem of practical hull form using panel method. J. Soc. Nav. Archit. Korea 37 (4), 1-10 [in Korean]. 

  18. Kim, D.H., Kim, W.J., Van, S.H., Kim, H., 1998. Nonlinear potential flow calculation for the wave pattern of practical hull forms. In: Proceedings of the Third International Conference on Hydrodynamics (ICHD1998), Seoul, Korea. 

  19. Kim, H.J., Choi, J.E., Chun, H.H., 2016. Hull-form optimization using parametric modification functions and particle swarm optimization. J. Mar. Sci. Technol. 21, 129-144. 

  20. Kim, H.Y., Yang, C., Noblesse, F., 2010. Hull form optimization for reduced resistance and improved seakeeping via practical designed-oriented CFD tools. In: Proceedings of the Grand Challenges in Modeling & Simulation (GCMS'10), Ottawa, Canada, pp. 375-385. 

  21. Kuroda, M., Tsujimoto, M., Fujiwara, T., Ohmatsu, S., Takagi, K., 2008. Investigation on components of added resistance in short waves. J. Jpn. Soc. Nav. Archit. Ocean Eng. 8, 171-176. 

  22. Kuroda, M., Tsujimoto, M., Sasaki, N., Ohmatsu, S., Takagi, K., 2012. Study on the bow shapes above the waterline in view of the powering and greenhouse gas emission in actual seas. J. Eng. Marit. Environ. 226 (1), 23-35. 

  23. Matsumoto, K., Hirota, K., Takagishi, K., 2000. Development of energy saving shape at sea. In: Proceedings of the 4th Osaka Colloquium on Seakeeping Performance of Ships, Osaka, Japan, 17-21 October, 2000, pp. 479-485. 

  24. Matsumoto, K., 2002. "Ax-Bow": a new energy-saving bow shape at sea. NKK Tech. Rev. 86, 46-47. 

  25. Orihara, H., Miyata, H., 2003. Evaluation of added resistance in regular incident waves by computational fluid dynamics motion simulation using an overlapping grid system. J. Mar. Sci. Technol. 8, 47-60. 

  26. Park, J.H., Choi, J.E., Chun, H.H., 2015. Hull-form optimization of KSUEZMAX to enhance resistance performance. Int. J. Nav. Archit. Ocean Eng. 7 (1), 100-114. 

  27. Pinto, A., Peri, D., Campana, E.F., 2007. Multiobjective Optimization of a Containership Using Deterministic Particle Swarm Optimization. J. Ship Res. 51 (3), 217-228. 

  28. Sadat-Hosseini, H., Wu, P.C., Carrica, O.M., Toda, Y., Stern, F., 2013. CFD verification and validation of added resistance and motions of KVLCC2 with fixed and free surge in short and long head waves. Ocean. Eng. 59, 240-273. 

  29. Seo, M.G., Park, D.M., Yang, K.K., Kim, Y., 2013. Comparative study on computation of ship added resistance in waves. Ocean. Eng. 73, 1-15. 

  30. Strom-Tejsen, J., Yeh, H.Y.H., Moran, D.D., 1973. Added resistance in waves. Soc. Nav. Archit. Mar. Eng. 81, 109-143. 

  31. Tahara, Y., Peri, D., Campana, E.F., Stern, F., 2008. Computational fluid dynamics-based multiobjective optimization of a surface combatant using a global optimization method. J. Mar. Sci. Technol. 13 (2), 95-116. 

  32. Tsujimoto, M., Shibata, K., Kuroda, M., Takagi, K., 2008. A practical correction method for added resistance in waves. J. Jpn. Soc. Nav. Archit. Ocean Eng. 8, 177-184. 

  33. Tvete, M.R., Borgen, H., 2012. A Ship's Fore Body Form. PCT/NO2010/000030. 

  34. Ulstein Group, 2008. Homepage Ulstein Group. https://ulstein.com/innovations/x-bow. 

저자의 다른 논문 :

LOADING...

관련 콘텐츠

오픈액세스(OA) 유형

GOLD

오픈액세스 학술지에 출판된 논문

저작권 관리 안내
섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로