최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국표면공학회지 = Journal of the Korean institute of surface engineering, v.50 no.5, 2017년, pp.360 - 365
최한철 (조선대학교 치과대학 치과재료학교실) , 김승희 (광주보건대학교 치위생과)
In this study, ion release and biocompatibility of sintered Ni-Cr-Ti alloy for dental prosthodontics have been researched by corrosion and cell culture test. The microstructures of the alloys were observed by optical microscope, and corrosion behavior was investigated using potentiostat (Model PARST...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
일반합금소재보다 금 합금을 주로 치과에서 사용하는 이유는? | 치과 보철용으로 사용되는 국소의치는 프레임자체는 파절되는 일이 드물지만 상부 도재는 쉽게 깨질 수 있어 파절이 금속과 포셀린의 접착력과 밀접한 관계가 있다. 이들 접착력은 PFG 및 PFM 각각 동일하며 주조성, 변색, 및 부식저항성 면에서는 일반합금소재보다는 금 합금이 우수하여 금 합금을 주로 치과에서 사용하고 있다[7, 8]. 특히, 일반 금속의 부식에 대한 연구는 생체 내에서 발생되는 이온용출현상이기 때문에 독성을 유발할 수 있는 확률이 높기 때문에 이를 위한 연구가 필요하다. | |
치과용 보철물로 Ti-Cr-Ni합금 사용시 장점은? | 시판중인 4Ti-76Ni-13.5Cr-6Mo, 84Ni-16Cr합금, 및 73Co-27Cr합금보다 더 우수한 Ti-Cr-Ni합금이 필요하며 이는 잇몸친화성을 개선하고 도재의 수복특성이 개선되고 작업성 및 결합력이 좋고[4-6], 비중이 낮은 금속과 같은 소결체이기 때문에 가볍고 경제적인 것이 장점으로 평가되고 있다. | |
치과용 보철물로 Ni-Cr 및 Co-Cr 합금이 많이 사용되고 있으나 새로운 합금개발이 필요한 이유는? | 특히 PFM(porcelain fused to metal)을 이용한 금속 보철물의 사용이 치과 계에서 큰 관심이 되고 있다[1, 2]. 금을 대신할 합금으로, Ni-Cr 및 Co-Cr 합금이 많이 사용 되고 있으나 이들 금속의 부식에 의한 블랙 검 현상과 Ni알러지의 발생이 되어 이를 대신할 수 있는 합금개발이 필요하게 되었다[3]. 시판중인 4Ti-76Ni-13. |
U.J. Choi, M.H. Shin, H.S. Chung, M.W. Koh, A study on how cyclic casting of base metal alloy for dental ceramic crown may effects upon lts mechanical properties and microstructure, J Kor Aca Den Tech 25 (2003) 9-20.
C.Y. Kim, S.M. Choi, H.S. Cho, A study on EPMA on Ni-Cr alloy by Nb content for porcelain fused to metal crown, J Kor Aca Den Tech 28 (2006) 19-26.
J.S. Ahn, E.K. Ko, K.J. Joo, Comparison of shear bond strength of ceramic fused to Ni-Cr and Co-Cr alloy by heat treatment, J Kor Aca Den Tech 33 (2011) 185-192.
J.R. Bauer, A.D. Loguercio, A. Reis, L.E. Rodrigues Filho, Microhardness of Ni-Cr alloys under different casting conditions, Braz Oral Res, 20 (2006) 40-46.
H.Y. Lina, B. Bowersb, J.T. Wolanc, Z. Caid, J.D. Bumgardnere, Metallurgicalm surface, and corrosion analysis of Ni-Cr dental casting alloys before and after porcelain firing, Dent Mater 24 (2008) 378-385.
F. Faot, W.Jose da Siva, R.C.M.R. Garcia, A.A.D.B. Cury, Microstructural characterization of Ni-Cr-Mo-Ti and Ti-6Al-4V alloys used in prosthetic abutments, Rev. odonto cienc 24 (2009) 401-405.
N.J. Kim, K.S. Hwang, Y.D. Park, A comparison of marginal fitness by dental alloys, J Kor Aca Den Tech 25 (2003) 29-40.
M.H. Cho, Hardness and microstructural changes by cooling rate and holding time during porcelain firing of a multi-purpose dental gold ally, J Kor Aca Den Tech 33 (2011) 271-281.
D.M. Brunette, P. Tengvall, M. Textor, P. Thomsen, Titanium in Medicine, Springer, Germany, (2001), 2-68.
J. R. Strub, C. S. Eyer, N. K. Sarkar, Heat treatment, microstructure and corrosion of a low-gold casting alloy, J Oral Rehabil 13 (1986) 521-528.
H.S. Kim, H.C. Choe, H.S. Jang, M.K. Son, Corrosion behaviors and biocompatibility of the Ni-Cr-Mo dental casting alloy, Korean J. Met. Mater. 52 (2014) 67-72.
V.S. Saji, H.C. Choe, Electrochemical behavior of Co-Cr and Ni-Cr dental cast alloys, Trans. Nonferrous Met. Soc. China 19 (2009) 785-790
※ AI-Helper는 부적절한 답변을 할 수 있습니다.